RF tools

Selection of tools and tooling for electronics and RF.

Showing 1 - 36 of 36 items
  • 0 to 3GHz 200W 50-ohm dummy load with N male connector
    65,80 €

    Reference: RFKONNECT-CHARGE-78T953-2201

    0 to 3GHz 200W 50-ohm dummy load with N male connector

    200W 50 Ohm Dummy Load with N Male connector.Duty cycle :10 seconds max. at 200W 120 seconds max. at 100W 40W continuous

    65,80 €
  • Dummy load Diamond DL-50N 0-1500Mhz 50 ohms 15W
    62,92 €

    Reference: DIAMOND-DL50N-1736

    Dummy load Diamond DL-50N 0-1500Mhz 50 ohms 15W

    This 50 ohm Diamond DL-50N dummy load operates from 0 to 1500Mhz with a maximum power of 15W, N male connector.Frequency: DC-1500 MHz Power Rating: 15 watts continuous, 100 watts peak Connector:

    62,92 €
  • DC dummy load at 1GHz 100W Max. 50 Ohms with UHF male connector (PL-259)
    57,50 €

    Reference: RFKONNECT-CHARGE-81T411-2200

    DC dummy load at 1GHz 100W Max. 50 Ohms with UHF male connector (PL-259)

    High quality 100W DC-1GHz 50 ohm RF dummy load with PL259 connector.- Power: 100W Max (intermittent) 20W Max (continuous)- Power cycle : 20W (AVG intermittent 5min Tx 5 min Rx), 50W (AVG intermittent

    57,50 €
  • Dummy load Diamond DL-50A 0-500Mhz 50 ohms 15W
    34,13 €

    Reference: DIAMOND-DL50A-1735

    Dummy load Diamond DL-50A 0-500Mhz 50 ohms 15W

    This 50 ohm Diamond DL-50A dummy load operates from 0 to 500Mhz with a maximum power of 15W, UHF male connector (PL-259)Frequency: DC-500 MHz Power Rating: 15 watts continuous, 100 watts peak

    34,13 €
  • POWERPOLE Anderson 15/30/45A crimping tool
    29,10 €

    Reference: RFKONNECT-PINCE-81T636-2236

    POWERPOLE Anderson 15/30/45A crimping tool

    YFL-1545 High quality crimping tool for Anderson 15/30/45AMP connectorSpecification:- Model: YFL-1545- Crimping range: 15/30/45AMP- Length: 245mm- Weight: 0.56kg- Applicable terminal: for Anderson

    29,10 €
  • Crimping tool for coaxial cable RG58 RG59 RG213 RG214
    24,90 €

    Reference: RFKONNECT-PINCE-81T637-2237

    Crimping tool for coaxial cable RG58 RG59 RG213 RG214

    S-457 Crimping tool High quality crimping tool for cable and coaxial wire terminal for LSD terminalSpecification:- Model: S-457- Application: Coaxial cable- Crimping capacity: 11/8.3/5.4mm- Body

    24,90 €
  • Dummy load 0-500 MHz 50 Ohm 15W Nagoya Antenna RF measuring devices NAGOYA-L20-UHF-456
    19,67 €

    Reference: NAGOYA-L20-UHF-456

    Dummy load 0-500 MHz 50 Ohm 15W Nagoya L20

    This dummy load 50 ohms Nagoya L20 runs from 0 to 500MHz with a maximum power of 15W or 100W (during 2 seconds max), with UHF male connector (PL-259) or N male plug (choose below). Genuine Nagoya

    19,67 €
  • EMC EMI RF 9 KHz to 3 GHz probe kit SMA connector
    16,63 €

    Reference: RFKONNECT-SONDE-81T625-2231

    EMC EMI RF 9 KHz to 3 GHz probe kit SMA connector

    PROBE EMC EMI Near Field Conduction Simple Magnetic Field Probe Kit with SMA ConnectorSpecification:- Working frequency: 9K - 3G- Weight: 21g- Connector: SMA female (SMA-K)Included in the package:- 5

    16,63 €
  • Work mat for soldering repairs thermal and static protection
    16,60 €

    Reference: RFKONNECT-TAPIS-81T656-2241

    Work mat for soldering repairs thermal and static protection

    S-170 Double Motherboard Position Soldering Mat Heat-resistant Silicon Soldering Mat for Electronics Repair Platform- Anti-slip and anti-static design- High-temperature resistance up to 500℃. and the

    16,60 €
  • 0 to 3GHz 10W 50-ohm dummy load with SMA male connector
    16,60 €

    Reference: RFKONNECT-CHARGE-81T413-2203

    0 to 3GHz 10W 50-ohm dummy load with SMA male connector

    High Quality 10W SMA Male Connector Dummy Load 50ohm DC0 - 3GHz RF Coaxial Load Radio AccessorySpecification :- Power : 10W- SWR : ≤1.20- Impedance : 50ohm- Frequency range : DC 0 - 3.0GHz-

    16,60 €
  • 0 to 3GHz 10W 50-ohm dummy load with N male connector
    16,60 €

    Reference: RFKONNECT-CHARGE-81T412-2202

    0 to 3GHz 10W 50-ohm dummy load with N male connector

    High Quality 10W N-Type Male Connector Dummy Load 50ohm DC0-3GHz Coaxial Load Radio AccessorySpecification:- Housing material: brass. Ternary alloy coating- Insulation material: PTEF- Inner conductor:

    16,60 €
  • SMA Calibration Kit with 50 Ohm dummy load for MiniVNA Passion Radio SMA MINIVNA-CALIBRATION-727
    16,58 €

    Reference: RF-KONNECT-87T299-CALIBRA-727

    SMA Calibration Kit with 50 Ohm dummy load for MiniVNA NanoVNA & VNA

    This calibration kit can be used with any SMA connector device, such as the MiniVNA Tiny and PRO2 or NanoVNA and any VNA.The SMA calibration kit consists of a dummy load of 50 ohms, an open circuit

    16,58 €
  • 220V digital wattmeter LCD energy meter
    14,90 €

    Reference: RFKONNECT-WATTM-81T659-2245

    220V digital wattmeter LCD energy meter

    Euro-Standard Backlight Power Meter Multifunctional Power Meter Analyzer with LCD Display- You can determine the current. voltage. power consumption. and the cost of the appliances connected to it.-

    14,90 €
  • RF attenuator SMA 0-6 Ghz from -3 to -30dB 2W Passion Radio SMA ADAPT-SMA-ATTENUA3-826
    8,25 €

    Reference: ADAPT-SMA-ATTENUA3-826

    RF attenuator SMA 0-6 Ghz from -3 to -30dB 2W

    This adaptor is an SMA male attenuator available in -3, -6, -10, -15, -20 or -30dB versions for operating frequencies from 0 to 6 GHz. This attenuator is symmetrical and can be used in both

    8,25 €
  • SMA termination male 6Ghz - Dummy load 1W Passion Radio SMA ADAPT-SMA-CHARGE2-577
    8,25 €

    Reference: ADAPT-SMA-CHARGE2-577

    6Ghz SMA male termination - 1W dummy load

    This connector is an SMA male terminated with a 50 Ohm dummy load for maximum power of 1 Watt at frequencies from 0 to 6 GHz. Terminal 1 : SMA maleTerminal 2 : Dummy load 1W maximum continuous

    8,25 €
  • Demo Kit PCB and RF testboard to assemble for VNA & NanoVNA
    7,42 €

    Reference: RFKONNECT-PCB-DEMO-KIT2-1077

    Demo Kit PCB and RF testboard to assemble for VNA & NanoVNA

    This NanoVNA RF demo kit is composed of a PCB to assemble, to perform tests or demonstration of RF integrated circuit (DIP) and SMT (SMT) components.Adapted to work with vector network analyzer

    7,42 €
  • Set of 25 precision screwdrivers
    7,40 €

    Reference: RFKONNECT-TROUSSE-81T658-2244

    Set of 25 precision screwdrivers

    25 pieces screwdriver sets Omnipotent Repair Tool for Electronics Maintenance with Aluminum Handle and Carbon Steel HeadApplication:- Hamradio, homebrew, mobile phone. camera. fans. laptop. toys.

    7,40 €
  • Box of 150 pieces of heat-shrink tubing
    7,40 €

    Reference: RFKONNECT-GAINE-81T405-2195

    Box of 150 pieces of heat-shrink tubing

    Packaged box DIY Heat Shrink Tube Insulation Sleeve for Electric Wire and Cable Flame Retardant Shrink TubeMethod of use:- Prepare the tools- Insert the wires to be connected into the heat-shrink

    7,40 €
  • Small soldering work mat 30x20cm
    6,60 €

    Reference: RFKONNECT-TAPIS-81T657-2242

    Small soldering work mat 30x20cm

    30 x 20cm Silicon Soldering Mat for Maintenance of High Temperature Insulation Pads for Mobile PhonesSpecification:- Size: 30 x 20cm- Net weight: 80g- Material: High density silicon- Application: for

    6,60 €
  • 20 mm fire-retardant heat-shrink tubing with adhesive 1 metre
    5,80 €

    Reference: RFKONNECT-G20MM81T616-2226

    20 mm fire-retardant heat-shrink tubing with adhesive 1 metre

    High quality 4:1 black adhesive heat shrink tube 1M x 20MM Insulation tube for wire protectionDescription:- High temperature 4:1 heat shrink, fully bonded to the wire with effective insulation

    5,80 €
  • PCB RF attenuator from -10dB to -30dB max. power 200mW (23dBm) SDR accessories XLA-PCB-ATTENUATOR-1011
    5,19 € 7,42 € tax excl. -30%tax excl. In stock

    -30%

    Reference: RFKONNECT-PCB-ATTENUATEUR-1011

    PCB RF attenuator from -10dB to -30dB max. power 200mW (23dBm)

    This PCB-based RF attenuator module reduces the power of a radio signal by -10 to -30dB, with a maximum input power of 23dBm (200Mw), with female SMA connector, for use from 0 to 4000Mhz (4Ghz).

    5,19 €

    7,42 €

    Reduced price!
  • Termination SMA male 3Ghz - Dummy load 1W Passion Radio SMA ADAPT-SMA-CHARGE1-576
    4,50 €

    Reference: ADAPT-SMA-CHARGE1-576

    SMA male 3Ghz termination - 1W dummy load

    This connector is an SMA male terminated with a 50 Ohm dummy load for maximum power of 1 Watt at frequencies from 0 to 3Ghz. Terminal 1 : SMA maleTerminal 2 : Dummy load 1W maximum continuous

    4,50 €
  • RP-SMA termination male 3Ghz - Dummy load 1W Passion Radio RP-SMA ADAPT-RP-SMA-CHARGE3-579
    4,50 €

    Reference: ADAPT-RP-SMA-CHARGE3-579

    RP-SMA male 3Ghz termination - 1W dummy load

    This connector is an RP-SMA male terminated with a 50 Ohm dummy load for maximum power of 1 Watt at frequencies from 0 to 3Ghz. Terminal 1 : RP-SMA male (Reverse SMA)Terminal 2 : Dummy load 1W maximum

    4,50 €
  • Blue Plato electronic cutting pliers
    4,10 €

    Reference: RFKONNECT-PINCE-81T638-2238

    Blue Plato electronic cutting pliers

    170 Diagonal pliers with shiny blue handle High-quality, portable industrial levelling pliers for PLATOIncluded in the package:- 1 x Diagonal pliers

    4,10 €
  • Multifunctional coaxial cable stripper for RG58 RG59 RG174
    4,10 €

    Reference: RFKONNECT-PINCE-81T633-2235

    Multifunctional coaxial cable stripper for RG58 RG59 RG174

    Multifunctional coaxial cable stripper Portable twin-blade stripper- Twin-blade design. allows blade depth adjustment.- Integrated hexagonal key- Mini size. easy to carry- Wear-resistant blade. allows

    4,10 €
  • FTDI USB to TTL 3.3V 5.5V converter FT232
    3,30 €

    Reference: RFKONNECT-FTDI-FT232-81T420-2210

    FTDI USB to TTL 3.3V 5.5V converter FT232

    3.3V/5V FT232RL USB to TTL Serial Adapter Module Mini Interface with Overcurrent Protection FunctionDescription :- 6 pins definition : DTR. RX. TX. VCC. CTS. GND.- Reader download address:

    3,30 €
  • Antistatic wristband
    3,30 €

    Reference: RFKONNECT-BRACELET-81T408-2198

    Antistatic wristband

    3M Blue PU Wired Anti-Static Bracelet Fast Release of Static Electricity for Industrial Electronic MaintenanceDescription:- Human skin is in direct contact with the static conductive material of the

    3,30 €
  • BNC male 3Ghz termination - Dummy load 1W Passion Radio BNC ADAPT-BNC-CHARGE4-580
    3,29 €

    Reference: ADAPT-BNC-CHARGE4-580

    BNC male 3Ghz termination - 1W dummy load

    This connector is a BNC male terminated with a 50 Ohm dummy load for maximum power of 1 Watt at frequencies from 0 to 3Ghz. Terminal 1 : BNC maleTerminal 2 : Dummy load 1W maximum continuous Impedance

    3,29 €
  • 12 mm fire-retardant heat-shrink tubing 1 metre
    2,90 €

    Reference: RFKONNECT-G12MM-81T613-2223

    12 mm fire-retardant heat-shrink tubing 1 metre

    12MM 1 Meter Heat Shrink Tube High Quality Flame Retardant Heat Shrink Tube 600V for Wire Connection and InsulationDescription:- Method of Use: Small diameter and short tubes can be shrunk using a

    2,90 €
  • 15 mm fireproof heat-shrink tubing 1 metre
    2,90 €

    Reference: RFKONNECT-G15MM-81T614-2224

    15 mm fireproof heat-shrink tubing 1 metre

    15MM 1 Meter Heat Shrink Tube High Quality Flame Retardant Heat Shrink Tube 600V for Wire Connection and InsulationDescription:- Method of Use: Small diameter and short tubes can be shrunk using a

    2,90 €
  • 20mm fire-retardant heat-shrink tubing
    2,90 €

    Reference: RFKONNECT-G20MM-81T615-2225

    20mm fire-retardant heat-shrink tubing

    20MM 1 Meter Heat Shrink Tube High Quality Flame Retardant Heat Shrink Tube 600V for Wire Connection and InsulationDescription:- Method of Use: Small diameter and short tubes can be shrunk using a

    2,90 €
  • 8 mm fire-retardant heat-shrink tubing 1 metre
    2,40 €

    Reference: RFKONNECT-G8MM-81T619-2227

    8 mm fire-retardant heat-shrink tubing 1 metre

    High quality 8MM x 1M heat shrink tube for connecting and insulating wires Heat shrink tubeSpecification:- Length: 1M- Diameter: 8mmIncluded in package:- 1 x Heat shrink tube

    2,40 €
  • POWERPOLE 30A red and black connector set
    2,40 €

    Reference: RFKONNECT-POWERPOLE-81T419-2209

    POWERPOLE 30A red and black connector set

    30A Red PCB Terminal and 30A Black PCB Terminal Pure Copper Terminal Connector for SMH AndersonDescription:- It is made of UL94V-0 Class A flame retardant material. The contact spring is made of

    2,40 €
  • 0 to 6GHz 2W 50-ohm dummy load with SMA male connector
    2,40 €

    Reference: RFKONNECT-CHARGE-81T414-2204

    0 to 6GHz 2W 50-ohm dummy load with SMA male connector

    Charge 0 - 6G 13mm SMA Load Terminal with Male Connector 2W 50ohm SMA - J Connector RF Radio AccessorySpecification :- Frequency : 0 - 6GHz- Size : 13mm (Height)- Power : 2WPackage Included :- 1 x SMA

    2,40 €
  • Black 4mm 32A banana plug
    1,50 €

    Reference: RFKONNECT-FICHEB-81T608-2218

    Black 4mm 32A banana plug

    Black pure copper banana plug 4mm 32A High current and high voltage Crossed banana connectorPackage contents:- 1 x black banana plug

    1,50 €
  • Red 4mm 32A banana plug
    1,50 €

    Reference: RFKONNECT-FICHEB--81T609-2219

    Red 4mm 32A banana plug

    4 mm pure copper red banana plug 32A High current and high voltage Transverse banana plugPackage contents:- 1 x red banana plug

    1,50 €
Showing 1 - 36 of 36 items

Delivery Europe & Overseas

Stock and shipped from France

Product return

14 days to return, 2 warranty

Email support

Response within 24h to 72h

Secure payment

SSL, VISA, Mastercard, Paypal

Copyright 2014-2024 - Passion Radio / 4 MY PEOPLE.