No products
Viewed products
TheIcom IC-718 (new version 2024) is a reliable...
TheIcom IC-718 (new version 2024) is a reliable and affordable HF transceiver, perfect for both novice and experienced radio amateurs. It covers all HF bands from 1.8 to 29.7 MHz, with 100W of power, and offers a simple interface for intuitive use.
Transmit power up to 100W in SSB/CW/RTTY, 35W in AM
General reception from 30 kHz to 29.999 MHz
Modes: USB, LSB, CW, RTTY (FSK), AM
Front speaker for clear listening
Built-in functions : VOX, microphone compressor, IF Shift filter
Backlit LCD display with digital S-meter
101 programmable memories, built-in scanner
Compatible with ICOM AH-730 automatic tuners, MAT TUNER mAT-180H and mAT-K100 (optional)
Supplied with: HM-36 microphone, power cable, French manual.
Frequency ranges :
Transmit (TX): 1.8 to 29.7 MHz (HF amateur bands)
Receive (RX): 30 kHz to 29.999 MHz (general reception)
Modulation modes : USB, LSB, CW, RTTY (FSK), AM
Transmit power :
SSB/CW/RTTY: 2 to 100W
AM: 1 to 35W
Power supply : 13.8V DC ±15%, max. power consumption 20A
Frequency stability : ±200 Hz after 1 min warm-up
Sensitivity (typical) :
SSB/CW/RTTY: 0.16 µV (1.8 to 29.999 MHz)
AM: 13 µV (0.5 to 1.799 MHz), 2 µV (1.8 to 29.999 MHz)
Selectivity :
SSB/CW/RTTY: 2.1 kHz (-6 dB), 4.5 kHz (-60 dB)
AM: 6.0 kHz (-6 dB), 20 kHz (-40 dB)
Image rejection :
70 dB
Built-in loudspeaker : 2W at 8 ohms
Connections:
8-pin microphone socket (600 Ω)
External speaker output (3.5 mm, 8 Ω)
SO-239 antenna connector (50 Ω)
Dimensions : 240 × 95 × 239 mm
Weight : 3.9 kg
Additional functions :
VOX (voice-activated transmission)
Microphone compressor
IF Shift filter for interference reduction
RF attenuator and preamplifier
101 memory channels (99 regular, 2 scan)
Built-in electronic key for CW (6 to 60 words/min)
Digital S/RF display for power and VSWR
Which power supply should I choose for the IC-718?
This set consumes a maximum of 21A at full power at 100W. We recommend a power supply with a minimum of 25A amps, such as the model Nissei NS1230Dor the NS30D for example.
Which aerials should I use with the IC718?
The ideal choice of antenna depends on a number of factors, starting with the type of use (portable, mobile or fixed): The space available, the mounting/installation options and the frequency bands mainly used.
It goes without saying that there is no such thing as a 'magic' antenna, capable of doing everything under any circumstances! You often have to make a choice about the bands covered in transmission, favouring the bands that you prefer and that you plan to tamper with, or accept slightly average performance everywhere.
Here is a selection of recommended antennas for different types of use with the IC-718:
1.Dipole and wire antennas
Dipoles are often the first choice for radio amateurs, as they are simple to build and offer good performance on several bands.
For relatively unobtrusive installation, but provided space is available, wire antennas are a good choice.
- Multiband dipole Diamond BB6WS Well-adjusted to cover several HF bands without the need for an external tuner.
- Inverted V dipole G5RV : A popular wire antenna that covers several HF bands with relatively simple tuning, requires the use of the tuner
- T2FD wideband HF 2-30 Mhz wire antenna DIAMOND WD-330J
2. Vertical antennas
Vertical antennas are recommended for their ease of mounting on a mast and their ability to operate on several bands.
- Diamond CP6SR : Multi-band vertical antenna recognised for the main HF bands (10 to 80 metres).
- Diamond BB7V A wideband vertical antenna that does not require radials and covers many bands without complex adjustments.
3.Directional antennas
If you have the space and want to maximise your DX performance, a directional antenna is ideal.
- Yagi 3 elements: Offers significant gain on HF bands such as 20, 15 and 10 metres, perfect for long-distance contacts.
- Hexbeam: A compact antenna with similar performance to a Yagi, but with fewer installation constraints.
4. Mobile antennas
For mobile use, antennas specially designed for this configuration are required.
- Diamond HV7CX Multi-band antenna for mobile use on several bands without changing settings
- Diamond SD-330 A multi-band mobile antenna with an integrated tuner, designed for rugged performance on the move.
5.Portable antennas
For operators who want to operate in the field (portable), a lightweight, easy-to-carry antenna is essential.
- MC-750 A modular portable antenna that allows the configuration to be adjusted according to band requirements and conditions.
- Chelegance JPC-7 Portable dipole antenna 8 bands HF 40m to 6m : A versatile portable antenna system, ideal for POTA (Parks On The Air) and SOTA (Summits On The Air).
Reference: YAESU-FT991A-HAM-423
The Yaesu FT-991A is the latest revised version, with color waterfall, multi-band and multi-mode display : Analogue HF, 50, 144 and 430 Mhz and Digital C4FM (Yaesu Fusion System), with integrated
Reference: GOODIES-CARNET-LOGBOOK-589
Radio Logbook "Passion Radio" with spirals on A5 landscape format paper, small size perfect for activity in mobile, portable, SOTA or IOTA.Four-color printed cover on a 300 gr satin card Inner
Reference: MESSI-JUMPER-UF7-5UM-UM-1446
Messi & Paoloni coaxial cable ready to use with UHF male connector (PL male), with a diameter of 7mm with M&P ULTRAFLEX 7 cable, very flexible and offering excellent performance with lower
40,90 €
Reference: YAESU-FTDX10-HAM-1086
The Yaesu FTDX10 HF SDR transceiver base station is the latest FTDX / Yaesu SDR to uses the hybrid SDR receiver (narrowband and direct sampling) of the high-end FTDX101 transceiver.The FTDX-10 covers
The Yaesu FT-991A is the latest revised version, with color waterfall, multi-band and multi-mode display : Analogue HF, 50, 144 and 430 Mhz and Digital C4FM (Yaesu Fusion System), with integrated
1 249,17 €tax excl.
Radio Logbook "Passion Radio" with spirals on A5 landscape format paper, small size perfect for activity in mobile, portable, SOTA or IOTA.Four-color printed cover on a 300 gr satin card Inner
3,75 €tax excl.
The Yaesu FTDX10 HF SDR transceiver base station is the latest FTDX / Yaesu SDR to uses the hybrid SDR receiver (narrowband and direct sampling) of the high-end FTDX101 transceiver.The FTDX-10 covers
1 332,50 €tax excl.
Icom IC-705 SDR QRP mobile transceiver station for HF, 50, 144 and 430MHz amateur radio band, with 5W on battery and 10W on external power supply (13.8V), reception from 30Khz to 200Mhz and from 400
1 290,83 €tax excl.
Messi & Paoloni coaxial cable ready to use with UHF male connector (PL male), with a diameter of 7mm with M&P ULTRAFLEX 7 cable, very flexible and offering excellent performance with lower
34,08 €tax excl.
The Signalink USB radio interface from Tigertronics is a USB sound card that allows you to receive and transmit from a computer to practice digital modes such as SSTV, RTTY, Packet, PSK, ROS, FT8,
120,83 €tax excl.
The Signalink SLCAB13I radio interface cable can be used with the Signalink USB sound card and with practically all ICOM radios which have a 13-pin mini-DIN data port (DATA socket). This includes, but
29,08 €tax excl.
The Signalink SLCAB8R radio interface cable can be used with the Signalink USB sound card and with virtually all Alinco, Elecraft, ICOM, Kenwood and Yaesu radios that have an 8-pin micro plug . This
29,08 €tax excl.
The mAT-180H is an automatic antenna tuner operating in the 1.8MHz to 54MHz range, at power levels up to 120 watts. It allows tuning of dipoles, verticals, Yagis, or virtually any coax-fed antenna. It
157,50 €tax excl.
The mAT-K100 is an automatic antenna tuner operating in the 1.8MHz to 54MHz range, at power levels up to 120 watts. It allows tuning of dipoles, verticals, Yagis, or virtually any coax-fed antenna. It
174,17 €tax excl.
The Signalink SLUSB-8R + SLMOD-8RI interface pack is compatible with ICOM radios equipped with an 8-pin micro such as ICOM : IC-707/718/720/725/726, IC-728/729/730/735, IC-736/737/738/740/745,
157,50 €tax excl.
The Yaesu FT-710 AESS HF transceiver is the latest addition to the Yaesu SDR range, it covers all HF amateur radio bands from 160m to 6m with a power of 100W max.Features a large 4.3 inch color touch
1 045,83 €tax excl.
AH-4 ICOM automatic tuner, HF + 50MHz ,120W for IC-7300, IC-707, IC-718, IC-7200, IC-725, IC-7300, IC-7400, IC-7410, IC-7610, IC-756, IC-9100, IC-7000, IC-7100, IC-78. Compatible accessories: AH-2B,
392,82 €tax excl.
ICOM MB-123 carrying handle for IC-7300. Compatible devices: IC-7300, IC-7410, IC-9100, IC-9700, IC-R8600
17,96 €tax excl.
ICOM MB-118 vehicle mounting bracket for IC-7300 and IC-9700.Also compatible for IC-7200, IC-R75 and IC-718.
37,56 €tax excl.
ICOM SM-50 8-pin unidirectional table microphone for IC-7300 for example, see list of compatible devices below*. * Requires OPC-589 adapter for RJ45 > 8-pin microphone socket for transceivers with
229,17 €tax excl.
ICOM SM-30 8-pin unidirectional table microphone for IC-7300 for example, see list of compatible devices below*. * Requires OPC-589 adapter for RJ45 > 8-pin microphone socket for transceivers with
174,17 €tax excl.
ICOM HM-219 8 pin speaker microphone for IC-7300. Compatible devices: IC-7300, IC-718, IC-7610, IC-7700, IC-9100, IC-9700, IC-7100 (requires 8-pin microphone plug adapter)
35,00 €tax excl.
Table microphone with 8-pin metal connector ICOM SM-27 for IC-7300 Compatible ICOM devices: IC-7300, IC-7200, IC-718, IC-7410, IC-7600, IC-7700, IC-7800, IC-9100, IC-78.
133,33 €tax excl.
Yaesu DC 12V power cable T9025225 compatible with Yaesu FT710, FTdx10, FT991a, FT450d/at, FT950, FT2000, FT891 and FTdx101d. This cable is also compatible with the Icom IC-7300, IC-7610 and IC-9100
20,83 €tax excl.
ICOM AH-730 automatic tuner for HF bands from 1.8 to 54MHz (160m to 6m), 150W (PEP) and 100W (continuous), for ICOM transceivers IC-7300IC-707, IC-718, IC-7200, IC-725, IC-7400, IC-7410, IC-7610,
415,00 €tax excl.
The Yaesu FT-710 FIELD is the version without external loudspeaker and with a shoulder strap, of the new HF transceiver of the Yaesu SDR range, it covers all HF amateur radio bands from 160m to 6m
999,17 €tax excl.
Service only available on explicit request from the customer for frequency modification of a YAESU or ICOM HF mobile or HF decametric transceiver. Requests to open up frequencies (debriding in the
25,00 €tax excl.
Digirig is an integrated USB interface for digital amateur radio modes (FT8, SSTV, RTTY, CW, VARA, etc.) combining an audio codec, a CAT serial interface and PTT control. All you need is a simple USB
57,50 €tax excl.
Digirig Mobile 1.6+ cables for ICOM transceivers: IC-7000, IC-703, ICOM IC-706, ICOM IC-706MKII, IC-706MKIIG, IC-7100, IC-718, IC-7200, IC-7300, IC-7410, IC-78, IC-9100, IC-970A, IC-970E, IC-970H.
31,58 €tax excl.
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal
Copyright 2014-2025 - Passion Radio / 4 MY PEOPLE.
Les photos et coloris ne sont pas contractuels.