SDR transceivers There are 15 products.

• 

  Available

  PortaPack H1 for HackRF One by ShareBrained

  The PortaPack, developp by ShareBrained, is the perfect complement for the HackRF One, it adds a touch screen, navigation buttons, a headphone jack, a real-time clock and a micro SD card reader.Paired with an external USB battery and you are ready to explore the radio spectrum wherever you are, without the need for a computer. New: Integrates a TCXO 2.5PPM for the clock.The PortaPack firmware is available as well as the Havoc firmware which...

  The PortaPack, developp by ShareBrained, is the perfect complement for the HackRF One,...

  The PortaPack, developp by ShareBrained, is the perfect complement for the HackRF One, it adds a touch screen, navigation buttons, a headphone jack, a real-time clock and a...

  190,83 €
• 

  Available

  Raspberry Pi 3 B/B+ Quad Core 1.4Ghz WiFi...

  The new Raspberry Pi 3 model B & B+ features a 1.4Ghz Quad Core processor, WiFi 2.4Ghz / 5Ghz and Bluetooth Low Energy (BLE), making it even easier to develop RF and IoT radio applications. CPU Broadcom Quad Core BCM2837B0, Cortex-A53 64-bit 1.4GHz1 GB RAM memoryWi-Fi 802.11 b/g/n/ac Cypress CYW43455 (2.4 Ghz and 5Ghz)Bluetooth Low Energy 4.2GPIO 40-pin4 USB 2.0 portsStereo output (3.5mm jack) and composite video portHDMI FullHD Jack -...

  The new Raspberry Pi 3 model B & B+ features a 1.4Ghz Quad Core processor, WiFi...

  The new Raspberry Pi 3 model B & B+ features a 1.4Ghz Quad Core processor, WiFi 2.4Ghz / 5Ghz and Bluetooth Low Energy (BLE), making it even easier to develop RF and IoT...

  40,00 €
• 

  Available Online only

  Dongle Yard Stick One FSK ASK GFSK

  The Yard Stick One dongle (Yet Another Radio Dongle) can transmit and receive half-duplex digital radio signals on frequencies of 300-348 MHz, 391-464 MHz and 782-928 MHz, in modulations: ASK, OOK, GFSK, 2-FSK, 4-FSK and MSK. The YardStick One dongle uses the same radio circuit that popular IM-Me console with the ability to modify the firmware to create your own radio applications. The USB Stick Yard One comes with the RFCat firmware...

  The Yard Stick One dongle (Yet Another Radio Dongle) can transmit and receive...

  The Yard Stick One dongle (Yet Another Radio Dongle) can transmit and receive half-duplex digital radio signals on frequencies of 300-348 MHz, 391-464 MHz and 782-928 MHz, in...

  99,17 €
• 

  Available Online only

  Ubertooth One dongle bluetooth

  Bluetooth dongle open source 2.4 GHz come to use development platform and undertake trials in Bluetooth Class 1. The true power of Ubertooth One is the ability to write your own software to suit your needs. Ubertooth One can be used as Bluetooth spectrum analyzer in real time, sniffer Bluetooth (LAP sniffing and Kismet) packets. Come with : Ubertooth one usb stick (without case) and with antenna.

  Bluetooth dongle open source 2.4 GHz come to use development platform and undertake...

  Bluetooth dongle open source 2.4 GHz come to use development platform and undertake trials in Bluetooth Class 1. The true power of Ubertooth One is the ability to write your own...

  104,17 €
• 

  Available Online only

  HackRF One SDR Tranceiver

  The HackRF One is a SDR receiver-transmitter covering from 1MHz to 6GHz in all available modes, analog and digital.Tip: For use in the lab, or with strong signals nearby, the sensitivity of the device is sufficient. To use as receiver only we recommend the addition of an LNA preamplifier and an external antenna adapted to the frequency bands used. Or you may have a look at the SDRPlay RSP2 PRO receiver from 0.5 to 2Ghz.Optional: Aluminum Case,...

  The HackRF One is a SDR receiver-transmitter covering from 1MHz to 6GHz in all...

  The HackRF One is a SDR receiver-transmitter covering from 1MHz to 6GHz in all available modes, analog and digital.Tip: For use in the lab, or with strong signals nearby, the...

  257,50 €
• 

  Available

  LimeSDR RX & TX 0.1MHz - 3.8GHz Full-Duplex...

  The LimeSDR is an open-source SDR receiver and transmitter covering frequencies from 0.1MHz to 3.8GHz full-duplex with a bandwidth of 64Mhz, 2x2 Mimo. It can transmit and receive UMTS, LTE, GSM, LoRa, Bluetooth, Zigbee or RFID, to name but a few. RF Transceiver: Lime Microsystems LMS7002M MIMO FPRFFPGA: Altera Cyclone IVMemory: 256 MB DDR2 SDRAMUSB 3.0 controller (Type A)Continuous frequency range: 100 kHz - 3.8 GHzBandwidth: 61.44 MHzRF...

  The LimeSDR is an open-source SDR receiver and transmitter covering frequencies from...

  The LimeSDR is an open-source SDR receiver and transmitter covering frequencies from 0.1MHz to 3.8GHz full-duplex with a bandwidth of 64Mhz, 2x2 Mimo. It can transmit and...

  354,17 €
• 

  Available Online only

  BladeRF 2.0 micro TX/RX 47MHz to 6GHz 2×2 MIMO

  BladeRF 2.0 micro xA4/xA9 has a receive / transmit frequency in SDR from 47 MHz to 6 GHz, with a sampling frequency of 56 MHz (61.44 MHz maximum) and a 2×2 MIMO broadcast. Works with the libbladeRF library, the bladeRF 2.0 mini is compatible with GNURadio, GQRX, SDR-Radio, SDR#, gr-phosphor, SoapySDR, etc. under Windows, Linux and macOS. The xA4 features a 49KLE Intel Cyclone V FPGA including 38KLE freely programmable. The xA9 includes the...

  BladeRF 2.0 micro xA4/xA9 has a receive / transmit frequency in SDR from 47 MHz to 6...

  BladeRF 2.0 micro xA4/xA9 has a receive / transmit frequency in SDR from 47 MHz to 6 GHz, with a sampling frequency of 56 MHz (61.44 MHz maximum) and a 2×2 MIMO broadcast....

  665,83 €
• 

  Available Online only

  Transverter 60kHz to 300MHz Nuand XB 200

  Transverter 60kHz to 300MHz, LF/MF/HF/VHF, Nuand XB 200 for SDR BladeRF X40 and X115. Filtered frequency range down to 60kHz RX and TX filters for 50MHz-54MHz (6 meter band), 149MHz-159MHz band, and 206-235MHz bands High-Q, low-ESR passive components RF switch pass-through design Shielded, low-phase noise LO synthesizer 16 configurable GPIO pins (from C API and HDL)

  Transverter 60kHz to 300MHz, LF/MF/HF/VHF, Nuand XB 200 for SDR BladeRF X40 and X115....

  Transverter 60kHz to 300MHz, LF/MF/HF/VHF, Nuand XB 200 for SDR BladeRF X40 and X115. Filtered frequency range down to 60kHz RX and TX filters for 50MHz-54MHz (6 meter...

  312,50 €
• 

  Available

  MoRFeus Signal Generator + RF Converter from...

  MoRFeus is a broadband frequency generator and upconverter & downconverter from 30 MHz to 6 GHz. With LCD screen and front adjustment knob. MoRFeus is specifically designed to operate in 85 MHz to 5.4 GHz transmissions using these low-pass and high-pass filters. Delivered with: 1 MoRFeus with aluminum case and mounted LCD screen.

  MoRFeus is a broadband frequency generator and upconverter & downconverter from 30...

  MoRFeus is a broadband frequency generator and upconverter & downconverter from 30 MHz to 6 GHz. With LCD screen and front adjustment knob. MoRFeus is specifically designed...

  215,83 €
• 

  Available Online only

  BLADERF x115 RX & TX 300-3800 Mhz

  The x115 bladeRF from Nuand is a SDR transceiver full-duplex from 300 MHz to 3.8 GHz, all analog and digital modes, with appropriate software. 2 connectors antenna SMA female, Altera Cyclone IV FPGA. The BladeRF 115 can display up to 40 MHz of radio spectrum on the screen with a 12-bit sampling. Run on Linux with the open-source software GNUradio. Package includes: Board bladeRF x115 (115KLE Cyclone FPGA), USB 3.0 cable SS, 2 SMA cable....

  The x115 bladeRF from Nuand is a SDR transceiver full-duplex from 300 MHz to 3.8 GHz,...

  The x115 bladeRF from Nuand is a SDR transceiver full-duplex from 300 MHz to 3.8 GHz, all analog and digital modes, with appropriate software. 2 connectors antenna SMA female,...

  974,17 €
• 

  PandwaRF portable analyzer-copier-repeater...

  PandwaRF is a portable RF analyzer with battery and Bluetooth, it is a wireless transceiver for frequencies from 300 to 928Mhz and modulation modes ASK / OOK / MSK / 2-FSK / GFSK, in half-duplex mode.Operating principle of PandwaRF is to capture, display and then retransmit sequences of RF signals easily. It can be connected to an Android smartphone using Bluetooth mode (Low Energy BLE) or USB to connect to a PC or Linux.PandwaRF is based on...

  PandwaRF is a portable RF analyzer with battery and Bluetooth, it is a wireless...

  PandwaRF is a portable RF analyzer with battery and Bluetooth, it is a wireless transceiver for frequencies from 300 to 928Mhz and modulation modes ASK / OOK / MSK / 2-FSK /...

  90,83 €
• 

  Available

  USRP B200 MINI SDR TX & RX SDR 70Mhz to 6Ghz

  SDR Transceiver wide-band from 70 MHz to 6 GHz without gap and with 56 MHz of instantaneous bandwidth on the screen. The Ettus USRP B200 MINI operates in full duplex mode and is powered by USB 3.0 port. Compatible with open-source software GNU Radio (maintained by Ettus Research) and API UHD. New: Now include aluminium white case. Size: 50 x 84 mmTransmitter power: 10dBm Comes with: Board B200mini with case.

  SDR Transceiver wide-band from 70 MHz to 6 GHz without gap and with 56 MHz of...

  SDR Transceiver wide-band from 70 MHz to 6 GHz without gap and with 56 MHz of instantaneous bandwidth on the screen. The Ettus USRP B200 MINI operates in full duplex mode and...

  1 040,83 €
• 

  Available

  USRP B210 70Mhz to 6Ghz Full Duplex SDR MIMO (2...

  SDR Transceiver B210 wide-band from 70 MHz to 6 GHz without gap and with 56 MHz of instantaneous bandwidth on the screen, MIMO (2 Tx & 2 Rx). The Ettus USRP B210 operates in full duplex mode, MIMO (2 Tx & 2 Rx), and is powered by USB 3.0 port. Compatible with open-source software GNU Radio (maintained by Ettus Research) and API UHD. Transmitter power: 10dBm Comes with: Board Ettus B210, USB 3.0 câble.

  SDR Transceiver B210 wide-band from 70 MHz to 6 GHz without gap and with 56 MHz of...

  SDR Transceiver B210 wide-band from 70 MHz to 6 GHz without gap and with 56 MHz of instantaneous bandwidth on the screen, MIMO (2 Tx & 2 Rx). The Ettus USRP B210 operates...

  1 658,33 €
• 

  Available Online only

  BLADERF x40 RX & TX 300-3800 Mhz

  The bladeRF x40 from Nuand is a SDR transceiver full-duplex from 300 MHz to 3.8 GHz, all analog and digital modes, with appropriate software. 2 connectors antenna SMA female, Altera Cyclone IV FPGA. The BladeRF x40 can display up to 40 MHz of radio spectrum on the screen with a 12-bit sampling. Run on Linux with the open-source software GNUradio. Package includes: Board bladeRF x40 (40KLE Cyclone 4 FPGA), USB 3.0 cable SS, 2 SMA cable....

  The bladeRF x40 from Nuand is a SDR transceiver full-duplex from 300 MHz to 3.8 GHz,...

  The bladeRF x40 from Nuand is a SDR transceiver full-duplex from 300 MHz to 3.8 GHz, all analog and digital modes, with appropriate software. 2 connectors antenna SMA female,...

  624,17 €
• 

  Available

  LimeSDR mini RX & TX 10MHz - 3.5GHz Full-Duplex

  The LimeSDR is an open source SDR transceiver covering RF frequencies from 10 MHz to 3.5 GHz in full duplex , 1x1 mimo and 30.72 MHz bandwidth. RF Transmitter: Lime Microsystems LMS7002MFPGA: Altera MAX 10USB 3.012 bit Works with Windows GNU Radio, LimeSuite and HDSDR. On Linux with GNU radio. This material is intended for use in the laboratory or R&D. The LimeSDR is available without accessories, case, antenna (optional) or pack....

  The LimeSDR is an open source SDR transceiver covering RF frequencies from 10 MHz to...

  The LimeSDR is an open source SDR transceiver covering RF frequencies from 10 MHz to 3.5 GHz in full duplex , 1x1 mimo and 30.72 MHz bandwidth. RF Transmitter: Lime...

  190,83 €