PowerBlast 30 2.4 Ghz 30W amplifier, LDMOS semiconductor, compatible for amateur radio activities on the QO-100 satellite.Operates with a 32V power supply and an input power of 400 mW (26 dBm) for a
BI7JTA's Raspberry Pi duplex MMDVM hotspot is a multimode digital access point: D-Star, DMR, C4FM, P25, POCSAG and NXDN, for the amateur radio bands VHF 144-148Mhz and UHF 430-450Mhz, with 10mW
The VGC VR-N7500 BT from VERO Telecom represents a new development in the field of amateur radio transceivers.It is the first dual-band 145/430Mhz FM analog mobile without screen and fully controlled
The NanoVNA-F is the enhanced version of the open-source Antenna and Vector Network (VNA) analyzer that covers the HF, VHF and UHF bands from 50 KHz to 1500 MHz with metal case and large screen (11cm)
Bluetooth dongle open source 2.4 GHz come to use development platform and undertake trials in Bluetooth Class 1. The true power of Ubertooth One is the ability to write your own software to suit your
The Yard Stick One dongle (Yet Another Radio Dongle) can transmit and receive half-duplex digital radio signals on frequencies of 300-348 MHz, 391-464 MHz and 782-928 MHz, in modulations: ASK, OOK,
The pager GP2009N receives and displays alphanumeric messages and/or receives and announces voice messages. It vibrates and beeps or flashes to attract attention. Available in 2 versions for amateur
This 144/432Mhz mixer to the 2.4GHz band is intended to be used as a dedicated up-converter to traffic on the uplink of the QO-100 satellite. The included SAW filter allows system size reduction as
The Analog Devices CN0417 is a small RF power amplifier, powered by micro-USB, optimized to operate on 2400 MHz with 100mW max, gain of 20-21dB max., with a integrated bandpass filter 2400 to
2.4 Ghz linear amplifier with a power of 2W (33dBm), compatible with amateur radio activities on the QO-100 satellite (by using an optional bandpass filter).Works with a 5V power supply and an input
EDUP EP-AB003 amplifier for the amateur radio band 2400Mhz (13cm), this 2.4Ghz amp of 8W theoretical, is able to deliver an effective power of 3-4W max. with an input of 100mW maximum.This equipment
The BT-100 is a TX power amplifier, powered by Bias-T, to connect to the SMA TX socket of the bladeRF 2.0 micro xA4 and xA9.MMIC: PHA-1H +TX frequency: 50 MHz to 6 GHzConsumption: 200mWBlue LED power
The BT-200 is a RX LNA, powered by Bias-T, to connect to the SMA RX socket of the bladeRF 2.0 micro xA4 and xA9.MMIC: TSS-53LNB+TX frequency: 500 MHz to 5 GHzConsumption: 300mWGreen LED power
The Taoglas Airvu 2.4Ghz bandpass filter is a 100Mhz broadband filter, for use in frequency from 2400 to 2500Mhz and a maximum power of 10W.Connector 1: RP-SMA MaleConnector 2: RP-SMA Female Note:
Codura Nylon walkie-talkie harness, made in the USA, allows you to wear radio equipment on the front at the shoulder.Holster available in 2 pocket sizes for the walkie-talkie S for small walkie talkie
EDUP EP-AB007 amplifier for the amateur radio band 2400Mhz (13cm), this 2.4Ghz amp of 4W theoretical, is capable of delivering an effective power of 2W with a power input of 100mW max.This RF
Diamond SRH951S handy antenna 144/430/1200MHz (2m/70cm/23cm) + Air band 120/150/300/450/800 and 900MHz (receiving only). With SMA male connector, compatible with Wouxun handheld. Length: 35cm
The Othernet Bullseye LNB is a down-converter for reception of the Oscar 100 amateur radio and those in the Ku band. The Bullseye is one of the most stable and precise LNB to date. It does not need to
This Nagoya mounting bracket allows to deport a walkie-talkie antenna to fix it on a window car. Antenna support connector: SMA Male Antenna cable connector: SMA Female, SMA male or BNC Male (to
Plastic housing for Bluestack Micro / Micro + (Plus) and DVmega dual-band hat only (not included).Case made in 3D printing. Simple installation without tools.The diameter of the antenna hole is 10mm,
Nagoya's new 144/430Mhz antenna model for VHF-UHF dual-band radio walkie talkie 2m/70cm. The Nagoya NA-24J is designed for 144 and 430Mhz bands and is 39.2cm long. With female SMA connector for
This antenna Nagoya NA-707 is tilting and telescopic (61cm unfolded, 15,8cm folded), for effective reception from 80Mhz to 1000Mhz (announced RX from 1.8Mhz to 1800Mhz by the manufacturer), and can be
This large Nagoya NA-770 telescopic antenna measures 85.7cm unfolded and 22.3cm folded. Reception from 80Mhz to 900Mhz and can be used in transmission on 144 / 430Mhz bands. Because of its size, this
SMA female to UHF Female Adapter. RG 316 coaxial cable 50 ohms, about 15cm long.
Inverto LNB Single Series Black Premium, universal satellite receiver, with a gain up to 65dB and a low noise factor of 0.2dB. Compatible with all major satellites and the Oscar-100 amateur
MCX male to MCX male RF adapter. MCX connectivity is, for example.compatible, with DVB-T TNT USB Dongle and QRP X5105 FI output for panadapter use. Coaxial cable RG 316 50 ohms. Available in 15cm,
MCX Male to BNC Female Adapter. The MCX connector is compatible with the USB Dongle DVB-T RTL2832 +R820T & R820T2. Coaxial cable RG 316 50 ohms. Available in 15cm, 50cm or 1 meter length (to
MCX Male to BNC Male Adapter. RG 316 coaxial cable 50 ohms, about 15cm long.
Pigtail cable adapter F Male to UHF Female with coaxial cable RG316, 50 ohms, 15cm. The F connector is particularly used for satellite equipment.
ZigBee 2.4 Ghz USB stick with integrated PCB antenna and based on the original RF chip CC2531 from Texas Instrument with a power of 2.5mW, integrated LNA, TCXO, 2 push buttons and case.Supplied with:
Coaxial cable 50 ohms low loss KSR195 5mm, for use from 0 to 6Ghz and with an MCX Male connector at one end and without connector at the other end (bare end to be welded or crimped).Length: Available
MCX Male to UHF Male RF Adapter. RG 316 coaxial cable 50 ohms, about 15cm long.
RF adapter MCX female to UHF female. Cable coaxial RG 316 50 ohms, 15 cm long.
Socket base N female soldering.
PERF2+ is an electronic prototyping board designed for electronics enthusiasts and to make prototyping easier and faster. Perf2+ is a double-sided circuit board with perpendicular marks on each side.
Socket base SO-239 (UHF female) soldering.
MMIC prototype circuit for connection with coaxial cable. Supplied without connector (coaxial soldering).This compact prototype board is compatible with more than 100 of the most popular MMIC
MMIC prototype circuit on PCB for connection with SMA connectors (available as an option below).Supplied without SMA connector (solder).Fits standard SMA PCB connectors, including with SMA
Lanyard with detachable clip, carabiner hook and tie-portable. This lanyard allows to hang a mobile phone or a mini-pocket, handheld like Baofeng UV-5R, which has a metal clip for attaching a hook.
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal