Yaesu G-2800DXC rotor for very heavy applications.
Yaesu G-5500DC antenna rotor, Azimuth-Elevation combination, especially for space communications.
Yaesu G-1000DXC rotor for medium / heavy duty, DXC version with interface card for radio connection, equipped with preset and rotational speed adjustment.
Yaesu GS-232B computer control interface for DXC/DXA series antenna rotors and G-5500 rotors.Includes interface cables for connections to the rotor controller and to a PC serial port.Yaesu rotators
Yaesu G-450CDC antenna rotator for maximum vertical load of 100kg.Requires optional mast support GC-038 to be mounted on top of the mast.Wind load: 1m². Stationary torque: 3000kg/cm Rotating torque:
The mAT-40 is an automatic HF/SSB tuner that allows quick tuning of any unbalanced or single wire antenna automatically. Depending on the interface cable added, it can work with Yaesu (mAT-40-Y), ICOM
Yaesu YA-30 antenna with wideband folded dipole for frequencies from 1.8MHz to 30MHz, maximum input power 150W. Total length: 25.3 meters, 17 meters in inverted V configuration. Supplied with 9 meters
The mAT-10 is a compact tuner for use with the YAESU FT-817 and FT-818 transceivers and can also be used with other QRP transceivers. It can tune dipoles, verticals, Yagis, or virtually any coax-fed
Yaesu ATAS-25 portable antenna with manual synchronization from 7Mhz to 430Mhz, compatible with Yaesu FT-818ND, FT-891, FT-991A radios. Designed to be mounted on a standard camera tripod (1/4 "stud),
The AS603 tripod is designed for the DAP-450 and DAP-600 masts. The holder is equipped with an adapter ring, so that the two masts with different diameters are held securely. Other masts can be used
Diamond DAP-450 telescopic pole in 4 sections with diameters from 34 to 22mm, for a minimum height of 1.4m to a maximum of 4.5m, full extension. High strength anodised aluminium construction, complete
Absorber seal for Yaesu GA-3000 rotators.
Yaesu GS-680U universal bearing.
The Komunica SX-201 VSWR Meter allows the measurement of VSWR for frequencies from 1.8 to 200 MHz with a power up to 200 Watts (HF). Supplied with: 1 SX-201, 1 12V power cable.
Reference: YAESU- ATBK-100-977
The Yaesu ATBK-100 is a counterpoise kit for the ATAS-120 motorized antenna.The ATBK-100 improves the ground plane for the VHF-UHF bands of 70cm (430Mhz), 2m (144Mhz) and 6m (50Mhz).Does not work for
SWRmeter and wattmeter Diamond SX100, measures the reflected power and VSWR on the HF bands from 1.6 to 60 Mhz and for powers of 30/300/3KW maximum.Frequency: 1.6 to 60MhzPower ranges: 30/300/3000
Absorber seal for Yaesu GA-2500 rotators.
Yaesu GS-065 65mm thrust bearing.
Yaesu GC-048 hose clamps for mounting the rotator on a mast.
Yaesu GS-050 50mm thrust bearing.
Yaesu GC-038 clamps for mounting the rotator on a mast.
Yaesu SCU-28 linear amplifier connection cable, 10-pin mini-DIN connectors to bare wires, compatible with Yaesu FT-450D, FT-950, FTDX-1200 station.
The Diamond CLB is a robust mounting bracket for attaching a mobile antenna to a mast with a diameter of 10 to 52mm. This mount accepts antenna bases (not included) and standard SO-239 (UHF female).
mAT-40-Y interface cable that connects the mAT-40 automatic tuner to a YAESU transceiver.
Yaesu SCU-27 antenna rotator connection cable, compatible with Yaesu FTDX5000MP, FTDX3000D, FT-2000 (D) and rotor G-1000DXC, G-2800DXC sets.
Yaesu GL-33 mast adjustment plate.
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal