Coaxial cable RG-402 with SMA Male angled x2

Very low loss RG-402 coaxial cable with angled SMA Male on both side, 50 ohms and with a length of 10cm.

Note: This rigid cable can be bent but once installed in its position of use, the cable must not be put in another position, under penalty of altering its performances and capacities.

Accessories

Pigtail SMA Male - N Female 15/50/100cm
SMA Male to N Female Adapter. Coaxial cable RG 316 50 ohms. Available in 15cm, 50cm or 1 meter length (to choose from below).
8,90 €
In stock
Pigtail SMA Male to UHF Female
SMA Male to UHF Female Adapter. RG 316 coaxial cable 50 ohms, about 15cm long.
6,90 €
In stock
Pigtail SMA Male - SMA Male 15/30/50/100cm
Pigtail RF adapter SMA Male to SMA Male to connect for example a converter Ham it up to a HackRF One, or SDRPlay, and any device with a SMA female connector. Coaxial cable RG 316 50 ohms. Available in
5,00 €
Out of stock, available 7-10 days
Coaxial cable low loss 2X SMA Male
Cable SMA Male to SMA Male with 50-ohm coaxial cable low loss KSR195 for use from 0 to 6GHz.Length: 0,5m (50cm), 1, 3 or 5 metersConnector 1: SMA MaleConnector 2: SMA Male
8,90 €
In stock, send from Europe
Cable coaxial 1, 2, 5 or 10m SMA-Male UHF-Male (KSR195)
Coaxial cable SMA Male to UHF Male with 50-ohm coaxial cable low loss KSR195 for use from 0 to 6GHz.Length: 1, 2, 5 or 10 metersConnector 1: SMA MaleConnector 2: UHF Male
12,50 €
In stock
Coaxial Cable 1, 2, 5 or 10m SMA Male and Bare Tip (KSR195)
Coaxial cable 50 ohms low loss KSR195 5mm, for use from 0 to 6Ghz and with an SMA Male connector at one end and without connector at the other end (bare end to be welded or crimped).Length: Available
8,90 €
In stock
SMA Male Terminator 3Ghz dummy load 1W
This connector is a male SMA terminator/termination endowed with a dummy load 50 Ohms for a maximum power of 1 watt on frequencies from 0 to 3Ghz. Connectors end 1: SMA maleConnectors end 2: Dummy
5,40 €
In stock
RG402 rigid coaxial cable with SMA Male - SMA Male very low loss
Very low loss coaxial cable with SMA Male connector on each end, for example to connect a 2.4Ghz amplifier to a transverter for OQ-100, or any use requiring a very low loss cable like the
6,00 €
In stock