The Signalink SLCAB5PD radio interface cable...
The Signalink SLCAB5PD radio interface cable can be used with the Signalink USB sound card and with virtually all Yaesu and Ten-Tec radios that have a 5-pin mini-DIN data port (DATA socket). This includes, but is not limited to, the radios listed below.
The jumper module compatible with this cable bears the reference: SLMOD5PD .
If in doubt, check the guide below by searching the PDF download document to find the correct cable and jumper module reference for your radio.
Supplied with: 1 Signalink SLCAB-5PD cable.
Guide in French to choose the right radio cable and jumper according to the brand and model of the radio used. 177.6k
Guide in English to choose the right radio cable and jumper according to the brand and model of the radio used. 666.13k
FTDX-5000 / D / MP
FTDX-9000 / D / MP
Argonaut VI **
Orion II **
These radio's use our 8-pin DIN radio cable (p / n SLCAB8PD), but the jumper settings required are the same as those used by the 5-pin DIN cable
The Yaesu SCU-17 interface is a CAT control system that allows you to control a Yaesu transceiver from a computer and to be able to practice digital communication modes, also called digimodes such as
124,17 €tax excl.
The Signalink SLMOD5PD Jumper module is compatible for use with the Signalink USB sound card and with Ten-Tec and Yaesu radios which have a 5 pin mini-DIN data port (DATA socket). The radio cable
10,75 €tax excl.
The Signalink SLCAB8PD radio interface cable can be used with the Signalink USB sound card and with practically all ICOM, Ten-Tec radios which have an 8-pin mini-DIN data port (DATA socket). This
29,08 €tax excl.
Be the first to ask a question about this product!
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal