The Signalink SLMODR1Y Jumper module is compatible for use with the Signalink USB sound card and with practically all TYT and Yaesu radios with an RJ11 microphone socket. This includes, but is not limited to, the radios listed below.
The radio cable compatible with this jumper module (jumper) bears the reference: SLUSBRJ1 .
In case of doubt, you can check using the guide to download in PDF below, the correct reference of radio cable and jumper module (jumper) for your set.
Supplied with: 1 Signalink SLMOD-R1Y Jumper module.
Guide in French to choose the right radio cable and jumper according to the brand and model of the radio used. 177.6k
Guide in English to choose the right radio cable and jumper according to the brand and model of the radio used. 666.13k
** NOTE: The Mic jack on the FT-100 has a special PTT requirement and cannot use this jumper module unless it is modified. The modification is fairly straightforward, but if possible we recommend using the 6 pin Data Port on this radio instead.
If your radio is not in the above list, check out our other listings or contact us. We have a number of SignaLink references to fit most radios on the market.
New version Tytera TYT TH-9800 Plus - Quad band with 2 separate VFO for 10, 6, 2 meters and 70cm.- Covers 4 bands in FM mode 29/50/144 MHz with 50 watts, and 430 MHz with 40 watts- 108-118Mhz AM
The Signalink SLUSBRJ1 radio interface cable can be used with the Signalink USB sound card and with practically all TYT and Yaesu radios which have an RJ11 microphone socket . This includes, but is
The Signalink-RJ1 interface pack is compatible with TYT and Yaesu radios equipped with an RJ11 microphone socket, such as: TYT TH-9800, TH-7800, Yaesu FT-2900R, FT-7900R, FT-8900R (list below below).
Be the first to ask a question about this product!
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal