



Viewed products
Antenna support in L format. The antenna can be...
View larger SIRIO-M2-2805
New product
Italy
SIRIO antenne, Via Liguria, 15, 46049 Volta Mantovana (MN), Italy, Tel.: +39 0376 801515, email : info@sirioantenne.it
No review at the momentAntenna support in L format. The antenna can be fixed on both sides. Allows two positions. Compatible with nautical and land installations. Made of stainless steel.
Reference: CABLE-COAXIAL-NM-SMAM-1M-1449
N Male - SMA Male coaxial cable with KSR195 low-loss 50 ohm coaxial cable for use from 0 to 6 GHz. Lengths available: 1, 2, 5, 10, 15 or 20 metresConnector 1: N MaleConnector 2: SMA Male
Reference: NAGOYA-NA771A-SMAM-560
The Nagoya antenna NA-771A for walkie-talkie on the VHF Aviation band, it works in reception and transmissionfrom 118 to 136MHz.Frequencies: 118-136MHz Length: 39cm SWR: Less than 1.5: 1 Impedance:
Reference: SIRIO-SUPPORT-M1-657
Stainless steel mounting bracket SIRIO M-1. Allows the installation of mobile or portable antenna. Size: 3,8 x 6,4 x 9,9 cm. Delivered with: 1 bracket only SIRIO M-1, without base or coaxial cable
Reference: RALLONGE-COAXIAL-RP-SMAM-NF-1504
Coaxial cable type extension, low loss KSR-400, with RP-SMA Male to N Female connector for use from 0 to 6Ghz. The KSR400 coaxial is equivalent to the LMR-400 in terms of performance and losses.
13,50 €
Reference: DIAMOND-K33-133
Diamond K33 tilt angle adjustable mount bracket for heavy duty type. Coaxial cable with SO-239 socket (UHF female) compatible: Diamond RG3MR or RG6MR, SO-239 Nagoya socket cable.
Reference: SIRIO-SUPPORT-M1-657
Stainless steel mounting bracket SIRIO M-1. Allows the installation of mobile or portable antenna. Size: 3,8 x 6,4 x 9,9 cm. Delivered with: 1 bracket only SIRIO M-1, without base or coaxial cable
Reference: DIAMOND-KLR-939
Diamond KLR mounting bracket for attaching to a car gallery the mount for the Diamond K9000 motorized moving antenna.
Reference: SIRIO-FT4-2802
Antenna bracket angled at 90º for wall mounting. Tube section 38 mm in diameter. It has two 9 mm diameter holes for two lag bolts. There is a third hole in the lower part of the tube to accommodate
Click here to leave a review
Be the first to ask a question about this product!
Diamond K33 tilt angle adjustable mount bracket for heavy duty type. Coaxial cable with SO-239 socket (UHF female) compatible: Diamond RG3MR or RG6MR, SO-239 Nagoya socket cable.
49,17 €tax excl.
Stainless steel mounting bracket SIRIO M-1. Allows the installation of mobile or portable antenna. Size: 3,8 x 6,4 x 9,9 cm. Delivered with: 1 bracket only SIRIO M-1, without base or coaxial cable
8,25 €tax excl.
Diamond KLR mounting bracket for attaching to a car gallery the mount for the Diamond K9000 motorized moving antenna.
27,43 €tax excl.
Antenna bracket angled at 90º for wall mounting. Tube section 38 mm in diameter. It has two 9 mm diameter holes for two lag bolts. There is a third hole in the lower part of the tube to accommodate
15,19 €tax excl.
Basic antenna support. Made of high-quality aluminium with stainless steel screws and clamps. Compatible with SPO, GPF and similar antennas. For masts from 25 to 55 mm in diameter. Consists of two
9,61 €tax excl.
M-3 base antenna support. Double position. Compatible with masts 35 to 42 mm in diameter. Includes brackets and screws. Can also be wall-mounted using 2 screw anchors (not included). Made of 3 mm Ø
50,19 €tax excl.
66,92 € -10%Female PL socket (SO239) usable up to 500 MHz. No coaxial cable required.
7,50 €tax excl.
Shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal
Copyright 2014-2025 - Passion Radio / 4 MY PEOPLE.
Les photos et coloris ne sont pas contractuels.