The Yaesu SCU-17 interface is a CAT control system that allows you to control a Yaesu transceiver from a computer and to be able to practice digital communication modes, also called digimodes such as SSTV, RTTY, PSK, ROS, FT8, FT4, etc.
The SCU-17 module works as a sound card, only one USB cable is needed between the interface and the computer to supply power and recover RX and TX audio.
Front panel LEDs allow monitoring of PTT, FSK, and adjustment of RX and TX audio input levels directly from the front panel interface.
The drivers and virtual COM port driver for Windows can be downloaded below and installed BEFORE connecting the USB cable.
Supplied with: 1 Yaesu CAT SCU-17 interface, 1 USB A / B cable, 1 6-pin Mini-Din cable (MDIN6P), 1 9-pin RS232 DB9 serial cable, 2 3.5mm Jak stereo connectors, English manual.
Power supply: DC 5V +/-5% (by USB cable included)
CAT interface socket: RS232C and USB (1.1 or USB 2.0)
Case Size: 111 x 25.4 x 74.0mm
2 years warranty
This Yaesu CAT interface is delivered ready to use, with cables, for the Yaesu FT-DX1200, FT-950, FT-450D transceivers.
For the FT-818ND, FT-817ND, FT-857D and FT-897D, the optional CT-62 cable is required.
For FTDX5000MP, FT-1000MP or similar, the optional SCU-21 cable is required.
For the FTDX9000D/MP, the SCU-22 cable is required.
The FT-991A or FT-DX3000 do not need a CAT interface, as they integrate it with CAT control functions, audio input / output, with a single USB Male A / Male B cable.
Telescopic and multi-band antenna 7-430 MHz Diamond Antenna RHM10 for mobile. Adjustable sliding tube at the base. Bands: 7 to 430MHzMax Power Rating: 130w (SSB)Height: 50cm (retracted) 1.77m
The HRI-200 module for C4FM and Yaesu Fusion system connects to the Internet a transceiver as FTM-400 or DR-1XE repeater enable WIRES-X service. The connection between the HRI-200 and the computer is
The Yaesu FT-991A is the latest revised version, with color waterfall, multi-band and multi-mode display : Analogue HF, 50, 144 and 430 Mhz and Digital C4FM (Yaesu Fusion System), with integrated
The new FT-891 is the most compact HF 100W transceiver in the Yaesu range, suitable for both fixed and mobile applications.It covers all HF amateur bands from 160 to 10m with also 6m band (50 MHz)
Automatic antenna tuner Yaesu FC-40 for transceivers FT-450, FT-857, FT-897 and FT-897D, FT-857D and FT-450D.The FC-40 automatic tuner is designed to be placed outdoors on the antenna mat, works with
This Yaesu FC-50 automatic antenna tuner is specially designed for the FT-891 and for indoors, deskop or mobile used.The FC-50 automatic tuner antenna operates from 1.8-29Mhz and 50-54 MHz with a
The transceiver Yaesu FT-450D is the improved version of the famous Yaesu FT-450AT. It covers all HF radio bands from 160m to 10m as well as the 6m band (50 MHz) with a power of 100W in SSB.Reception
The new Yaesu FT-818 ND is the replacement of the famous QRP FT-817 ND from Yaesu. Compared to the FT-817, the FT-818 is equipped with a TCXO-9 and offers 6W on 13.8V and 2.5W power supply on built-in
USB programming SCU39 kit for the Yaesu FT2D and FT3D walkie-talkie (all versions: FT2DE, FT2DR, FT3DE, FT3DR).This Yaesu SCU39 connection kit also allows the user of an FT-3D or FT-2D, to have a
Wideband transmit-receive antenna from 7 to 30Mhz with the 6m (50Mhz) band Komunica BAZOKA-PRO for use in mobile and portable.The Bazoka Pro antenna is preset from the factory for the amateur radio
The Xiegu G90 is a 20W portable HF amateur radio transceiver with a 24-bit SDR architecture, a built-in automatic antenna tuner, detachable display, 3cm (1.8 inch) high-brightness color TFT LCD
The Xiegu CE-19 extension port makes it easy to connect a PC or other terminals and modems to use the digital modes SSTV, RTTY, ROS, PSK31, FT8, FT4, etc.The card allows you to extend the MINI-DIN8
Yaesu CT-62 CAT interface cable compatible with FT-818ND station.
Yaesu SCU-28 linear amplifier connection cable, 10-pin mini-DIN connectors to bare wires, compatible with Yaesu FT-450D, FT-950, FTDX-1200 station.
Yaesu SCU-LAN10 unit for remote operation with FTDX101 and FTDX10 series. Requires the following firmware or higher (FTDX101 series): - MAIN: V01-14 - DISPLAY: V01-06 - IF DSP: V01-05 - SDR: V02-03
Be the first to ask a question about this product!
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal