No products




Viewed products
The mAT-125S is a versatile and compact...
View larger
No review at the momentThe mAT-125S is a versatile and compact automatic antenna tuner, designed to work with most HF transceivers on the market. Supporting up to 120W, it ensures fast and precise tuning over a wide frequency range of 1.8 to 54 MHz, ideal for both fixed and portable installations.
Comes with: 1 mAT-125S tuner, 1 DC power cable.
The mAT-125S from mAT-TUNER is the ideal solution for amateur radio operators looking for a universal, reliable, and easy-to-use automatic antenna tuner. Unlike tuners dedicated to a specific brand, the mAT-125S interfaces via the RF coaxial cable and does not require a proprietary control cable, making it compatible with almost all HF transceivers (Icom, Yaesu, Kenwood, Xiegu, etc.).
Its robust architecture allows it to support up to 120W of power, covering all HF bands as well as 6 meters. Thanks to its optimized tuning algorithms, it generally finds the best impedance in less than 5 seconds. Its compact size facilitates its integration into a fixed station or its transport for portable operations (POTA/SOTA).
| Frequency Range | 1.8 - 54 MHz |
| Max RF Power | 120 W (SSB/CW) |
| Tuning Time | < 5 seconds (typical) |
| Input Impedance | 50 Ohms |
| Modes | Automatic and Semi-automatic |
| RF Connectors | 2 x UHF Female (SO-239) |
| Power Supply | 12-14 V DC (External DC Jack) |
| Compatible Antennas | Long-wire, Dipoles, Verticals, Yagi |
Since it is a universal tuner, you must switch your radio to FM, AM, or CW mode, reduce the power to about 10-20W, then press the TUNE button on the tuner. Once tuning is found (LED off), you can switch back to full power in your usual mode.
Yes, it is compatible because it is a universal tuner. However, for these specific QRP models, dedicated tuners like the mAT-10 or mAT-705 may offer more advanced integration (direct control by the radio), but the mAT-125S will work perfectly in manual mode.
In automatic mode, the tuner monitors the SWR and starts a tuning cycle as soon as the SWR exceeds a certain threshold. In semi-automatic mode, tuning only starts when you press the TUNE button, which avoids unintended re-tuning during a transmission.
The casing is made of robust metal but is not waterproof. For outdoor use, it must be protected from rain and humidity.
Yes, the mAT-125S requires an external 12 to 14V DC power source via the rear jack connector to operate the relays and control electronics.
Reference: KOM-HFEXPLORER1-1005
Multiband antenna from 3.5 to 145Mhz Komunica HF-EXPLORER-1 for portable use on the HF bands 80/40/20/15/10/6m as well as on the 2m band (145Mhz) and the aviation band 118-136Mhz, in transmission and
75,00 €
Reference: KOM-285VS-1747
Komunica 285VS mobile antenna, VHF 134-174MHz, 132cm, reinforced spring, UHF-Male connector (PL-259).Type : 5/8 wave mobile antenna with reinforced spring Gain : 3.4 dB Frequency: VHF 134-174 MHz
32,94 €
Reference: PR-ADAPT-BNC-KIT-1853
Connectivity pack of 6 BNC input RF adapters with carrying case PASSION RADIO. Delivered with: 1 x BNC female to SMA female adapter, 1 x BNC male to SO239 (UHF female), 1 x BNC male to SMA female, 1 x
Reference: WINDCAMP-GIPSY-BALUN-3047
High-performance 1:1 voltage balun specially designed for amateur radio antennas. This compact, lightweight balun ensures a perfect impedance match between your transceiver and your antenna over the
Shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal
Copyright 2014-2026 - Passion Radio / 4 MY PEOPLE
Les photos et coloris ne sont pas contractuels.