The Signalink SLMOD8PD Jumper module is compatible for use with the Signalink USB sound card and with virtually all ICOM radios which have an 8-pin mini-DIN data port (DATA socket).
This module is intended for ICOM radios only. It cannot be used with other brands of radio (Ten-Tec, etc.) even if they use the same type of connector.
The radio cable compatible with this jumper module has the reference: SLUSB8PD .
In case of doubt, you can check using the guide to download in PDF below, the correct reference of radio cable and jumper module (jumper) for your set.
Supplied with: 1 Signalink SLMOD-8PD Jumper module.
Guide in French to choose the right radio cable and jumper according to the brand and model of the radio used. 177.6k
Guide in English to choose the right radio cable and jumper according to the brand and model of the radio used. 666.13k
IC-575A / H
IC-735, IC-736, IC-737, IC-738
IC-756 / 756PRO
IC-7600, IC-7700, IC-7800
** This socket only supports HF operation. If you want to operate both HF and VHF, then you will need to use the 6-pin mini-DIN data port instead (IC-746PRO model only).
The Signalink USB radio interface from Tigertronics is a USB sound card that allows you to receive and transmit from a computer to practice digital modes such as SSTV, RTTY, Packet, PSK, ROS, FT8,
The Signalink SLUSB8PD radio interface cable can be used with the Signalink USB sound card and with practically all ICOM, Ten-Tec radios which have an 8-pin mini-DIN data port (DATA socket). This
The Signalink SLUSB8PM radio interface cable can be used with the Signalink USB sound card and with practically all Xiegu radios which have an 8-pin mini-DIN data port (DATA socket). This includes,
Be the first to ask a question about this product!
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal