Selection of antennas for the reception of ADS-B signals from airplanes on the 1090 MHz frequency: outdoor antenna, 1090 MHz vertical antenna, 1090 portable antenna, with SMA or N connector.
In terms of receiver for ADSB we recommend using an RTL-SDR dongle with RTL1090 software for Windows, planeplotter or Dump1090 for Linux with a Raspberry Pi and to add a pre-amp filter to improve the number of decoding and coverage distance.
Tilting antenna for receiving ADS-B signals and ACARS message on 1090 MHz frequency, with SMA male connector. Available in 2 versions: 3.5dBi (11cm) or 5dBi (19cm).Length: 11cm / 19cmWeight: 9g /
This 1090 Mhz ADS-B bandpass / band-stop filter to improve ADS-B reception performance and suppress parasitic signals outside the 1090Mhz band. With SMA male and SMA female connector. Compatible with
This 1090 Mhz ADS-B LNA pre-amplifier and SAW filter is designed to improve reception performance and increase the number of ADS-B messages received and decoding. It incorporates an LNA and a SAW
AirNav RadarBox FlightStick is a precision-tuned ADS-B receiver dongle for peak performance on 1090 MHz, with SMA connector.With integrated amplifier, 1090Mhz filter and static protection, for optimum
Fixed outdoor fiberglass antenna for ADS-B reception on 1090 Mhz, with SMA connector.Omnidirectional antenna optimized for long and short range ADS-B reception. It includes a 10 meter coaxial cable,
Omnidirectional antenna with ground plane (GP) to receive ADS-B between 1030 and 1090 MHz. The antenna is supplied without cable and no assembly. This antenna has a diode protection against
This LNA and SAW filter for the 1090Mhz improves ADS-B reception performance and increases the number of messages and data received from aircraft.This equipment combines 2 SAW filters and a LNA with a
High performance antenna for air bands VHF 120 MHz and 1090 MHz in UHF for ADS-B receiving. Antenna length: 106 cm Weight: 130g Gain: 2.15dBi (120MHz) and 5.5dBi (1090MHz only in reception)
Fixed vertical fiberglass antenna for outdoor use for 1090 Mhz ADSB band, with N female connector.This antenna consists of a half-wave dipole encapsulated inside a fiberglass radome with an aluminum
The Start ADS-B pack allows you to have a portable station for receiving ADS-B messages from aircraft and to follow their movements on a map in real time, via a Windows or Linux computer.Included in
This band-pass / bandstop ADS-B filter for the 1090Mhz improves ADSB receive performance and suppresses signals outside the 1090Mhz band.Delivered with: 1 F1OPA 1090Mhz SAW Bandpass Filter.
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal