No products
New products
-
INRAD W1 High quality headset with 6.35mm stereo and 3.5mm mono jacks
207,50 € tax excl. -
6m extension kit for ProSisTel V dipole antenna
63,41 € tax excl. -
50MHz vertical J antenna for the 6m PST6J ProSisTel
126,97 € tax excl. -
LILYGO T-BEAM SUPREME SX1262 433 MHz Meshtastic LoRa WiFi BT5 GPS
55,78 € tax excl.
Viewed products
-
Signalink SLCAB-6PM...
The Signalink SLCAB6PM radio interface cable...
-
Interface cable mAT-40-K MAT-TUNER for KENWOOD transceivers
22,21 € -3% 22,90 €
Signalink SLCAB-6PM Mini-DIN 6-pin radio cord for Icom Yaesu Kenwood
Read the 6 reviewsThe Signalink SLCAB6PM radio interface cable can be used with the Signalink USB sound card and with virtually all ICOM, Kenwood and Yaesu radios which have a 6-pin mini-DIN data port (DATA socket). This includes, but is not limited to, the radios listed below.
The jumper module compatible with this cable bears the reference: SLMOD6PM.
If in doubt, check the guide below by searching the PDF download document to find the correct cable and jumper module reference for your radio.
Supplied with: 1 Signalink SLCAB-6PM radio cord.
Download
Guide in French to choose the right radio cable and jumper according to the brand and model of the radio used. 177.6k
Guide in English to choose the right radio cable and jumper according to the brand and model of the radio used. 666.13k
Data sheet
ICOM
IC-207H, IC-208H
IC-2720H
IC-2800, IC-2820
IC-703
IC-706MKIIG
IC-746PRO
IC-7000
IC-7100
IC-7400
IC-910H
ID-880
IC-9100
KENWOOD
TM-251/255
TM-271 **, TM-271A **
TM-451/455
TM-D700, TM-D700A
TM-D710, TM-D710A, TM-D710E
TM-G707
TM-V708
TM-733A
TM-V7, TM-V7A, TM-V71A
TS-480HX, TS-480SAT
** European models TM-271 / 271A only
YAESU
FT-100, FT-100D
FT-817, FT-817ND
FT-450
FT-840 **
FT-847 **
FT-857
FT-891
FT-897
FT-950
FT-991
FT-DX1200
FT-DX3000
FT-1500M
FT-7100
FT-7800R
FT-7900R
FT-8100
FT-8500
FT-8800R, FT-8900R
FTM-100DR ##
FTM-350 **
FTM-400DR ##
VX-1700
** Data port supports VHF and UHF packets only.
** The FTM-350 requires Yaesu's CT-141 adapter to switch from its 8-pin mini-DIN connector to a standard 6-pin mini-DIN.
## The FTM-100DR and FTM-400DR require Yaesu's CT-164 adapter to convert a 10-pin mini-DIN connector to a standard 6-pin mini-DIN.
Customers also bought
12,90 €Reference: SIGNALINK-JUMPER-SLMOD6PM-1479
Jumper Signalink SLMOD-6PM V2 for Icom Yaesu Kenwood Mini DIN Data 6-pin
The Signalink SLMOD6PM V2 Jumper module is compatible for use with the Signalink USB sound card and with virtually all ICOM, Kenwood and Yaesu radios that have a 6-pin mini-DIN data port. This
12,90 €
145,00 €Reference: TIGER-SIGNALINK-BOITIER-1455
Signalink USB from Tigertronics Radio interface & sound card for digital modes
The Signalink USB radio interface from Tigertronics is a USB sound card that allows you to receive and transmit from a computer to practice digital modes such as SSTV, RTTY, Packet, PSK, ROS, FT8,
145,00 €
114,46 € 118,00 € tax excl. -3%tax excl. Out of stock, available in 2 to 3 months-3%
Reference: DIAMOND-X300-V1-UHF-955
Antenna DIAMOND X300 VHF UHF 144/430Mhz
Diamond X300 antenna for fixed use on VHF UHF bands of 144/430 MHz with SO239 connector (female UHF) or N female to choose, and with 3 radians.Antenna type: 2x 5/8 wave (144MHz) and 5x 5/8 wave
114,46 €118,00 €
Reduced price!
34,90 €Reference: SIGNALINK-CABLE-SLCAB8PD-1485
Signalink SLCAB-8PD Mini-DIN 8-pin DATA radio cable for Icom Ten-Tec
The Signalink SLCAB8PD radio interface cable can be used with the Signalink USB sound card and with practically all ICOM, Ten-Tec radios which have an 8-pin mini-DIN data port (DATA socket). This
34,90 €
We also recommend
69,00 €Reference: YAESU-SCU57-661
USB cable kit SCU-57 programming & WIRES-X for Yaesu FT2D FT3D FT5D (EX SCU-39)
USB programming SCU39 kit for the Yaesu FT2D, FT3D walkie-talkie (all versions: FT2DE, FT2DR, FT3DE, FT3DR) and FT5D.This Yaesu SCU57 connection kit also allows the user of an FT-3D or FT-2D, to have
69,00 €
149,00 €Reference: YAESU-CAT-SCU17-1085
CAT control interface Yaesu SCU-17 for FT-DX1200 FT-950 FT-450D
The Yaesu SCU-17 interface is a CAT control system that allows you to control a Yaesu transceiver from a computer and to be able to practice digital communication modes, also called digimodes such as
149,00 €
38,00 €Reference: YAESU-CT-62-1316
CAT Control Yaesu CT-62 interface cable with RS232 for SCU-17 & FT-818 FT-817 FT-857
Yaesu CT-62 CAT interface cable with RS232 connector compatible with all versions of FT-818, FT-100, FT-817, FT-857 and FT-897 transceivers.This cable is required to connect compatible Yaesu
38,00 €- 12,90 €
Reference: SIGNALINK-JUMPER-SLMOD6PM-1479
Jumper Signalink SLMOD-6PM V2 for Icom Yaesu Kenwood Mini DIN Data 6-pin
The Signalink SLMOD6PM V2 Jumper module is compatible for use with the Signalink USB sound card and with virtually all ICOM, Kenwood and Yaesu radios that have a 6-pin mini-DIN data port. This
12,90 €
Reviews
Même si c\'est rappel c\'est appréciable.
100% conforme à la description ...++++
Vraiment tres bien, un peu cher pour un cordon, mais tres satisfait
Bien dimensionné
Additional or similar equipment
-
USB cable kit SCU-57 programming & WIRES-X for Yaesu FT2D FT3D FT5D (EX SCU-39)
USB programming SCU39 kit for the Yaesu FT2D, FT3D walkie-talkie (all versions: FT2DE, FT2DR, FT3DE, FT3DR) and FT5D.This Yaesu SCU57 connection kit also allows the user of an FT-3D or FT-2D, to have
69,00 € tax incl.In stock57,50 €tax excl.
-
CAT control interface Yaesu SCU-17 for FT-DX1200 FT-950 FT-450D
The Yaesu SCU-17 interface is a CAT control system that allows you to control a Yaesu transceiver from a computer and to be able to practice digital communication modes, also called digimodes such as
149,00 € tax incl.In stock124,17 €tax excl.
-
CAT Control Yaesu CT-62 interface cable with RS232 for SCU-17 & FT-818 FT-817 FT
Yaesu CT-62 CAT interface cable with RS232 connector compatible with all versions of FT-818, FT-100, FT-817, FT-857 and FT-897 transceivers.This cable is required to connect compatible Yaesu
38,00 € tax incl.In stock31,67 €tax excl.
-
Jumper Signalink SLMOD-6PM V2 for Icom Yaesu Kenwood Mini DIN Data 6-pin
The Signalink SLMOD6PM V2 Jumper module is compatible for use with the Signalink USB sound card and with virtually all ICOM, Kenwood and Yaesu radios that have a 6-pin mini-DIN data port. This
12,90 € tax incl.In stock10,75 €tax excl.
Signalink SLCAB-RJ1 radio cable for RJ11 TYT and Yaesu microphone socket
The Signalink SLCABRJ1 radio interface cable can be used with the Signalink USB sound card and with practically all TYT and Yaesu radios which have an RJ11 microphone socket . This includes, but is
23,90 € tax incl.In stock19,92 €tax excl.
-
Signalink SLCAB-8PD Mini-DIN 8-pin DATA radio cable for Icom Ten-Tec
The Signalink SLCAB8PD radio interface cable can be used with the Signalink USB sound card and with practically all ICOM, Ten-Tec radios which have an 8-pin mini-DIN data port (DATA socket). This
34,90 € tax incl.In stock29,08 €tax excl.
Signalink SLCAB-8R micro 8-pin radio cord Alinco Elecraft Icom Kenwood Yaesu
The Signalink SLCAB8R radio interface cable can be used with the Signalink USB sound card and with virtually all Alinco, Elecraft, ICOM, Kenwood and Yaesu radios that have an 8-pin micro plug . This
34,90 € tax incl.In stock29,08 €tax excl.
Signalink SLCAB-RJ4 radio cable micro RJ45 socket for Alinco Icom Kenwood Yaesu
The Signalink SLCABRJ4 radio interface cable can be used with the Signalink USB sound card and with practically all Alinco , ICOM, Kenwood, Yaesu radios and Anytone AT-578UV (V1 et V2). This radio
34,90 € tax incl.In stock29,08 €tax excl.
Delivery Europe & Overseas
Stock and shipped from France
Product return
14 days to return, 2 warranty
Email support
Response within 24h to 72h
Secure payment
SSL, VISA, Mastercard, Paypal
Copyright 2014-2024 - Passion Radio / 4 MY PEOPLE.
Les photos et coloris ne sont pas contractuels.