No products
New products
-
Nissei TX-101A HF 1.6-60 MHz 2kW SWR power meter with PEP measurement
149,00 € tax excl. -
Nissei TX-502 Tos-meter Wattmeter Cross-Needle 1.6-525 MHz 200W
159,00 € tax excl. -
Nissei RX-503 HF/VHF/UHF 1.8-525 MHz 200W Power Meter with crossed needles
139,00 € tax excl. -
Nissei RS-70MAX RF Digital Power Meter 1.6-60 MHz 200W
109,00 € tax excl.
Viewed products
-
JCase705 – Waterproof...
The JCase705 from Chelegance (CNtoU) is a...
-
Micro-earphone compatible with YAESU / MIDLAND ALAN42 / MAXON 2 pin
10,32 € -20% 12,90 €
View larger 
JCase705 – Waterproof carrying case for Icom IC-705 POTA/SOTA Chelegance
No review at the momentThe JCase705 from Chelegance (CNtoU) is a rugged protective case specifically designed for the Icom IC-705 transceiver. Ideal for outdoor operations such as POTA (Parks on the Air) or SOTA (Summits on the Air), it integrates the radio into a secure metal chassis while providing water and dust resistance. Its design allows the radio to be used directly inside the case with an optimal viewing angle and offers storage space under the panel for accessories.
- Full waterproof and dustproof protection
- Dedicated metal panel for perfect IC-705 integration
- Lower storage space for mic, cables and antennas
- Rugged pressure-resistant design
- Ergonomic operating angle for the touchscreen
- Cable pass-throughs provided for antennas and power
- Solid carrying handle for maximum mobility
Supplied with: 1 JCase705 case, 1 specialized metal panel for IC-705, 1 screw kit, 2 anti-vibration foam pads.
Data sheet
Summary
The JCase705 is the ultimate solution for nomadic radio amateurs wishing to protect their precious Icom IC-705 during expeditions. Designed by Chelegance under the CNtoU brand, this case transforms your portable transceiver into a rugged, waterproof, and ready-to-use field station. It is particularly aimed at POTA and SOTA activation enthusiasts who need reliability and speed of setup in the field.
Key Features
- Military-Grade Protection: Waterproof and dustproof design, shock and pressure resistant, ensuring the safety of the radio in harsh environments.
- 'Go-Box' Integration: The IC-705 attaches to an internal metal panel, transforming the case into a complete station ready to transmit as soon as it's opened.
- Cable Management: Features expansion slots and smart cable pass-throughs to connect antennas, power supplies and microphones without compromising organization.
- Smart Storage Space: A compartment located under the radio allows for storing the hand mic, coaxial cables or a small external battery.
- Field Ergonomics: The chassis holds the radio at an ideal angle for screen reading and control usage, even when placed on the ground or a camping table.
Technical Specifications
- Model: JCase705 (CNtoU)
- Compatibility: Specific for Icom IC-705
- Materials: High-density ABS plastic (case), Metal (mounting panel)
- External dimensions: 274 x 227 x 155 mm
- Internal dimensions: 239 x 173 x 141 mm
- Weight: 1.85 kg (empty)
- Waterproofing: Waterproof and Dustproof design (when closed)
- Mounting system: Screw mounting on the radio chassis (replacing original screws)
- Damping: Includes double-sided foam pads to reduce vibrations
Compatibility
- Transceiver: Icom IC-705 (perfect fit)
- Accessories: Icom HM-243 hand microphone (fits in the lower compartment)
- Connectivity: Compatible with most standard coaxial cables and PL-259/BNC connectors passing through the provided openings.
FAQ
Is the case waterproof when the lid is open for use?
No, waterproofing is only guaranteed when the case is closed and locked during transport. Once opened to operate the radio, the unit is exposed to the elements, although the metal panel offers protection against light splashes on the sides.
Can the BP-272 or BP-307 battery be left on the radio inside the case?
Yes, the internal space is designed to accommodate the IC-705 with its standard battery mounted on the back. The space under the panel also allows for storing additional batteries.
Is installing the radio difficult?
Installation is simple but requires a screwdriver. You must remove the original side screws from the IC-705 to fix the radio onto the JCase705 metal cradle. The provided manual details this procedure step-by-step.
Is there room for an automatic tuner like the mAT-705?
The space under the radio panel is intended for accessories. Depending on the size of the tuner and cable organization, it is possible to fit small accessories, but it is recommended to check the dimensions of the lower compartment (approximately the size of the bottom of the case minus the thickness of the radio).
Does the case float?
While not certified as a flotation device, the waterproof design and trapped air volume generally allow this type of case to float briefly if it falls into the water closed, thus protecting the equipment during recovery.
Why choose the JCase705?
- Turnkey solution: No more need to DIY a generic case with cut foam, everything is pre-machined for the IC-705.
- Proven robustness: Chelegance is recognized for the quality of its amateur radio accessories, offering superior durability compared to 'DIY' solutions.
- Space optimization: Unlike pre-cut foams that waste volume, panel mounting frees up valuable space for accessories.
- Professional Look: Offers a neat aesthetic and a 'Pro' finish to your portable station, ideal for demonstrations or public operations.
- Passion Radio Availability: By buying from us, you benefit from stock in Europe, fast delivery and technical support.
Comparison
| Model | Key feature | Price | Key features |
|---|---|---|---|
| JCase705 – Waterproof carrying case for Icom IC-705 | Integrated metal chassis and IP67 protection | Check | Rugged protection, fixed radio integration, ideal for rapid POTA/SOTA deployment. |
| Chelegance XPG magnetic antenna | VHF/UHF (136-150 / 400-470 MHz) | 20.75€ | Ultra-compact, 5.5cm magnetic base, 80W power handling. |
| JPC-12 GP HF portable antenna | HF 7-50 MHz (40m to 6m) | 157.5€ | 5-minute installation, backpack format, complete Ground Plane antenna. |
| MC-750 HF portable antenna | HF 7-50 MHz (100W PEP) | 195.5€ | Complete kit with 7MHz coil, increased versatility, supports 100W. |
| Conclusion: While antennas complete your station, the JCase705 is the priority investment to secure your Icom IC-705 and ensure its longevity during your outdoor expeditions. | |||
Customers also bought
8,90 €Reference: RFKONNECT-ANTENNA-ADSB-308
1090 MHz PCB passive ADS-B antenna for SDR reception
Passive omnidirectional PCB antenna for ADS-B reception on 1090 MHz, operates on RX from 1060 to 1120 MHz. The antenna is supplied with a female SMA connector soldered to the PCB. Optional: SMA
8,90 €
9,77 €Reference: NAGOYA-AT805-MALE-409
Mini-Antenna NA-805 5cm SMA Male or Female 144/430/1200MHz
Rigid mini-antenna for 144/430/1200MHz, 5cm long with 0dbi gain, SMA male or female connector, suitable for DV Mega, BlueDV pack, DV4mini and all VHF-UHF walkie-talkies with SMA.Frequencies: VHF
9,77 €
3,50 €Reference: VENTION-BBOBY-AUDIO-617
Audio combiner cable 2x Jack 3.5mm Stereo Vention
This audio cable with ferrite Vention allows to combine 2 Jack 3.5mm female jacks (microphone and audio) in 1 audio jack SMA male 3.5mm.It allows for example to connect a smartphone headset on the
3,50 €
4,50 €Reference: ADAPT-F-F-SMA-F-728
Adapter F Female SMA Female
This RF adapter converts an F female connector to an SMA female connector. The F connector is particularly used for satellite equipment.
4,50 €
We also recommend
No products available
Reviews
Europe & Overseas
Shipped from France
Product return
14 days to return, 2 warranty
Email support
Response within 24h to 72h
Secure payment
SSL, VISA, Mastercard, Paypal
Copyright 2014-2026 - Passion Radio / 4 MY PEOPLE
Les photos et coloris ne sont pas contractuels.