USB programming SCU39 kit for the Yaesu FT2D and FT3D walkie-talkie (all versions: FT2DE, FT2DR, FT3DE, FT3DR).
This Yaesu SCU39 connection kit also allows the user of an FT-3D or FT-2D, to have a WIRES-X portable node station by directly connecting the computer by USB to the audio ports of a Windows computer, with the cables supplied.
Thanks to this new function, it is possible to directly access the WIRES-X connected network using the PTT button and the microphone of the walkie-talkie. The SCU-39 kit with the transceiver can also function as a WIRES-X access point.
With this connection kit, the HRI-200 Internet interface is not required to use the portable WIRES-X node function.
Note that the FT2D requires a firmware update to the latest version, to support the C4FM (Yaesu System Fusion) portable digital node function.
Comes with: 1 Yaesu SCU-19 USB cable, 1 CT-44 adapter, 2 Jack 2.5mm audio cables, Yaesu genuine warranty, delivered without CD.
Drivers Prolific 1.8.0 for Windows and USB programming cable SCU19 and SCU39 2.28M
Manual for installing drivers for Yaesu SCU-19 cable 1.15M
Yaesu ADMS-11 Windows Programming Software for FT2D or FT3D 71.31M
The WiRES-X software, programming CPS and SCU-39 cable drivers can be downloaded below.
Another programming software compatible with Windows and Mac: CHIRP.
Dual band antenna 2m / 70cm, original Diamond SRH771 with SMA Male connector, compatible with the walkie-talkie dual band Yaesu, Wouxun and ICOM. This antenna is compatible with all VHF / UHF
The HRI-200 module for C4FM and Yaesu Fusion system connects to the Internet a transceiver as FTM-400 or DR-1XE repeater enable WIRES-X service. The connection between the HRI-200 and the computer is
The spare Yaesu MH-34B4B is a handheld microphone for mobile transceiver Yaesu FT-70 & FT2DE, and FT-60, FT-50, FT-10, FT-40. This reference is no longer manufactured by Yaesu and is replaced by
Resistant fabric case, made in the United States, to carry a walkie-talkie on the belt. Available in 5 different sizes to suit all brands and models of walkie-talkie as for example: Icom, Kenwood,
YAESU SSM-57A Spare Part, Walkie Talkie Headset for Yaesu FT3DE, FT3DR, FT-60E/R, FT-70, FT-1D, FT-2D and VX3. Comes with: Yaesu SSM-57A headset for handheld, Yaesu original part.
Microphone adapter Yaesu CT44 1 pin <> 2 pin for walkie-talkie Yaesu FT-70 & FT2DE, and FT-60, to connect a microphone Yaesu 2 pins. Comes with: 1 Yaesu CT-44 adapter, genuine Yaesu spare.
The new Yaesu FT3DE is a 144/430 MHz dual-band walkie-talkie, analog FM and digital C4FM for Fusion system from Yaesu and Wires-X compatible. The FT3DE is equipped with a broadband receiver, a large
Increase the reception and transmission performance of your 144-430Mhz Yaesu brand walkie-talkie or any walkie-talkie with an SMA female antenna connector on the set. The SRH77CA antenna is with an
Official Yaesu SHC24 soft leahter case for the FT-2DE FT-2DR FT2D walkie-talkie. Delivered with: 1 Yaesu SHC-24, guaranteed original Yaesu part.
The YAESU FBA-39 spare part is a case for rechargeable battery (not included) in order to have a battery with batteries for the portable transceiver Yaesu FT1D, FT2D and FT3D.Compatible for Yaesu
The Yaesu SCU-17 interface is a CAT control system that allows you to control a Yaesu transceiver from a computer and to be able to practice digital communication modes, also called digimodes such as
Microphone with Yaesu SSM-BT10 Bluetooth earpiece, with PTT button, compatible with the FT3, FT3D FT3DE, FT3DR walkie-talkies as well as the Yaesu FTM-300, FTM-300DE, FTM-300D mobile station.Supplied
Be the first to ask a question about this product!
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal