> Radio Antennas>Mounting bracket>Dummy load

Dummy load

Selection of dummy loads and non-radiating antennas, at 50 ohms.

Showing 1 - 12 of 12 items
  • 0 to 3GHz 200W 50-ohm dummy load with N male connector
    65,80 €

    Reference: RFKONNECT-CHARGE-78T953-2201

    0 to 3GHz 200W 50-ohm dummy load with N male connector

    200W 50 Ohm Dummy Load with N Male connector.Duty cycle :10 seconds max. at 200W 120 seconds max. at 100W 40W continuous

    65,80 €
  • DC dummy load at 1GHz 100W Max. 50 Ohms with UHF male connector (PL-259)
    57,50 €

    Reference: RFKONNECT-CHARGE-81T411-2200

    DC dummy load at 1GHz 100W Max. 50 Ohms with UHF male connector (PL-259)

    High quality 100W DC-1GHz 50 ohm RF dummy load with PL259 connector.- Power: 100W Max (intermittent) 20W Max (continuous)- Power cycle : 20W (AVG intermittent 5min Tx 5 min Rx), 50W (AVG intermittent

    57,50 €
  • Dummy load Diamond DL-50A 0-500Mhz 50 ohms 15W
    34,13 €

    Reference: DIAMOND-DL50A-1735

    Dummy load Diamond DL-50A 0-500Mhz 50 ohms 15W

    This 50 ohm Diamond DL-50A dummy load operates from 0 to 500Mhz with a maximum power of 15W, UHF male connector (PL-259)Frequency: DC-500 MHz Power Rating: 15 watts continuous, 100 watts peak

    34,13 €
  • Dummy load 0-500 MHz 50 Ohm 15W Nagoya Antenna RF measuring devices NAGOYA-L20-UHF-456
    19,67 €

    Reference: NAGOYA-L20-UHF-456

    Dummy load 0-500 MHz 50 Ohm 15W Nagoya L20

    This dummy load 50 ohms Nagoya L20 runs from 0 to 500MHz with a maximum power of 15W or 100W (during 2 seconds max), with UHF male connector (PL-259) or N male plug (choose below). Genuine Nagoya

    19,67 €
  • 0 to 3GHz 10W 50-ohm dummy load with SMA male connector
    16,60 €

    Reference: RFKONNECT-CHARGE-81T413-2203

    0 to 3GHz 10W 50-ohm dummy load with SMA male connector

    High Quality 10W SMA Male Connector Dummy Load 50ohm DC0 - 3GHz RF Coaxial Load Radio AccessorySpecification :- Power : 10W- SWR : ≤1.20- Impedance : 50ohm- Frequency range : DC 0 - 3.0GHz-

    16,60 €
  • 0 to 3GHz 10W 50-ohm dummy load with N male connector
    16,60 €

    Reference: RFKONNECT-CHARGE-81T412-2202

    0 to 3GHz 10W 50-ohm dummy load with N male connector

    High Quality 10W N-Type Male Connector Dummy Load 50ohm DC0-3GHz Coaxial Load Radio AccessorySpecification:- Housing material: brass. Ternary alloy coating- Insulation material: PTEF- Inner conductor:

    16,60 €
  • SMA Calibration Kit with 50 Ohm dummy load for MiniVNA Passion Radio SMA MINIVNA-CALIBRATION-727
    16,58 €

    Reference: RF-KONNECT-87T299-CALIBRA-727

    SMA Calibration Kit with 50 Ohm dummy load for MiniVNA NanoVNA & VNA

    This calibration kit can be used with any SMA connector device, such as the MiniVNA Tiny and PRO2 or NanoVNA and any VNA.The SMA calibration kit consists of a dummy load of 50 ohms, an open circuit

    16,58 €
  • SMA termination male 6Ghz - Dummy load 1W Passion Radio SMA ADAPT-SMA-CHARGE2-577
    8,25 €

    Reference: ADAPT-SMA-CHARGE2-577

    6Ghz SMA male termination - 1W dummy load

    This connector is an SMA male terminated with a 50 Ohm dummy load for maximum power of 1 Watt at frequencies from 0 to 6 GHz. Terminal 1 : SMA maleTerminal 2 : Dummy load 1W maximum continuous

    8,25 €
  • Termination SMA male 3Ghz - Dummy load 1W Passion Radio SMA ADAPT-SMA-CHARGE1-576
    4,50 €

    Reference: ADAPT-SMA-CHARGE1-576

    SMA male 3Ghz termination - 1W dummy load

    This connector is an SMA male terminated with a 50 Ohm dummy load for maximum power of 1 Watt at frequencies from 0 to 3Ghz. Terminal 1 : SMA maleTerminal 2 : Dummy load 1W maximum continuous

    4,50 €
  • RP-SMA termination male 3Ghz - Dummy load 1W Passion Radio RP-SMA ADAPT-RP-SMA-CHARGE3-579
    4,50 €

    Reference: ADAPT-RP-SMA-CHARGE3-579

    RP-SMA male 3Ghz termination - 1W dummy load

    This connector is an RP-SMA male terminated with a 50 Ohm dummy load for maximum power of 1 Watt at frequencies from 0 to 3Ghz. Terminal 1 : RP-SMA male (Reverse SMA)Terminal 2 : Dummy load 1W maximum

    4,50 €
  • BNC male 3Ghz termination - Dummy load 1W Passion Radio BNC ADAPT-BNC-CHARGE4-580
    3,29 €

    Reference: ADAPT-BNC-CHARGE4-580

    BNC male 3Ghz termination - 1W dummy load

    This connector is a BNC male terminated with a 50 Ohm dummy load for maximum power of 1 Watt at frequencies from 0 to 3Ghz. Terminal 1 : BNC maleTerminal 2 : Dummy load 1W maximum continuous Impedance

    3,29 €
  • 0 to 6GHz 2W 50-ohm dummy load with SMA male connector
    2,40 €

    Reference: RFKONNECT-CHARGE-81T414-2204

    0 to 6GHz 2W 50-ohm dummy load with SMA male connector

    Charge 0 - 6G 13mm SMA Load Terminal with Male Connector 2W 50ohm SMA - J Connector RF Radio AccessorySpecification :- Frequency : 0 - 6GHz- Size : 13mm (Height)- Power : 2WPackage Included :- 1 x SMA

    2,40 €
Showing 1 - 12 of 12 items

Delivery Europe & Overseas

Stock and shipped from France

Product return

14 days to return, 2 warranty

Email support

Response within 24h to 72h

Secure payment

SSL, VISA, Mastercard, Paypal

Copyright 2014-2024 - Passion Radio / 4 MY PEOPLE.
Les photos et coloris ne sont pas contractuels.