No products




Viewed products
The mAT-600A is a high-power universal...
View larger
No review at the momentThe mAT-600A is a high-power universal automatic antenna tuner, designed to work with almost all transceivers and linear amplifiers on the market. Capable of supporting up to 600 Watts (SSB), it covers HF bands from 1.8 to 54 MHz with exceptional tuning speed thanks to its 16,000 memories.
Comes with: 1x mAT-600A Tuner, 1x DC power cable (5.5mm connector).
The mAT-600A from mAT-TUNER is the ideal solution for amateur radio operators looking for a robust and powerful automatic tuning unit, capable of handling intermediate power levels up to 600W SSB. Unlike tuners dedicated to a specific brand, the mAT-600A is universal: it does not require a specific data control cable. It simply connects to the coaxial line and detects RF to tune.
Its installation is simple: connect your transmitter (or the output of your linear amplifier) to the RF-IN input, and your antenna to the ANTENNA output. Power it with 12V, and it's ready to use. To start a tuning cycle, simply send a low-power carrier (5-15W) and press the TUNE button on the front panel.
| Frequency Range | 1.8 MHz - 54 MHz |
| Max Power (SSB) | 600 Watts |
| Required Tuning Power | 5 to 15 Watts (do not exceed for tuning) |
| Tuning Time | 0.1 sec (memory) / Max 8 sec (full scan) |
| Number of Memories | 16,000 channels |
| Input Impedance | 50 Ohms |
| Antenna Connectors | 2x SO-239 (UHF Female) |
| Power Supply | DC 12-14V, 1.0A (5.5 x 2.1mm Connector) |
| Dimensions | 192 x 205 x 76 mm |
| Weight | 1.9 Kg (Net) |
| Materials | Aluminum Casing, CNC Machined Front Panel |
| Operating Temperature | -10°C to +60°C |
Reduce your transmitter's power to between 5 and 15 Watts, switch to FM or CW mode (continuous carrier), then press the TUNE button on the tuner's front panel. Once tuning is found (Tuning LED off), you can increase your power up to 600W SSB.
Yes, the mAT-600A is designed to be placed after a linear amplifier, as long as the power does not exceed 600W SSB. Always ensure to tune with the amplifier in Standby (Bypass) mode or at low power before activating amplification.
The WARN LED lights up only during the tuning cycle if the injected RF power is too low or too high to allow correct tuning. Adjust your power between 5 and 15W if it lights up.
No, it's a universal tuner. It does not use Icom, Yaesu, or Kenwood control cables. It operates autonomously by detecting RF and via manual action on the TUNE button.
No, the mAT-600A is designed for fixed indoor station use (shack). It is not waterproof.
Reference: KOM-HFEXPLORER1-1005
Multiband antenna from 3.5 to 145Mhz Komunica HF-EXPLORER-1 for portable use on the HF bands 80/40/20/15/10/6m as well as on the 2m band (145Mhz) and the aviation band 118-136Mhz, in transmission and
75,00 €
Reference: KOM-285VS-1747
Komunica 285VS mobile antenna, VHF 134-174MHz, 132cm, reinforced spring, UHF-Male connector (PL-259).Type : 5/8 wave mobile antenna with reinforced spring Gain : 3.4 dB Frequency: VHF 134-174 MHz
32,94 €
Reference: PR-ADAPT-BNC-KIT-1853
Connectivity pack of 6 BNC input RF adapters with carrying case PASSION RADIO. Delivered with: 1 x BNC female to SMA female adapter, 1 x BNC male to SO239 (UHF female), 1 x BNC male to SMA female, 1 x
Reference: WINDCAMP-GIPSY-BALUN-3047
High-performance 1:1 voltage balun specially designed for amateur radio antennas. This compact, lightweight balun ensures a perfect impedance match between your transceiver and your antenna over the
Shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal
Copyright 2014-2026 - Passion Radio / 4 MY PEOPLE
Les photos et coloris ne sont pas contractuels.