Nooelec's Ham It Up v1.3 is an up-converter HF, equipped with the 125Mhz filter soldered on the PCB and allows to listen to all MF / HF bands from 0.5 to 50 Mhz, in all modes of modulation, from a
MCX Male to SMA Male RF Adapter. The MCX connector is compatible with the USB Dongle DVB-T RTL2832 +R820T & R820T2.RG 316 coaxial cable 50 ohms, about 15cm long.
SMA Male UHF Female (SO-239) Adapter.
SMA Male to UHF Male Adapter. RG 316 coaxial cable 50 ohms, about 15cm long.
Coaxial cable with BNC Male - SMA Male connector with coaxial cable RG316 ohms for use in frequency from 0 to 3000Mhz.Available in different lengths: 15cm, 30cm or 50cmConnector 1: BNC MaleConnector
SMA Male to N Female Adapter. Coaxial cable RG 316 50 ohms. Available in 15cm, 50cm or 1 meter length (to choose from below).
SMA Male to UHF Female Adapter. RG 316 coaxial cable 50 ohms, about 15cm long.
Adapter SMA Male to N Female.
SMA Male to BNC Female Adapter. RG 316 coaxial cable 50 ohms, about 15cm long.
Adaptateur SMA Male vers BNC Femelle. Compatible avec la carte converter HF Ham It Up, HackRF et le récepteur SDR FUNcube Dongle Pro+.
This RF adapter allows is equipped with an SMA Male connector on both sides.It allows to connect for example 2 cables or connectors in SMA female.
Cable SMA Male to SMA Male with 50-ohm coaxial cable low loss KSR195 for use from 0 to 6GHz.Length: 0,5m (50cm), 1, 3 or 5 metersConnector 1: SMA MaleConnector 2: SMA Male
Coaxial cable SMA Male to UHF Male with 50-ohm coaxial cable low loss KSR195 for use from 0 to 6GHz.Length: 1, 2, 5 or 10 metersConnector 1: SMA MaleConnector 2: UHF Male
Coaxial cable 50 ohms low loss KSR195 5mm, for use from 0 to 6Ghz and with an SMA Male connector at one end and without connector at the other end (bare end to be welded or crimped).Length: Available
Be the first to ask a question about this product!
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal