USB There are 5 products.

• 

  New!

  Available

  USB power cable 5V 9V or 12V Ripcord

  With the Ripcord USB power cable, you have the freedom to power anywhere you are any device in 5, 9 or 12V from a USB port of a laptop, from an external battery or from a smartphone/tablet (with OTG cable).The connector is on one side USB A Male, to connect to a laptop eg. and on the other side standard 5.5mm jack connector with the positive (+) polarity in the center and the negative (-) polarity on the outside.Maximum amperage on the 5V...

  With the Ripcord USB power cable, you have the freedom to power anywhere you are any...

  With the Ripcord USB power cable, you have the freedom to power anywhere you are any device in 5, 9 or 12V from a USB port of a laptop, from an external battery or from a...

  16,25 €
• 

  Available

  Micro-USB power cable black or white

  This USB cable to micro-USB can be used as power cable for Raspberry Pi, cell phone Samsung S3, S4, S5 or any device with micro USB power port.

  This USB cable to micro-USB can be used as power cable for Raspberry Pi, cell phone...

  This USB cable to micro-USB can be used as power cable for Raspberry Pi, cell phone Samsung S3, S4, S5 or any device with micro USB power port.

  1,63 €
• 

  Available

  USB 2.0 cable Male A-B 3 meters for printer...

  USB 2.0 Male A - Male B cable, transparent blue with ferrite and 3 meters long. It allows the use of a printer or SDR Ham It Up converter card or the SDRPlay RSP receiver. Thanks to its length of 3 meters, this USB cable will allow you to space the hardware of the computer to which it is connected. Also available in black and 1.5 meters.

  USB 2.0 Male A - Male B cable, transparent blue with ferrite and 3 meters long. It...

  USB 2.0 Male A - Male B cable, transparent blue with ferrite and 3 meters long. It allows the use of a printer or SDR Ham It Up converter card or the SDRPlay RSP receiver....

  Reduced price! 4,50 €
• 

  Available

  USB 2.0 Male A-B cable for Ham It Up & SDRPlay RSP

  This is USB 2.0 A Male to 4 Pin B Male is for use with the SDR converter Ham It Up and receiver SDRPlay RSP (all version). Also available in 3 meters lenght. Also suitable forr printer or scanner.

  This is USB 2.0 A Male to 4 Pin B Male is for use with the SDR converter Ham It Up and...

  This is USB 2.0 A Male to 4 Pin B Male is for use with the SDR converter Ham It Up and receiver SDRPlay RSP (all version). Also available in 3 meters lenght. Also suitable...

  Reduced price! 3,00 €
• 

  Available

  USB programming cable pager GP2009N &...

  Programming cable for pager POCSAG GP2009N & Alphapoc 602R. Comes with: 1 USB cable, 1 adapter for pager, 1 power chargeur 220V EU.

  Programming cable for pager POCSAG GP2009N & Alphapoc 602R. Comes with: 1 USB...

  Programming cable for pager POCSAG GP2009N & Alphapoc 602R. Comes with: 1 USB cable, 1 adapter for pager, 1 power chargeur 220V EU.

  24,92 €