No products
New products
-
-
EFHW Digitenna 20W portable HF antenna SOTA POTA QRP
109,87 € tax excl. -
Nooelec LaNA WB LNA broadband 300 MHz to 8 GHz ultra low noise USB-C
85,41 € tax excl. -
Viewed products
-
VBOLT-25 V-bolt with...
Can be used with our TMA-2 telescopic masts and...
-
SIRIO SA 270 MN 144-430MHz antenna
82,66 € -10% 91,85 €
View larger 
VBOLT-25 V-bolt with nuts for poles and masts
No review at the momentCan be used with our TMA-2 telescopic masts and TMF-1.5/2/3 GRP versions. This V-bolt also fits all our TandK supports and stands, except the SO-6.
Key features/specifications:
- Type: 65mm (2.5") 3/8th heavy-duty V-bolt.
- Size: Fits up to 65mm (2.5")
Customers also bought
9,90 €Reference: MOON-09-139-PTP20S-2137
PTP-20S universal mast balcony & pole antenna mount Nut Pole To Pole Clamp
Universal pole-to-pole or balcony mount designed for antennas with 31 to 51mm masts.
9,90 €
1,90 €Reference: MOON-09-180-VB20V-2110
VBOLT-20 V bolt with nuts for poles and mastsMoonraker
51mm (2") 3/8th thread heavy duty V-bolt Size: Fits 31-51mm (1.25-2.5") poles or masts
1,90 €
7,90 €Reference: MESSI-CO-N-10M-S-1140
N-Male connector for 10.3mm cable AIRBORNE 10 HYPERFLEX 10 RG213
N-Male to soldering, Messi & Paoloni connector for M&P AIRBORNE 10, HYPERFLEX 10, ULTRAFLEX 10 and RG213 PLUS 10.3mm coaxial cable.New design with double seal to ensure perfect protection
7,90 €
8,88 €Reference: RFKONNECT-GAINE-81T405-2195
Box of 150 pieces of heat-shrink tubing
Packaged box DIY Heat Shrink Tube Insulation Sleeve for Electric Wire and Cable Flame Retardant Shrink TubeMethod of use:- Prepare the tools- Insert the wires to be connected into the heat-shrink
8,88 €
We also recommend
1,80 €Reference: MASTRANT-CLIP-ADC03-1911
Duplex steel cable clip 3 to 10 mm for guy wires
Cable clamp (duplex clip) prevents spontaneous loosening, strong counter-pressure due to the elasticity of the ropes. The 2 nuts allow for easy loosening for adjustments. To be used with a heart lug
1,80 €
1,80 €Reference: MASTRANT-GRIP-ASC03-1912
Stainless steel cable clamp for 3 to 10 mm guy wires
Stainless steel cable clamp for guy wires, easy to install thanks to the long threaded section. For optimal hold, we recommend using 3 cable ties and a heart-shaped lug per fixing point.
1,80 €
0,50 €Reference: MASTRANT-GRIPZN-ASCZ05-1913
5 or 10 mm galvanised steel cable clamp for bracing
Cable clamp made of galvanised steel (zinc coated) for bracing. For optimal support, we recommend 3 cable ties and a heart-shaped lug per fixing point.
0,50 €Reference: MASTRANT-TJJ-ASHF10-1934
Stainless steel clevis turnbuckle for 10 or 12 mm diameter guy rope
Stainless steel turnbuckle for guy ropes, diameter 10 or 12 mm (to be selected below). The working load (SWL) for turnbuckles is the maximum load during a length change. For the calculation of the
13,73 €17,16 €
Reviews
Additional or similar equipment
-
Duplex steel cable clip 3 to 10 mm for guy wires
Cable clamp (duplex clip) prevents spontaneous loosening, strong counter-pressure due to the elasticity of the ropes. The 2 nuts allow for easy loosening for adjustments. To be used with a heart lug
1,80 € tax incl.In stock1,50 €tax excl.
-
Stainless steel cable clamp for 3 to 10 mm guy wires
Stainless steel cable clamp for guy wires, easy to install thanks to the long threaded section. For optimal hold, we recommend using 3 cable ties and a heart-shaped lug per fixing point.
1,80 € tax incl.In stock1,50 €tax excl.
-
5 or 10 mm galvanised steel cable clamp for bracing
Cable clamp made of galvanised steel (zinc coated) for bracing. For optimal support, we recommend 3 cable ties and a heart-shaped lug per fixing point.
0,50 € tax incl.In stock0,42 €tax excl.
Stainless steel clevis turnbuckle for 10 or 12 mm diameter guy rope
Stainless steel turnbuckle for guy ropes, diameter 10 or 12 mm (to be selected below). The working load (SWL) for turnbuckles is the maximum load during a length change. For the calculation of the
13,73 € tax incl.In stock11,44 €tax excl.
17,16 € -20%
Carplate-HD for matt mounting on Moonraker car wheels
Plate to support a mast using a car wheel.Size: 46 X 23cm Height: 15cm socket X 52mm diameter Suitable for masts of 50mm or less
49,90 € tax incl.Out of stock, available within 1 to 2 months41,58 €tax excl.
-
VBOLT-20 V bolt with nuts for poles and mastsMoonraker
51mm (2") 3/8th thread heavy duty V-bolt Size: Fits 31-51mm (1.25-2.5") poles or masts
1,90 € tax incl.In stock1,58 €tax excl.
VBOLT-15 V-bolt with nuts for poles and masts
37 mm (1.5") V-bolt with 8 mm thread for heavy-duty use Size: to fit 25-37mm (1-1.5") poles or masts
1,00 € tax incl.In stock0,83 €tax excl.
-
PTP-20S universal mast balcony & pole antenna mount Nut Pole To Pole Clamp
Universal pole-to-pole or balcony mount designed for antennas with 31 to 51mm masts.
9,90 € tax incl.In stock8,25 €tax excl.
Europe & Overseas
Shipped from France
Product return
14 days to return, 2 warranty
Email support
Response within 24h to 72h
Secure payment
SSL, VISA, Mastercard, Paypal
Copyright 2014-2025 - Passion Radio / 4 MY PEOPLE.
Les photos et coloris ne sont pas contractuels.