No products
New products
-
Anytone AT-5100 Transceiver Mobile 10m HF SSB AM FM CW 35W NRC
172,77 € tax excl. -
-
-
Viewed products
-
SenseCAP Solar Node...
The SenseCAP Solar Node P1-Pro from Seeed...
-
SIRIO SPO 1090 MHz ADSB antenna
55,95 € -3% 57,68 €
View larger 
SenseCAP Solar Node P1-Pro LoRa MeshCore Solar Repeater Node nRF52840 SX1262 GPS Seeed Studio
No review at the momentThe SenseCAP Solar Node P1-Pro from Seeed Studio is a self-contained, solar-powered node pre-flashed with MeshCore firmware. Designed to create or extend decentralised, off-grid LoRa mesh networks, it features an ultra-low-power XIAO nRF52840 microcontroller, a Wio-SX1262 LoRa chip and a high-precision L76K GPS module.
- Pre-flashed with ready-to-use MeshCore repeater firmware
- Self-powered via an integrated solar panel and intelligent power management
- nRF52840 architecture for ultra-low power consumption
- High-sensitivity, long-range SX1262 LoRa transceiver
- Precise positioning thanks to the integrated L76K GPS module
- Waterproof housing designed for permanent outdoor installation
Supplied with: 1x SenseCAP Solar Node P1-Pro, 1x external LoRa antenna, 1x pole/wall mounting kit, 1x quick start guide.
Download
Data sheet
The SenseCAP Solar Node P1-Pro is a standalone LoRa repeater and node designed for the rapid deployment of off-grid MeshCore mesh networks. Designed for amateur radio operators, IoT enthusiasts and professionals seeking a resilient, decentralised communications infrastructure, it guarantees complete autonomy thanks to its integrated solar power supply and ultra-low-power nRF52 architecture.
Key features
- Total energy autonomy: Integrated solar panel combined with advanced nRF52 power management for uninterrupted 24/7 outdoor operation.
- MeshCore out-of-the-box: Supplied pre-flashed with MeshCore firmware, enabling immediate integration into the mesh ecosystem without complex configuration.
- Maximum LoRa range: Equipped with the modern Semtech SX1262 chipset, offering excellent link performance and superior RF sensitivity.
- Integrated geolocation: Built-in L76K GNSS module for precise position tracking and time synchronisation across the network.
- Robust outdoor design: Sealed, weatherproof housing suitable for deployment on rooftops, masts or in remote locations.
Technical specifications
- Microcontroller: Seeed XIAO nRF52840 Plus (32-bit ARM Cortex-M4F @ 64 MHz, Bluetooth 5.0)
- LoRa module: Wio-SX1262 (Semtech SX1262)
- GPS module: Quectel L76K (high sensitivity)
- Pre-installed firmware: MeshCore Repeater Firmware
- Power supply: Integrated solar panel with charging circuit for LiPo/LiFePO4 battery
- Power management: Ultra-low power consumption in standby mode (nRF52 Deep Sleep)
- RF connectivity: Optimised external antenna connector
- Housing: UV-resistant and waterproof outer casing
Compatibility
- MeshCore ecosystem: Compatible with all MeshCore nodes, routers and mobile apps.
- LoRa mesh networks: Interoperable with decentralised, off-grid communication networks.
- Mobile devices: Direct connection and configuration via Bluetooth Low Energy (BLE) from a smartphone or tablet.
FAQ
Does the SenseCAP Solar Node P1-Pro require an external power source?
No, thanks to its integrated solar panel and internal battery with ultra-low-power standby management, it operates 100% autonomously once exposed to daylight.
Is it ready to use straight out of the box?
Yes, the device comes pre-loaded with the MeshCore repeater firmware. Simply attach the antenna, switch on the module and configure it via the dedicated mobile app using Bluetooth.
Can it be installed outdoors all year round?
Absolutely. Its waterproof casing is specifically designed to withstand the elements, rain and UV rays, whether mounted on a mast or on a roof.
What is the radio range of this solar node?
Thanks to the high-performance Semtech SX1262 receiver and the external antenna, the range can reach several kilometres in urban areas and several tens of kilometres in line of sight (LOS).
Can the firmware be updated or modified?
Yes, the open architecture based on the XIAO nRF52840 microcontroller allows software updates via USB or OTA, depending on the features provided by the MeshCore or Meshtastic communities.
Customers also bought
No products availableWe also recommend
11,52 €Reference: PIGTAIL-RP-SMA-F-N-M-451
Pigtail RP-SMA Female to N Male 15cm RG316
Pigtail adapter RP-SMA (Reverse SMA) Female to N plug Male. RG 316 50 ohm coaxial cable, 15cm long.
11,52 €In stock
11,10 €Reference: PIGTAIL-RP-SMA-F-N-F-452
Pigtail RP-SMA Female to N Female RG316
RP-SMA (Reverse SMA) Female to N Female pigtail adapter. 50 ohms.
11,10 €In stock
30,00 €Reference: FILTRE-SAW2-868-F1OPA-830
Bandpass SAW Filter 868 Mhz for Helium LoRa Meshtastic Lorawan SigFox Zigbee
This filter for the 868 MHz bandpass allows to improve the selectivity of the reception and to suppress the parasitic signals outside the 868MHz band and in particular to reject the GSM 900 MHz
30,00 €Online onlyIn stock
6,10 €Reference: ADAPT-RP-SMA-M-N-F-1543
RP-SMA Male - N Female Adapter
This RF adapter converts an RP-SMA Male connector to an N Female connector.Terminal 1 connector: RP-SMA male Connector end 2: N female Impedance: 50 Ohms Nickel plated Frequency: 0 to 6 GHzPlease
6,10 €In stock
Reviews
Additional or similar equipment
-
Pigtail RP-SMA Female to N Male 15cm RG316
Pigtail adapter RP-SMA (Reverse SMA) Female to N plug Male. RG 316 50 ohm coaxial cable, 15cm long.
11,52 € tax incl.In stock9,60 €tax excl.
-
Pigtail RP-SMA Female to N Female RG316
RP-SMA (Reverse SMA) Female to N Female pigtail adapter. 50 ohms.
11,10 € tax incl.In stock9,25 €tax excl.
-
Bandpass SAW Filter 868 Mhz for Helium LoRa Meshtastic Lorawan SigFox Zigbee
This filter for the 868 MHz bandpass allows to improve the selectivity of the reception and to suppress the parasitic signals outside the 868MHz band and in particular to reject the GSM 900 MHz
30,00 € tax incl.In stock25,00 €tax excl.
-
RP-SMA Male - N Female Adapter
This RF adapter converts an RP-SMA Male connector to an N Female connector.Terminal 1 connector: RP-SMA male Connector end 2: N female Impedance: 50 Ohms Nickel plated Frequency: 0 to 6 GHzPlease
6,10 € tax incl.In stock5,08 €tax excl.
RP-SMA Male to N Male adapter
This RF adapter converts an RP-SMA Male connector to an N Male connector. Note that this adapter is a Reverse SMA, mainly used for WIFI hotspots, for example.End 1 connector: RP-SMA male End 2
6,10 € tax incl.In stock5,08 €tax excl.
Angled adapter RP-SMA Male to RP-SMA Female (reverse SMA)
Angled RF adaptor, connector RP-SMA male(inverted SMA male) to RP-SMA female(inverted SMA female). Impedance 50 ohms. WarningThis adapter is a reverse SMA (RP-SMA), mainly used for 2.4Ghz WIFI
5,04 € tax incl.In stock4,20 €tax excl.
Elecrow ThinkNode M6 Meshtastic Outdoor Solar Node nRF52840 SX1262 GPS IP65
The ThinkNode M6 is a rugged Meshtastic node designed for the most demanding outdoor and industrial environments. With its built-in 6W solar panel and nRF52840 processor, it enables the deployment of
59,46 € tax incl.Out of stock, available within 1 month49,55 €tax excl.
61,30 € -3%SenseCAP T1000-E GPS Tracker with LoRa, Meshtastic and Bluetooth, nRF52840, Seee
The SenseCAP T1000-E from Seeed Studio is a credit-card-sized GPS tracker withMeshtastic firmwarepre-installed, which is also compatible with Meshcore. It enables off-grid communication, location
49,00 € tax incl.Out of stock, available in 1 month’s time40,83 €tax excl.
SenseCAP Solar Node P1 LoRa Meshtastic 868 MHz Solar Repeater Node by Seeed Stud
The SenseCAP Solar Node P1 from Seeed Studio is a self-contained, solar-powered node or repeater designed for the Meshtastic or Meshcore LoRa mesh network (EU868 version). It allows you to easily
83,29 € tax incl.Out of stock, available in 1 month’s time69,41 €tax excl.
Wio Tracker L1 Pro Meshtastic LoRa 868 MHz nRF52840 GPS OLED Seeed Studio Node
The Wio Tracker L1 Pro from Seeed Studio is a fully-fledged standalone device designed for decentralised Meshtastic mesh networks. It combines a Nordic nRF52840 ultra-low-power processor, an 868 MHz
55,52 € tax incl.Out of stock, available in 1 month’s time46,27 €tax excl.
RP-SMA Male to N Female Pigtail Cable, 30cm, RG316, LoRa Wi-Fi Meshcore Pigtail
The 30 cm RG316 coaxial RF pigtail cable from Seeed Studio allows you to easily adapt a male RP-SMA connector to a female N-type bulkhead connector. It is designed to connect your radio equipment,
6,98 € tax incl.Out of stock, available in 1 month’s time5,82 €tax excl.
See more equipment
Europe & Overseas
Shipped from France
Product return
14 days to return, 2 warranty
Email support
Response within 24h to 72h
Secure payment
SSL, VISA, Mastercard, Paypal
Copyright 2014-2026 - Passion Radio / 4 MY PEOPLE
Les photos et coloris ne sont pas contractuels.