No products
New products
-
RTL-SDR V3 USB-C TCXO + SMA + Bias-T dongle with R860 tuner
51,25 € tax excl. -
-
-
868 MHz F4NLV SAW filter for Meshtastic Meshcore LoRa u.FL IPEX
18,90 € tax excl.
Viewed products
-
Seeed Studio Wio...
The Wio Tracker L2 Pro from Seeed Studio is a...
-
Mobile QYT KT-8900D...
The QYT KT-8900D covers RX and TX 144-146MHz...
View larger 
Seeed Studio Wio Tracker L2 Pro Meshtastic LoRa 868 MHz 3.2" Touchscreen GNSS Wi-Fi BLE
No review at the momentThe Wio Tracker L2 Pro from Seeed Studio is a standalone, decentralised mesh communication device running on Meshtastic. Equipped with a 3.2-inch colour touchscreen and an ESP32-S3 (Wio-S3) chip, it allows users to send messages, share GPS coordinates and view offline maps without relying on a mobile network or a smartphone.
- Standalone operation with a large 3.2-inch colour touchscreen
- Long-range LoRa connectivity on the 863–928 MHz band (868 MHz Europe compatible)
- Integrated GNSS module for geolocation and offline map support
- Comprehensive wireless connectivity: 2.4 GHz Wi-Fi and Bluetooth Low Energy (BLE)
- Open-source platform powered by the Wio-S3 (ESP32-S3) module
- Ideal for hiking, emergency situations and IoT mesh networks
Includes: 1x Wio Tracker L2 Pro for Meshtastic, 1x LoRa antenna, 1x quick start guide.
Data sheet
The Seeed Studio Wio Tracker L2 Pro is an all-in-one portable device designed for the open-source Meshtastic protocol. Aimed at amateur radio operators, outdoor enthusiasts and emergency response personnel, it offers a resilient means of communication that is independent of traditional telecoms networks. Thanks to its large touchscreen and built-in GPS, you can communicate and navigate independently whilst out in the field.
Key features
- Standalone touchscreen interface: The 3.2-inch colour touchscreen allows you to read and write messages and view maps directly on the device without needing a smartphone.
- Offline map support: View the positions of members of your mesh network directly on the built-in base map, even in areas with no mobile coverage.
- Precise GNSS geolocation: Integrated high-sensitivity GPS/GNSS module for instant sharing of your coordinates and distress beacons.
- Ultra-versatile Wio-S3 core: Architecture based on the ESP32-S3, combining computing power, Wi-Fi and BLE connectivity, and ease of open-source programming.
- Universal LoRa band (863–928 MHz): Complies with European (868 MHz) and international (915 MHz) regulations, ideal for local and long-range mesh networking.
Technical specifications
- Main module: Seeed Studio Wio-S3 (Espressif ESP32-S3 dual-core SoC)
- Supported LoRa frequencies: 863 MHz to 928 MHz (suitable for 868 MHz in the EU and 915 MHz in the US)
- Display: 3.2-inch colour LCD touchscreen
- Positioning: Built-in multi-constellation GNSS receiver
- Wireless connectivity: Wi-Fi 802.11 b/g/n (2.4 GHz), Bluetooth 5 (LE), LoRa
- System / Firmware: Pre-configured / Meshtastic-compatible
- Software features: Decentralised messaging, offline mapping, mesh node relay, telemetry
- Interface and charging: USB Type-C port
Compatibility
- Software ecosystem: Official Meshtastic firmware (iOS, Android, Web Client)
- LoRa networks: All 868 MHz and 915 MHz LoRa mesh nodes (Heltec, LilyGO T-Beam, RAKwireless, etc.)
- Communication protocols: LoRa Mesh, Wi-Fi Station/AP, Bluetooth Low Energy
FAQ
Do you need a smartphone to use the Wio Tracker L2 Pro?
No, this is one of the Pro version’s key advantages: its 3.2-inch touchscreen allows you to enter text, read messages and track your location via GPS without needing a Bluetooth connection to a smartphone.
Is this device compatible with the 868 MHz frequency used in France and Europe?
Yes, the LoRa chip covers the entire 863 to 928 MHz range, making it fully operational on the 868 MHz band authorised in Europe for Meshtastic.
How do the offline maps work?
Map data is stored locally on the device, allowing you to view your GNSS position as well as that of other nodes in the group without any internet connection.
Can it be used as a simple relay (router node)?
Yes, the Wio Tracker L2 Pro can be configured as a client, router or repeater within the Meshtastic mesh network topology to extend your group’s coverage.
Can the firmware be updated easily?
Absolutely; updates can be carried out via the USB-C port using the official Meshtastic web flasher or the ESP32 development tools.
Customers also bought
No products available
Reviews
Additional or similar equipment
LoRa Tracker module 433 or 868 MHz Paxcounter BLE WIFI LoRaWan
This LoRa tracker is an IoT development board for LoRa 433 Mhz or 868 Mhz frequencies (depending on the model), with LoRaWAN enabled and WIFI 802.11 b/g/n connection , Bluetooth/BLE, 2.4cm OLED
18,24 € tax incl.Material no longer available15,20 €tax excl.
36,48 € -50%TTGO T-BEAM V1.0 LoRa GPS Tracker 433 / 868 Mhz Bluetooth WIFI
This TTGO T BEAM V1.0 LoRa tracker is an IoT development board for LoRa 433 Mhz or 868 Mhz frequencies (depending on the model), with 802.11 b/g/n WIFI connection , Bluetooth/BLE, 2.4cm OLED screen
33,53 € tax incl.Out of stock, available within 1 month27,94 €tax excl.
47,90 € -30%
TTGO T-BEAM V1.2 Meshtastic LoRa 868 MHz Card SX1276 ESP32 WiFi BT GPS
IoT development board for the LoRa 868 MHz ISM band, with 802.11 b/g/n WIFI connection , Bluetooth/BLE 4.2, soldered 2.4cm OLED display, GPS module and battery holder (battery not included). With
59,52 € tax incl.Out of stock, available within 1 month49,60 €tax excl.
TTGO T-BEAM SUPREME SX1262 Meshtastic 868 MHz Lora WiFi BT5 GPS
Evolution of the T-BEAM SUPREME board with Meshtastic firmware installed, IoT development board for the LoRa 868 MHz ISM band, with 802.11 b/g/n WIFI connection , Bluetooth/BLE 5, 2.4cm soldered OLED
69,52 € tax incl.Out of stock, available within 1 month57,93 €tax excl.
LILYGO T-Deck Plus SX1262 LoRa 868MHz Meshtastic Terminal with Keyboard
All-in-one handheld terminal with colour screen, QWERTY keyboard and LoRa SX1262 868MHz module. Complete solution for mesh communications and IoT applications.2.8-inch TFT colour screen Integrated
99,57 € tax incl.Out of stock, available within 1 month82,98 €tax excl.
ThinkNode M5 LoRa Meshtastic ESP32-S3 GPS 868 MHz Transceiver by Elecrow
The ThinkNode M5 is a high-performance LoRa communication terminal designed for the decentralized Meshtastic network. Equipped with an ESP32-S3 processor and an e-ink display, it allows users to
63,06 € tax incl.Out of stock, available within 1 month52,55 €tax excl.
ThinkNode-M3 Meshtastic GPS WiFi BLE 868 MHz Tracker (Elecrow)
The ThinkNode-M3 is a compact, high-performance tracker designed for the Meshtastic ecosystem, enabling precise geolocation and off-network communication. Thanks to the integration of LoRa, GNSS,
47,57 € tax incl.Out of stock, available within 1 month39,65 €tax excl.
52,86 € -10%SenseCAP T1000-E GPS Tracker with LoRa, Meshtastic and Bluetooth, nRF52840, Seee
The SenseCAP T1000-E from Seeed Studio is a credit-card-sized GPS tracker withMeshtastic firmwarepre-installed, which is also compatible with Meshcore. It enables off-grid communication, location
49,00 € tax incl.Out of stock, available in 1 month’s time40,83 €tax excl.
Wio Tracker L1 Pro Meshtastic LoRa 868 MHz nRF52840 GPS OLED Seeed Studio Node
The Wio Tracker L1 Pro from Seeed Studio is a fully-fledged standalone device designed for Meshtastic decentralised mesh networks. It combines a Nordic nRF52840 ultra-low-power processor, an 868 MHz
55,52 € tax incl.Out of stock, available in 1 month’s time46,27 €tax excl.
SenseCAP MeshTracker X1 GPS Tracker Meshtastic Meshcore LoRa 868MHz BLE IP66 See
The SenseCAP MeshTracker X1 from Seeed Studio is a standalone, credit-card-sized GPS tracker designed for decentralised mesh networks such as Meshtastic or Meshcore. Ideal for outdoor activities,
60,26 € tax incl.Out of stock, available in 1 month’s time50,22 €tax excl.
Heltec Mesh Node T114 Rev. 2.0 – nRF52840 SX1262 LoRa and Bluetooth module, Mesh
The Heltec Mesh Node T114 (Rev. 2.0) is an ultra-low-power LoRa development board based on the Nordic nRF52840 microcontroller and the Semtech SX1262 transceiver. Designed specifically for Meshtastic
49,62 € tax incl.In stock41,35 €tax excl.
LILYGO T-Lora Pager ESP32-S3 LoRa SX1262 Module 2.33" IPS Display NFC GNSS AIoT
The LILYGO T-Lora Pager is a standalone, programmable device in pager format, combining a powerful ESP32-S3 microcontroller with an SX1262 long-range LoRa radio transceiver. Designed for makers,
127,97 € tax incl.In stock106,64 €tax excl.
See more equipment
Europe & Overseas
Shipped from France
Product return
14 days to return, 2 warranty
Email support
Response within 24h to 72h
Secure payment
SSL, VISA, Mastercard, Paypal
Copyright 2014-2026 - Passion Radio / 4 MY PEOPLE
Les photos et coloris ne sont pas contractuels.