No products
Prices are tax included
Viewed products
-
Signalink-SLUSB-KX3...
The Signalink-SLUSB-KX3 interface pack is...
New products
-
-
120cm tripod for satellite dish
29,90 € tax incl. -
Xiegu CE-19 DIGI FT8 expansion port for X5105 and G90
75,00 € tax incl. -
Balun HF 1:1 QRO M0CVO 1.8-54Mhz 1kW (CW) 1.2kW (PEP)
69,00 € tax incl.
-
Chameleon CHA MPAS 2.0 and CHA HYBRID antenna mounting post
55,00 € 65,00 €
View larger 
Signalink-SLUSB-KX3 pack for Elecraft KX3 KX2 radio with 3.5mm microphone jack
No review at the momentThe Signalink-SLUSB-KX3 interface pack is compatible with Elecraft radios equipped with a 3.5mm microphone jack like the Elecraft KX2, KX3.
Low noise USB sound card
Quick and easy installation with jumper
RX and TX adjustment from the front panel
Supports ALL digital modes such as SSTV, RTTY, Packet, PSK, ROS, FT8, FT4, JS8, ACARS, etc.
Complete RF isolation between the computer and the radio
Transmit Audio output and external speaker jack
The package includes: The Signalink interface, the SLCABKX3 cord to connect the radio to the interface and the SLMODKX3 jumper to be installed inside the box, 1 x 2.5m USB cable, 1 x mono jack cable, 6 x 24 AWG pre-cut and stripped wires, 1 x 3/32 "Allen key, rubber feet, 1 x English manual.
Note: This interface does not allow the control of the frequency (CAT control) on the radio used, it allows to switch to PTT and to send a signal to the radio and to receive it, thanks to the USB peripherals created.
Pack content
145,00 € tax incl.Reference: TIGER-SIGNALINK-BOITIER-1455
1 x Tigertronics Signalink USB radio interface and sound card
The Signalink USB radio interface from Tigertronics is a USB sound card that allows you to receive and transmit from a computer to practice digital modes such as SSTV, RTTY, Packet, PSK, ROS, FT8,
145,00 € tax incl.
12,90 € tax incl.Reference: SIGNALINK-JUMPER-SLMODKX3-1491
1 x Jumper Signalink SLMOD-KX3 for Elecraft KX3 and KX2
This jumper module is compatible with our Elecraft KX3 radio cable which works with KX2 and KX3 radios (p / n SLCABKX3, SLUSBKX3, or SL1 + KX3). The radio cable compatible with this jumper module
12,90 € tax incl.
34,90 € tax incl.Reference: SIGNALINK-CABLE-SLCABKX3-1492
1 x Signalink SLCAB-KX3 radio cord for Elecraft KX3 and KX2 microphone socket
The radio cable p / n SLCABKX3 is designed to work with the radio interface of the SignaLink USB sound card as well as the old model SignaLink SL-1 + This radio cable is compatible with the KX2 and
34,90 € tax incl.
Download
Guide in French to choose the right radio cable and jumper according to the brand and model of the radio used. 177.6k
Guide in English to choose the right radio cable and jumper according to the brand and model of the radio used. 666.13k
Data sheet
- Power supply: USB port (Male B connector)
- Consumption: ~ 140mA in transmission, ~ 80mA nominal
- Operating temperature: -30 ° C to + 60 ° C
- Audio frequency response: 200 Hz - 4000 Hz at 600 ohms
- Sampling rate: 16 Bits, up to 48Khz
- Operating System: Windows 98SE, ME, 2000, XP, Vista, Windows 7, 8.x and Windows 10
- MAC OS 9.1, MAC OS X 10.00
- Z radio input / output: 600 Ohm
- Auto-PTT ™ delay: 30 ms to 3 seconds
- PTT circuit: Relay, rated value - 1A @ 24VDC (max), 0.5A @ 120VAC (max)
- Radio connection: Audio TX, Audio RX, PTT, GND and RJ-45 female
- RX audio / speaker: 3.5mm mono jack mono
- Housing: Extruded aluminum, powder coated
- Dimensions: 40 x 81 x 91 mm
- Weight: 187g
Compatible positions
This Signalink pack is compatible with the radios below:
Elecraft
KX2
KX3
Additional or similar equipment
-
Tigertronics Signalink USB radio interface and sound card
The Signalink USB radio interface from Tigertronics is a USB sound card that allows you to receive and transmit from a computer to practice digital modes such as SSTV, RTTY, Packet, PSK, ROS, FT8,
145,00 € tax incl.In stock120,83 €tax excl.
Signalink SLCAB-6PM Mini-DIN 6-pin radio cord for Icom Yaesu Kenwood
The Signalink SLCAB6PM radio interface cable can be used with the Signalink USB sound card and with virtually all ICOM, Kenwood and Yaesu radios which have a 6-pin mini-DIN data port (DATA socket).
34,90 € tax incl.In stock29,08 €tax excl.
Jumper Signalink SLMOD-6PM V2 for Icom Yaesu Kenwood Mini DIN Data 6-pin
The Signalink SLMOD6PM V2 Jumper module is compatible for use with the Signalink USB sound card and with virtually all ICOM, Kenwood and Yaesu radios that have a 6-pin mini-DIN data port. This
12,90 € tax incl.In stock10,75 €tax excl.
-
Jumper Signalink SLMOD-KX3 for Elecraft KX3 and KX2
This jumper module is compatible with our Elecraft KX3 radio cable which works with KX2 and KX3 radios (p / n SLCABKX3, SLUSBKX3, or SL1 + KX3). The radio cable compatible with this jumper module
12,90 € tax incl.Out of stock, available within 1-2 months10,75 €tax excl.
-
Signalink SLCAB-KX3 radio cord for Elecraft KX3 and KX2 microphone socket
The radio cable p / n SLCABKX3 is designed to work with the radio interface of the SignaLink USB sound card as well as the old model SignaLink SL-1 + This radio cable is compatible with the KX2 and
34,90 € tax incl.In stock29,08 €tax excl.
Signalink-SLUSB-RJ1 pack for TYT and Yaesu radio with RJ11 microphone socket
The Signalink-SLUSB-RJ1 interface pack is compatible with TYT and Yaesu radios equipped with an RJ11 microphone socket, for example: TYT TH-9800, TH-7800, Yaesu FT-2900R, FT-7900R, FT-8900R ( list
179,00 € tax incl.In stock149,17 €tax excl.
Reviews
Delivery Europe & Overseas
Stock and shipped from France
Product return
14 days to return, 2 warranty
Email support
Response within 24h to 72h
Secure payment
SSL, VISA, Mastercard, Paypal