No products




Viewed products
The PNI L21 Zbracket is designed for mounting...
Read the reviewThe PNI L21 Zbracket is designed for mounting radio aerials under the bonnet or boot.
Made from corrosion-resistant 1.3 mm thick stainless steel.
This mounting solution is suitable for vehicles without crossbars requiring the mounting of a CB, amateur radio, HF, VHF or UHF antenna.
Reference: DIAMOND-BU50A-517
Diamond BU50/A balun 1:1, genuine, operates from 1.7 to 40Mhz and allows to receive and transmit on HF bands.Technical data sheet of the HF BU50A balun:● Operating frequency from 1.7 to 40MHz●
Reference: CABLE-COAXIAL-N-M-1M-877
N Male - N Male coaxial cable with KSR195 low-loss 50 ohm coaxial cable for use from 0 to 6 GHz. Available in lengths of 1, 2, 5, 10, 15 or 20 meters.Connector 1: N MaleConnector 2: N Male
Reference: PNI-SPA135-2684
The PNI SPA135 bracket is a 5mm-thick stainless steel bracket for mounting the radio antenna on a metal or roof bar, or on the bar of a rear-view mirror (4x4, truck, machine). Ideal for fixed DV or PL
Reference: RF-KONNECT-DONUTSW-87T296-2670
TheSW donut antenna covers a reception frequency range of 4 to 24 MHz, and is compatible with an SDR receiverMalachite or other receiver for indoor short-wave reception. High-impedance (Hi-Z)
Reference: DIAMOND-RG6MR-RG58U-269
The cable antenna RG6MR Diamond is a length of 6 meters and allows you to connect an antenna with base PL259 (male UHF) on the SO239 socket (UHF female). It is equipped with a SO239 and RG58U cable
Reference: DIAMOND-RG3MR-3M-362
The cable antenna RG3MR Diamond is a length of 3 meters and allows you to connect an antenna with base PL259 (male UHF) on the SO239 socket (UHF female). It is equipped with a SO239 and RG58U cable
Reference: NAGOYA-COAX-RG58-4M-534
The cable is a length of 4 meters and allows you to connect an antenna with base PL259 (male UHF) on the SO239 socket (UHF female). It is equipped with a SO239 and RG58 50ohms cable and the other
Reference: MIDLAND-SP21-639
Mounting bracket for mirror or metal rod. Allows the installation of any mobile type antenna. Delivered with: 1 bracket only, without base or coaxial cable (optional)
The cable antenna RG6MR Diamond is a length of 6 meters and allows you to connect an antenna with base PL259 (male UHF) on the SO239 socket (UHF female). It is equipped with a SO239 and RG58U cable
24,92 €tax excl.
The cable antenna RG3MR Diamond is a length of 3 meters and allows you to connect an antenna with base PL259 (male UHF) on the SO239 socket (UHF female). It is equipped with a SO239 and RG58U cable
23,71 €tax excl.
The cable is a length of 4 meters and allows you to connect an antenna with base PL259 (male UHF) on the SO239 socket (UHF female). It is equipped with a SO239 and RG58 50ohms cable and the other
13,25 €tax excl.
Mounting bracket for mirror or metal rod. Allows the installation of any mobile type antenna. Delivered with: 1 bracket only, without base or coaxial cable (optional)
6,58 €tax excl.
Stainless steel mounting bracket SIRIO M-1. Allows the installation of mobile or portable antenna. Size: 3,8 x 6,4 x 9,9 cm. Delivered with: 1 bracket only SIRIO M-1, without base or coaxial cable
8,25 €tax excl.
Sirio N-PL Mount with SO-239 base plate for antenna installation in PL-259.N-PL Mount with protective capUp to 100 MHz, mounting hole Ø 12.5 mmUHF-Female antenna mount (SO-239)Total size: Ø 42
6,58 €tax excl.
Antenna mounting bracket, on mirror rod, Sirio ASP-1 Chrome. Maximum mounting diameter Ø 16 mm, in galvanized steel. Supplied with: 1 Sirio ASP-1 Chrome.
5,42 €tax excl.
Komunica reinforced magnetic base with triple magnet. Super-robust version and maximum grip. Base connector type SO-239 + 5 m RG-58 connector type PL-259 Delivered with : Triple mag magnetic base, 1 x
37,92 €tax excl.
The Diamond CLB is a robust mounting bracket for attaching a mobile antenna to a mast with a diameter of 10 to 52mm. This mount accepts antenna bases (not included) and standard SO-239 (UHF female).
23,25 €tax excl.
Screw-on base in SO-239 (UHF female) with 4 meter RG-316 coaxial cable and PL-259 connector (UHF male). The PL-259 connector at the end of the coaxial cable can be unscrewed to facilitate the passage
24,00 €tax excl.
Antenna socket SO-239 (UHF female) with Sirio HI-PERFORMANCE hole with 5 meter RG58 coaxial cable and FME connector, delivered with FME to PL-259 adapter. Delivered with: 1 Sirio Hi-performance
26,33 €tax excl.
Stainless steel mounting bracket to install a mobile or portable type antenna on a mast from 15 to 33mm. Accepted mast diameter: 15mm to 32mmSize: 85 x 60 mm The mounting base is not included, our
16,58 €tax excl.
The PNI T941 bracket is designed for permanent mounting of a PL259 type antenna.Material: Stainless steel Bracket type: Fixed, on body Station connection socket: PL259 Antenna support: Yes Cable: 5
12,60 €tax excl.
The PNI SPA135 bracket is a 5mm-thick stainless steel bracket for mounting the radio antenna on a metal or roof bar, or on the bar of a rear-view mirror (4x4, truck, machine). Ideal for fixed DV or PL
5,75 €tax excl.
Shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal
Copyright 2014-2025 - Passion Radio / 4 MY PEOPLE.
Les photos et coloris ne sont pas contractuels.