Reference: DIAMOND-MCRMBNC-1036
Diamond MCRMBNC is a magnet base bracket for handheld transceivers and any devices with BNC connector. Coaxial cable: RG58 2.5m Connector: BNC Male / BNC FemaleMagnet diameter: 53mm
Reference: DIAMOND-MRX-141
Diamond MRX is a magnet base bracket for handheld transceivers and any devices with BNC connector. Coaxial cable: RG58 3m Connector: BNC Male / BNC FemaleMagnet diameter: 76.5mm
Reference: KOM-BK-600-BNC-1171
Flat magnetic base with a diameter of 6cm and to offset an antenna with a male BNC connector.Base connector : BNC femaleCoaxial cable connector : BNC maleHigh magnetic adhesion5m RG-58 coaxial cable
Reference: YAESU-CN-3-1296
Yaesu CN-3 adapter for SMA-M to BNC-F. Allows the use of antennas with BNC connector on Yaesu devices with SMA female connector. This adapter is compatible with Yaesu VX-6E, FT-70DE, FT-3DR, FT-2DR,
Reference: NAGOYA-RB16-BNC-1066
Nagoya RB-16 magnetic base with female BNC antenna support connector, with male BNC connector coaxial cable.For example, allows the BNC antenna of a walkie-talkie to be moved to the roof of a car to
Reference: NAGOYA-RB16SP-SMA-F-529
Magnetic mount Nagoya RB-16-SP with antenna support connector in SMA male, for walkie-talkie to deport the antenna of the handheld (for example in car or at home).Coaxial cable: RG174 50 Ohms 3 meters
Reference: ADAPT-DIAMOND-BNCPSMAJ-257
Adapter for walkie-talkie, handheld VHF-UHF or scanner equipped BNC to use SMA antennas.- The adapter has a BNC Male connector on one side and the other is SMA Female- The design is specially adapted
Reference: MESSI-CO-BNC-AC7M-S-1143
BNC-Male connector Messi & Paoloni to soldering for 7mm coaxial cable M&P ULTRAFLEX 7.New design with double seal to ensure perfect protection against water infiltration, control and
Reference: ADAPT-BNC-M-UHF-F-COUDE-1456
Right angle BNC Male to UHF Female (SO-239) connector adapter. Connector 1: BNC Male Connector 2: UHF Female (SO239)
Reference: PIGTAIL-SMA-M-BNC-F-83
SMA Male to BNC Female Adapter. RG 316 coaxial cable 50 ohms, about 15cm long.
Reference: CRT-CORDON-BNC-90CM-444
BNC-BNC cable 90 centimeters with 6mm RG58 coaxial cable 50 ohm and 2 BNC-Male connectors assembled.
Reference: MESSI-CO-BNC-AC5M-S-1160
BNC Male connector to soldering Messi & Paoloni, for AIRBORNE5 and RG58 5mm coaxial cable and 5.4mm HYPERFLEX5.New design with double seal to ensure perfect protection against water infiltration,
Reference: CORDON-RG58-BNC-30CM-1115
Coaxial cord cable with BNC Male - BNC Male connector with coaxial cable RG58 MIL-C-17 50 ohms for use in frequency from 0 to 1000Mhz.Available in different lengths: 30cm, 50cm, 1m or 2
Reference: CABLE-RG58-BNC-UHF-50CM-1117
Coaxial cable with BNC Male - UHF Male (PL-259) connector with coaxial cable RG58 MIL-C-17 50 ohms for use in frequency from 0 to 1000Mhz.Available in different lengths: 30cm, 50cm, 1m or 2
Reference: PIGTAIL-SMA-M-BNC-M-15CM-78
Coaxial cable with BNC Male - SMA Male connector with coaxial cable RG316 ohms for use in frequency from 0 to 3000Mhz.Available in different lengths: 15cm, 30cm or 50cmConnector 1: BNC MaleConnector
Reference: ADAPT-TNC-M-BNC-M-1463
RF adapter for TNC Male to BNC Male connector. Connector 1: TNC Male Connector 2: BNC Male Impedance 50 ohms
Reference: CABLE-RG58-BNC-SMA-50CM-1116
Coaxial cable with BNC Male - SMA Male connector with coaxial cable RG58 MIL-C-17 50 ohms for use in frequency from 0 to 1000Mhz.Available in different lengths: 30cm, 50cm, 1m or 2 metersConnector 1:
Reference: ADAPT-MUHF-M-BNC-F-843
RF adapteur Mini-UHF Male to BNC Female. Nickelplated, 50 ohms.
Reference: PIGTAIL-BNC-F-MCX-M-51
MCX Male to BNC Female Adapter. The MCX connector is compatible with the USB Dongle DVB-T RTL2832 +R820T & R820T2. Coaxial cable RG 316 50 ohms. Available in 15cm, 50cm or 1 meter length (to
Reference: ADAPT-BNC-M-BNC-F-426
RF adapter angled BNC Male to BNC Female.
Reference: ADAPT-BNC-M-UHF-F-73
Adaptateur BNC Male vers UHF Femelle. Pour talkie-walkie et portable VHF/UHF, scanner, munis d'une connectique BNC Femelle pour mettre une antenne.
Reference: ADAPT-BNC-F-UHF-F2-390
RF Adapter BNC Femelle to UHF Femelle (SO239).
Reference: PIGTAIL-JACK-BNC-F-1074
RF Pigtail mono-jack 3.5mm to BNC Female cable.Coaxial cable RG316 50 ohms 15cm long.
Reference: ADAPT-SMA-M-BNC-F2-275
RF adapter for walkie-talkie, handheld VHF-UHF or scanner, equipped with SMA female connector and to use a BNC male antenna. - The adapter is equipped with an SMA Male connector on one side and the
Reference: PIGTAIL-BNC-M-MCX-M-295
MCX Male to BNC Male Adapter. RG 316 coaxial cable 50 ohms, about 15cm long.
Reference: ADAPT-BNC-SMA-TALKIE-547
Adapter for walkie-talkie (handheld) BNC female <> SMA Female. Compatible with Baofeng, Wouxun and Anytone handhelds.
Reference: ADAPT-TNC-M-BNC-F-1462
RF adapter for TNC Male to BNC Female connector. Connector 1: TNC Male Connector 2: BNC Female Impedance 50 ohms
Reference: ADAPT-SMA-M-BNC-F-85
Adaptateur SMA Male vers BNC Femelle. Compatible avec la carte converter HF Ham It Up, HackRF et le récepteur SDR FUNcube Dongle Pro+.
Reference: ADAPT-BNC-F-SMA-F-55
Female BNC Adapter <> SMA Female.
Reference: ADAPT-BNC-F-F2-389
RF Adapter BNC Female <> BNC Female.
Reference: ADAPT-SMA-M-BNC-M-839
RF Adapter SMA Male to BNC Male.Frequency of use: From 0 to 3 GhzIn nickel and brass plated GOLDImpedance: 50 Ohms
Reference: ADAPT-BNC-CHARGE4-580
This connector is a male SMA terminator/termination endowed with a dummy load 50 Ohms for a maximum power of 1 watt on frequencies from 0 to 3Ghz. Connectors end 1: SMA maleConnectors end 2: Dummy
Reference: ADAPT-SOCLE-BNC-F-447
Pedestal and base BNC female welding, with 4 mounting holes.
Reference: ADAPT-F-M-BNC-F-733
RF adapteur F Male to BNC female. Nickelplated. The F connector is particularly used for satellite equipment.
Reference: ADAPT-DOUILLE-BNC-F-596
Socket base BNC female soldering.
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal