Viewed products
Auxiliary USB-A cable for the digirig DR-891...
DIGIRIG-ACC891-3001
New product
U.S.A
Softcomplex Inc. (Digirig), PO BOX 2451 Grand Junction, CO 81502, USA, Tel. +1 970.462.7080, email : contact@digirig.net
Passion Radio, 117 rue de Charenton, 75012 Paris - France, Tel. +33(0)7.66.54.74.11, mail : support@passion-radio.com
Online only
Auxiliary USB-A cable for the digirig DR-891 with GPS receiver for geolocation and time synchronisation of the Yaesu FT-891.
Using the GPS receiver to synchronise the time
When plugged in (either directly into the computer's USB-A socket or via the DR-891 with an auxiliary lead), the GPS dongle creates a serial port on the computer.
Go to the device manager to determine the COM port number. The entry for the GPS receiver will have the description "USB Serial Device" with VID/PID 0x1546/0x01A7.
The red LED indicates that the dongle is powered. Periodic flashing of the green LED indicates a successful GPS lock. If there is no lock after several minutes, try moving to an area with clear skies.
Download, install and configure software that will use GPS signals for time synchronisation. The dongle in this kit has been successfully tested with the free application BktTimeSync on Windows. Microsoft Defender may object to the installation, which you should ignore to continue.
When the application starts, select the serial port from the list that corresponds to the entry in the Device Manager. Uncheck the Enable NTP option and check the Enable GPS option to synchronise the time in disconnected mode. All other settings can remain unchanged.
Note that the application displays the WW locator based on the coordinates, so you don't have to look them up when configuring the ham radio application. There is also an option to send it to WSJT-X directly from the application.
Reference: AUTOCOLLANT-HAM-S-487
Sticker of the international amateur radio symbol (hamradio ) that represents an antenna connected to a solenoid then to the earth and shows the link in the radio between the Earth and the Air.
Reference: RFKONNECT-PINCE-81T638-2238
170 Diagonal pliers with shiny blue handle High-quality, portable industrial levelling pliers for PLATOIncluded in the package:- 1 x Diagonal pliers
4,92 €
Reference: DIGIRIG-YAESUDIN5-2934
Digirig Mobile 1.6+ cables for Yaesu transceivers using DIN5 and DB9 connectors.Coiled cables keep things tidy by avoiding knots and kinks. one DIN5 audio/PTT cable and one DB9 serial RS-232 CAT
Reference: DIGIRIG-TS450MOBILE-2938
Digirig Mobile 1.6+ cables for Kenwood transceivers using 13-pin and 6-pin DIN connectors.coiled cable keeps things tidy by avoiding knots and kinks RS-232 serial cable for CAT with Din-6 connector
Reference: YAESU-FT-891-HAM-461
The new FT-891 is the most compact HF 100W transceiver in the Yaesu range, suitable for both fixed and mobile applications.It covers all HF amateur bands from 160 to 10m with also 6m band (50 MHz)
Reference: YAESU-FC40-478
Automatic antenna tuner Yaesu FC-40 for transceivers of series : FT-450, FT-857, FT-897, FT-857D, FT-891, FT-991A, FTDX-3000, FTDX-101D, FTDX-10 et FT-710.The FC-40 automatic tuner is designed to be
Reference: YAESU-FC50-479
This Yaesu FC-50 automatic antenna tuner is specially designed for the FT-891 and for indoors, deskop or mobile used.The FC-50 automatic tuner antenna operates from 1.8-29Mhz and 50-54 MHz with a
Reference: YAESU-ATAS-25-1291
Yaesu ATAS-25 portable antenna with manual synchronization from 7Mhz to 430Mhz, compatible with Yaesu FT-818ND, FT-891, FT-991A radios. Designed to be mounted on a standard camera tripod (1/4 "stud),
Click here to leave a review
Be the first to ask a question about this product!
The new FT-891 is the most compact HF 100W transceiver in the Yaesu range, suitable for both fixed and mobile applications.It covers all HF amateur bands from 160 to 10m with also 6m band (50 MHz)
657,50 €tax excl.
Automatic antenna tuner Yaesu FC-40 for transceivers of series : FT-450, FT-857, FT-897, FT-857D, FT-891, FT-991A, FTDX-3000, FTDX-101D, FTDX-10 et FT-710.The FC-40 automatic tuner is designed to be
237,50 €tax excl.
This Yaesu FC-50 automatic antenna tuner is specially designed for the FT-891 and for indoors, deskop or mobile used.The FC-50 automatic tuner antenna operates from 1.8-29Mhz and 50-54 MHz with a
240,83 €tax excl.
Yaesu ATAS-25 portable antenna with manual synchronization from 7Mhz to 430Mhz, compatible with Yaesu FT-818ND, FT-891, FT-991A radios. Designed to be mounted on a standard camera tripod (1/4 "stud),
205,83 €tax excl.
Yaesu MMB-82 mounting bracket for mobile transceivers, compatible with Yaesu FT-891 station.
4,92 €tax excl.
Yaesu YSK-891 separation kit, compatible with Yaesu FT-891 sets.
40,00 €tax excl.
This version of the Digirig CAT, audio and PTT control interface is dedicated specifically to the Yaesu FT-891, but can be used with other models of transceivers if only the audio/PTT cable is
82,50 €tax excl.
Separate MiniDin6 (1200 baud audio + PTT) and MiniDin8 (CAT control) coiled cables. Compatible with : Alinco DR-735E, DR-735T ICOM IC-207, IC-207H, IC-208H, IC-2720H, IC-2800, IC-2820, IC-7000,
31,58 €tax excl.
Shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal
Copyright 2014-2025 - Passion Radio / 4 MY PEOPLE.
Les photos et coloris ne sont pas contractuels.