Exceptional closure: From January 22 to 29, 2021, shipments resumes from February 1, 2021.
Reference: DIAMOND-MCRMSMA-142
Diamond MCRMSMA is a magnet base bracket for handheld transceivers and any devices with SMA connector. Coaxial cable: RG58 2.5m Connector: SMA Male / SMA FemaleMagnet diameter: 53mm
Reference: DIAMOND-MCRMBNC-1036
Diamond MCRMBNC is a magnet base bracket for handheld transceivers and any devices with BNC connector. Coaxial cable: RG58 2.5m Connector: BNC Male / BNC FemaleMagnet diameter: 53mm
Reference: MINIVNA-CALIBRATION-727
This calibration kit can be used with any SMA connector device, such as the MiniVNA Tiny and PRO2.The SMA calibration kit consists of a dummy load of 50 ohms, an open circuit and a short
Reference: PIGTAIL-SMA-F-MUHF-M-840
RF cable pigtail adapter SMA Female to Mini-UHF Male.Coaxial cable RG316 50 ohms of 30 cm length.Impedance: 50 ohms
Reference: NAGOYA-RB16SP-SMA-F-529
Magnetic mount Nagoya RB-16-SP with antenna support connector in SMA male, for walkie-talkie to deport the antenna of the handheld (for example in car or at home).Coaxial cable: RG174 50 Ohms 3 meters
Reference: ADAPT-DIAMOND-BNCPSMAJ-257
Adapter for walkie-talkie, handheld VHF-UHF or scanner equipped BNC to use SMA antennas.- The adapter has a BNC Male connector on one side and the other is SMA Female- The design is specially adapted
Reference: ADAPT-DIAMOND-SMAJSMAJ-276
Adapter for walkie-talkie, handheld VHF-UHF or scanner equipped SMA to use SMA antennas.- The adapter has a SMA Female connector on one side and the other is SMA Female- The design is specially
Reference: CABLE-COAXIAL-SMA-M-UHF-1M-305
Coaxial cable SMA Male to UHF Male with 50-ohm coaxial cable low loss KSR195 for use from 0 to 6GHz.Length: 1, 2, 5 or 10 metersConnector 1: SMA MaleConnector 2: UHF Male
Reference: PIGTAIL-SMA-M-RCA-M-682
Pigtail adapter cable SMA Male to RCA Male. Coaxial cable RG174 50 ohms120cm lenght
Reference: ADAPT-SMA-ATTENUA3-826
This adapter is a SMA attenuator available in version -3, -6, -10, -15, -20 or -30dB for frequencies from 0 to 6 Ghz.Connector end 1: SMA maleConnectique end 2: SMA femaleImpedance: 50 OhmsPower
Reference: ADAPT-SMA-CHARGE2-577
This connector is a male SMA terminator endowed with a dummy load 50 Ohms for a maximum power of 1 watt on frequencies from 0 to 6Ghz. Connectors end 1: SMA maleConnectors end 2: Dummy load 1W max
Reference: CABLE-COAXIAL-SMA-COUDE-1M-932
KSR195 low loss 50 ohm coaxial cable for use from 0 to 6Ghz, with angled SMA connector and straight SMA connector.Available lengths: 50cm, 1 or 2 metersConnector 1: SMA Male angledConnector 2: SMA
Reference: CABLE-COAXIAL-SMA-M-MCX-1M-306
Coaxial cable SMA Male to MCX Male with 50-ohms coaxial cable low loss KSR195 for use from 0 to 6GHz.Length: 1 or 5 metersConnector 1: SMA MaleConnector 2: MCX Male
Reference: CABLE-COAX-F-M-SMA-1M-875
RF coaxial cable F Male to SMA Male, with RG58 coaxial cable, available in 1, 2, 5 or 10m. The F connector is particularly used for TV and satellite equipment.
Reference: PIGTAIL-SMA-M-N-F-79
SMA Male to N Female Adapter. Coaxial cable RG 316 50 ohms. Available in 15cm, 50cm or 1 meter length (to choose from below).
Reference: CABLE-COAXIAL-SMA-M-1M-302
Cable SMA Male to SMA Male with 50-ohm coaxial cable low loss KSR195 for use from 0 to 6GHz.Length: 0,5m (50cm), 1, 3 or 5 metersConnector 1: SMA MaleConnector 2: SMA Male
Reference: CABLE-COAXIAL-SMA-M-1M-4959
Coaxial cable 50 ohms low loss KSR195 5mm, for use from 0 to 6Ghz and with an SMA Male connector at one end and without connector at the other end (bare end to be welded or crimped).Length: Available
Reference: PIGTAIL-SMA-F-UHF-F-599
SMA female to UHF Female Adapter. RG 316 coaxial cable 50 ohms, about 15cm long.
Reference: ADAPT-N-M-SMA-F-601
RF adapteur N Male to SMA female. Nickelplated.
Reference: ADAPT-N-F-SMA-M-82
Adapter SMA Male to N Female.
Reference: PIGTAIL-SMA-M-BNC-F-83
SMA Male to BNC Female Adapter. RG 316 coaxial cable 50 ohms, about 15cm long.
Reference: COAX-RG402-RP-SMAM-SMAF-10CM-994
This RG402 coaxial cable converts a RP-SMA male connector to a SMA female connector. Suits for example for WIFI devices and application. Beware this adapter is a Reverse SMA (RP). Available in 10, 15
Reference: PIGTAIL-SMA-M-UHF-M-77
SMA Male to UHF Male Adapter. RG 316 coaxial cable 50 ohms, about 15cm long.
Reference: COAX-RG402-RP-SMA-M-SMA-M-993
This RG402 coaxial cable converts a RP-SMA male connector to a SMA Male connector. Suits for example for WIFI devices and application. Beware this adapter is a Reverse SMA (RP). Note: This cable is
Reference: PIGTAIL-SMA-M-SMA-F-15CM-996
This RG316 pigtail coaxial cable converts a SMA Male connector to a SMA female connector. Available in 15cm, 50cm, or 1 meter to choose below.
Reference: PIGTAIL-RP-SMA-M-SMA-F-995
This RG316 pigtail coaxial cable converts a RP-SMA male connector to a SMA female connector. Suits for example for WIFI devices and application. Beware this adapter is a Reverse SMA (RP).
Reference: ADAPT-MUHF-M-SMA-F-842
RF adapteur Mini-UHF Male to SMA Female. Nickelplated, 50 ohms.
Reference: CABLE-RG402-SMA-COUDE2-991
Very low loss RG-402 coaxial cable with angled SMA Male on both side, 50 ohms and with a length of 10cm. Note: This rigid cable can be bent but once installed in its position of use, the cable must
Reference: PIGTAIL-SMA-M-UHF-F-80
SMA Male to UHF Female Adapter. RG 316 coaxial cable 50 ohms, about 15cm long.
Reference: PIGTAIL-SMA-M-BNC-M-15CM-78
Coaxial cable with BNC Male - SMA Male connector with coaxial cable RG316 ohms for use in frequency from 0 to 3000Mhz.Available in different lengths: 15cm, 30cm or 50cmConnector 1: BNC MaleConnector
Reference: ADAPT-SMA-F-TV-M-997
This RF adapter converts a SMA female connector to a TV male connector. Sold individually.
Reference: CABLE-RG58-BNC-SMA-50CM-1116
Coaxial cable with BNC Male - SMA Male connector with coaxial cable RG58 MIL-C-17 50 ohms for use in frequency from 0 to 1000Mhz.Available in different lengths: 30cm, 50cm, 1m or 2 metersConnector 1:
Reference: CABLE-RG402-SMA-COUDE1-990
Very low loss RG402 coaxial cable with straight SMA Male and angled SMA Male, for example to connect a 2400 Mhz amplifier to a converter OQ-100, or any use requiring a very low loss cable. Coaxial
Reference: ADAPT-SMA-M-BNC-F-85
Adaptateur SMA Male vers BNC Femelle. Compatible avec la carte converter HF Ham It Up, HackRF et le récepteur SDR FUNcube Dongle Pro+.
Reference: PIGTAIL-UFL-SMA-F-872
RF pigtail U.FL / UFL to SMA female with RG178 coaxial cable, impedance 50 ohms, 15cm length.The U.FL connector is also called UFL, IPEX, IPAX, IPX, MHF, AMC and UMCC.This U.FL / UFL cable is
Reference: ADAPT-SMA-M-BNC-M-839
RF Adapter SMA Male to BNC Male.Frequency of use: From 0 to 3 GhzIn nickel and brass plated GOLDImpedance: 50 Ohms
Reference: PIGTAIL-F-M-SMA-M-736
Pigtail RF adapter F Male to SMA Male, with RG316 coaxial cable, available in 3 lenght: 15cm, 50cm or 1 meter. The F connector is particularly used for TV and satellite equipment.
Reference: ADAPT-F-M-SMA-F-730
RF adapteur F Male to SMA female. Nickelplated. The F connector is particularly used for satellite equipment.
Reference: ADAPT-SMA-M-TV-F-246
This RF adapter converts a SMA male connector to a Female TV connector. This RF Adapter lets you connect an indoor or outdoor TV antenna on a equipment with an SMA female connectors in it.
Reference: CABLE-COAX-RG402-SMA-M-10CM-989
Very low loss coaxial cable with SMA Male connector on each end, for example to connect a 2.4Ghz amplifier to a transverter for OQ-100, or any use requiring a very low loss cable like the
Reference: PIGTAIL-MCX-M-SMA-M-52
MCX Male to SMA Male RF Adapter. The MCX connector is compatible with the USB Dongle DVB-T RTL2832 +R820T & R820T2.RG 316 coaxial cable 50 ohms, about 15cm long.
Reference: ADAPT-F-M-SMA-M-731
RF adapteur F Male to SMA Male. Nickelplated. The F connector is particularly used for satellite equipment.
Reference: PIGTAIL-UFL-SMA-M-874
RF cable pigtail adapter UFL / U.FL (IPEX ) to SMA Male with RG178 coaxial cable of 15cm length and impedance of 50 ohmsThe UFL connector is also called U.FL, IPX, MHF, IPEX, IPAX, UMCC. and AMC.
Reference: ADAPT-SMA-M-BNC-F2-275
RF adapter for walkie-talkie, handheld VHF-UHF or scanner, equipped with SMA female connector and to use a BNC male antenna. - The adapter is equipped with an SMA Male connector on one side and the
Reference: ADAPT-BNC-SMA-TALKIE-547
Adapter for walkie-talkie (handheld) BNC female <> SMA Female. Compatible with Baofeng and Wouxun dual-band handhelds.
Reference: ADAPT-UHF-F-SMA-F-49
RF Adapter connector UHF Female <> SMA Female, compatible for example with Baofeng and Wouxun walkie-talkie dual-band handheld HT.Professional quality with gold contacts.
Reference: ADAPT-SMA-CHARGE1-576
This connector is a male SMA terminator/termination endowed with a dummy load 50 Ohms for a maximum power of 1 watt on frequencies from 0 to 3Ghz. Connectors end 1: SMA maleConnectors end 2: Dummy
Reference: ADAPT-SMA-M-UHF-F-67
SMA Male UHF Female (SO-239) Adapter.
Reference: PIGTAIL-SMA-M-SMA-M-81
Pigtail RF adapter SMA Male to SMA Male to connect for example a converter Ham it up to a HackRF One, or SDRPlay, and any device with a SMA female connector. Coaxial cable RG 316 50 ohms. Available in
Reference: ADAPT-RP-SMA-F-SMA-F-263
This RF adapter converts a RP-SMA Female connector to a SMA Female connector. Beware this adapter is a Reverse SMA (RP). It is mainly used in WIFI connections.
Reference: ADAPT-BNC-F-SMA-F-55
Female BNC Adapter <> SMA Female.
Reference: ADAPT-RP-SMA-M-SMA-F-290
This RF adapter converts a RP-SMA male connector to a SMA Female connector. Suits for WIFI devices and application. Beware this adapter is a Reverse SMA (RP). It is mainly used in WIFI connections.
Reference: ADAPT-RP-SMA-M-SMA-M-262
This RF adapter converts a RP-SMA male connector to a SMA Male connector. Beware this adapter is a Reverse SMA (RP), it is mainly used in WIFI application.
Reference: ADAPT-SMA-M-SMA-F-575
This RF adapter converts a SMA male connector to a SMA Female connector. Connector 1: SMA male Connector 2: SMA male Impedance: 50 OhmsPlatting: Nickel plated
Reference: ADAPT-RP-SMA-F-SMA-M-289
This RF adapter converts a RP-SMA Female connector to a SMA Male connector. Suits for WIFI devices and application. Beware this adapter is a Reverse SMA (RP). It is mainly used in WIFI connections.
Reference: ADAPT-SMA-M-SMA-M-291
This RF adapter allows is equipped with an SMA Male connector on both sides.It allows to connect for example 2 cables or connectors in SMA female.
Reference: ADAPT-SMA-F-SMA-F-292
This RF adapter allows is equipped with an SMA Female connector on both sides.It allows to connect for example 2 cables or connectors in SMA Male.
Reference: ADAPT-MCX-M-SMA-F-260
This RF adapter converts a MCX male connector to a SMA Female connector. RF Adapter to connect an indoor or outdoor antenna on a equipment with an MCX female connectors in it such as DVB-T SDR USB
Reference: QO100-ADAPT-F-M-COUDE-748
RF adapter angled 90° F Male - F Female. The F connector is particularly used for satellite equipment.
Reference: ADAPT-SMA-PCB2-837
Straight RF connector SMA female to solder on PCB.Frequency of use: From 0 to 3 GhzBrass plated GOLDImpedance: 50 OhmsDimensions : 13,41 x 6.5 x 6.5 mmThis RF connector is manufactured in accordance
Reference: ADAPT-SMA-PCB1-56
Right angle RF connector SMA female, to solder on PCB.Frequency of use: From 0 to 3 GhzBrass plated GOLDImpedance: 50 OhmsDimensions : 15,46 x 6 x 6 mmThis RF connector is manufactured in accordance
Reference: ADAPT-SMA-PCB3-838
Female SMA RF connector to be screwed on.Frequency of use: From 0 to 3 GhzBrass plated GOLDImpedance: 50 OhmsThis RF connector is manufactured in accordance with MIL-C-39012 and CECC 22110/166.
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal