Equipement from manufacturer Wimo France

• 

  559,00 € tax incl.

  Reference: MINIVNA1-TINY-365

  miniVNA Tiny 1-3000 MHz Analyzer & RF Generator

  Frequency range 1-3000 MHz, 2 ports VNA with S11 and S21, RF Generator with output power of -6dBm @ 500 MHz, Low power consumption, 370mA @ 5 V, SMA connectors, boot loader for future firmware

  559,00 € tax incl.
• 

  465,00 € tax incl.

  Reference: MINIVNA-PRO2-366

  miniVNA PRO² Analyzer Bluetooth 0.1 - 230 Mhz

  The mini-VNA Pro² BT is a portable VNA antenna and network analyzer that covers from 0.1 to 230Mhz, it has a 1000mAh internal Li-ion battery and a new Bluetooth interface to let use the mini-VNA Pro

  465,00 € tax incl.
• 

  31,90 € tax incl.

  Reference: MINIVNA-CALIBRATION-727

  SMA Calibration Kit with 50 Ohm dummy load for MiniVNA NanoVNA & VNA

  This calibration kit can be used with any SMA connector device, such as the MiniVNA Tiny and PRO2 or NanoVNA and any VNA.The SMA calibration kit consists of a dummy load of 50 ohms, an open circuit

  31,90 € tax incl.
• 

  31,90 € tax incl.

  Reference: WIMO-2500MHZ-FOUDRE-1540

  Surge arrester Diamond SMA-Female 200W 0-2500MHz

  This Diamond surge arrester works for frequencies from 0 to 2500 MHz and for a maximum transmission power of 200W, it is equipped with SMA Female connectors and an insertion loss of -0.9 dB. This

  31,90 € tax incl.
• 

  29,50 € tax incl.

  Reference: WIMO-CABLE-EMBASE-SO239-954

  Coaxial cable with SO239 base for drilling

  Base for drilling support, with SO239 connector (female UHF) for screwing the antenna.The 6mm RG58U 50ohms cable is 4 meters long and has a PL259 (UHF Female) connector at its end.

  29,50 € tax incl.