No products
Viewed products
-
Stay strap for...
Ultra-strong guy rope for Spiderbeam 12m...
New products
-
Anytone Q9 Bluetooth PTT headset for AT-D878 and AT-D578
54,63 € tax excl. -
Pack CB 27MHz PNI for car & 4x4 + STINGER 155cm magnetic antenna
99,17 € tax excl. -
Pack Passion SDR portable radio V5 with HF VHF UHF antenna
157,50 € tax excl. -
TinySA ULTRA Spectrum analyser & signal generator 100 Khz to 5.4 GHz
140,83 € tax excl.
-
Discreet CB antenna PNI Extra 45 cm 26-30MHz 150W magnetic base
11,97 € -5% 12,60 €
Stay strap for Spiderbeam 12m telescopic mast
No review at the momentUltra-strong guy rope for Spiderbeam 12m telescopic mast, with attachment points for 3 or 4 guy ropes, allowing 90° or 120° orientation and attachment of the guy ropes to ground stakes approximately 5 metres from the mast.
It's quick and easy to fit, and distributes forces evenly, protecting the mast from potential damage.
Ideally positioned at the bottom of the 8th segment of a mast, i.e. at a height of approximately 7 metres, for a diameter of 27mm to optimise the distribution of tension and improve the stability of the installation.
Supplied with: 1 Spiderbeam guy strap for 12m mast.
Data sheet
- Fully extracted length (height): 12m*.
- Transport length: 1.18m
- Weight: 3.3kg
- Bottom Diameter: 55m
- Minimum top diameter: 8mm*
- Wall thickness: 1.4mm - 2mm*
- Number of segments: 12
- Material: Black, UV protected fibreglass
- Specially reinforced multi-layer winding
* Due to production variations, the dimensions shown may vary slightly. This does not affect quality or performance.
Unlike the poles offered by most competitors, the top segment of the Spiderbeam is not a very thin and fragile whip. Instead, the mast can be used over its full 7m length, offering great flexibility and optimal height utilisation.
It uses a special reinforcement winding technique, where several layers of fibreglass are wound in an alternating direction (cross-wound), which considerably increases their lateral and linear strength.
The joints between the individual tube segments are also strengthened by a larger than usual overlap.
Unlike other poles where the top segment is very thin like a whip, the top segment of the Spiderbeam Heavy Duty poles has a diameter of 8mm (and a wall thickness of 1.4mm), which allows them to be used over their entire 12m length.
Additional or similar equipment
Spiderbeam telescopic mast 12m fiberglass
The Spiderbeam Heavy Duty 12m fibreglass mast is the right choice for using a wide variety of 40/80/160m long wire and GP or inverted L antennas, lightweight 1-element Quad or Delta loops for 20-10m,
104,17 € tax incl.In stock104,17 €tax excl.
Mastrant-P2 guy rope 1.6mm 100 Kg strength
MASTRANT-P2 is a 1.6mm rope with a strength of 100 daN / kg, specially designed for guy ropes, offering an excellent price-performance ratio. This high quality rope has outstanding strength, low
14,13 € tax incl.In stock14,13 €tax excl.
14,88 € -5%
Core nut for steel rope and guy rope from 3 to 10 mm
The core lug protects the guy at the end against premature wear, fraying and is indispensable for guying. Made of A4 stainless steel (AISI 316) to prevent rusting. Also suitable for steel guy wire.
0,28 € tax incl.In stock0,28 €tax excl.
0,29 € -5%
Mastrant-P3 guy rope 2.6mm Resistance 200 kg colour blue
MASTRANT-P3 is a 2.6mm rope with a strength of 200 daN/kg, specially designed for guy ropes, offering an excellent price-performance ratio. This high quality rope has outstanding strength, low
20,42 € tax incl.In stock20,42 €tax excl.
21,49 € -5%
Mastrant-P3 guy rope 3.5mm Strength 300 kg
MASTRANT-P3+ is a 1.6mm rope with a strength of 300 daN/kg. This high quality rope has outstanding strength, low stretch, excellent UV and moisture resistance. It is lightweight, extremely abrasion
27,48 € tax incl.In stock27,48 €tax excl.
28,93 € -5%
Mastrant-P4 guy rope 4.4mm Strength 440 kg colour blue
MASTRANT-P4 is a 4.4mm rope with a strength of 440 daN/kg and is available in neon blue and black. This high quality rope has outstanding strength, low stretch, excellent UV and moisture resistance.
32,97 € tax incl.In stock32,97 €tax excl.
34,71 € -5%
Stainless steel cable clamp for 3 to 10 mm guy wires
Stainless steel cable clamp for guy wires, easy to install thanks to the long threaded section. For optimal hold, we recommend using 3 cable ties and a heart-shaped lug per fixing point.
1,35 € tax incl.In stock1,35 €tax excl.
1,42 € -5%
5-8 mm spring hook carabiner for guy rope
Single stainless steel carabiner for attaching a steel guy rope or a guy rope.Strength: 400 daN, ~kg Working load 120 daN, ~kg From 5mm to 8mm
1,18 € tax incl.In stock1,18 €tax excl.
1,24 € -5%
Tensioner for guy rope with hook and eyelet diameter 10 to 16 mm
Tensioner for guy wires with hook and eye (diameter from 10 to 16 mm) in stainless steel for easy assembly.Strength: 1100 daN, ~kg Working load 80 daN, ~kg
3,06 € tax incl.In stock3,06 €tax excl.
3,23 € -5%
Robust 18m telescopic Spiderbeam mast for HF VHF UHF and wire antennas
The Spiderbeam Heavy Duty 18m fibreglass mast is a good choice for using a wide variety of 40/80/160m long-wire and GP or inverted L antennas, lightweight 1-element Quad or Delta loops for 20-10m, as
226,67 € tax incl.In stock226,67 €tax excl.
Guy straps for Spiderbeam 18m telescopic mast (set of 2)
Ultra-strong guy straps for Spiderbeam 18m telescopic masts, with attachment points for 3 or 4 guy wires, allowing 90° or 120° orientation and attachment of the guy wires to ground stakes
22,61 € tax incl.In stock22,61 €tax excl.
Reviews
Delivery Europe & Overseas
Stock and shipped from France
Product return
14 days to return, 2 warranty
Email support
Response within 24h to 72h
Secure payment
SSL, VISA, Mastercard, Paypal