No products
New products
-
Anytone AT-5100 Transceiver Mobile 10m HF SSB AM FM CW 35W NRC
172,77 € tax excl. -
-
-
Viewed products
-
SenseCAP Solar Node P1...
The SenseCAP Solar Node P1 from Seeed Studio is...
-
SIRIO SPO 1090 MHz ADSB antenna
55,95 € -3% 57,68 €
View larger 
SenseCAP Solar Node P1 LoRa Meshtastic 868 MHz Solar Repeater Node by Seeed Studio
No review at the momentThe SenseCAP Solar Node P1 from Seeed Studio is a self-contained, solar-powered node or repeater designed for the Meshtastic or Meshcore LoRa mesh network (EU868 version). It allows you to easily maintain and extend your decentralised, off-grid communications without relying on a mobile network or the internet.
- Self-powered via an integrated solar panel with intelligent charge management
- Optimised design for outdoor use as a fixed relay/repeater or local node
- Natively compatible with the pre-installed open-source Meshtastic protocol
- Robust, weatherproof housing suitable for harsh weather conditions
- Compartment for 18650 rechargeable batteries (not supplied)
- An ideal, cost-effective solution for large-scale mesh network deployment
Supplied with: 1x SenseCAP Solar Node P1 enclosure with integrated solar panel, 1x 868 MHz LoRa antenna, 1x mounting kit for pole and wall, 1x quick start guide.
Download
Data sheet
- Complete energy self-sufficiency: Integrated solar panel combined with ultra-low-power energy management for 24/7 operation.
- Meshtastic-ready: Pre-flashed and optimised out of the box for instant integration into a LoRa mesh network without the need for infrastructure.
- Compact all-in-one design: Incorporates the solar panel, IP-rated waterproof casing and control electronics without complex wiring.
- Unbeatable value for money: A streamlined version without an internal GPS module to reduce costs and energy consumption on fixed relays.
- Easy installation: Supplied with all the necessary accessories for quick mounting on a mast, post or building façade.
Technical specifications
- Manufacturer: Seeed Studio
- Model: SenseCAP Solar Node P1 (Ref. 114993643)
- LoRa frequency: 868 MHz (European ISM band / CE)
- Supported protocol: Meshtastic (pre-installed / configurable firmware)
- Connectivity: LoRa, Bluetooth LE (for configuration via smartphone app)
- Power supply: Integrated solar panel + internal charging circuit
- Compatible battery type: Slot for 4 x 18650 Li-ion batteries (not included)
- Housing: UV-resistant, waterproof material for outdoor use
- Antenna: Optimised 868 MHz external LoRa antenna supplied (waterproof SMA connector)
- Dimensions: Suitable for discreet outdoor installation
Compatibility
- Applications: Meshtastic or Meshcore mobile app (iOS and Android), Meshtastic or Meshcore Web Flasher, HTTP/Bluetooth web client.
- Networks: Compatible with all Meshtastic LoRa nodes and routers operating at 868 MHz (Heltec, T-Beam, Station G2, etc.).
- Accessories and power supply: Compatible with standard 18650 rechargeable batteries (flat-top or unprotected top recommended, depending on polarity).
- Mounting: Compatible with standard-diameter tubular masts and universal wall brackets.
FAQ
What is the difference between the SenseCAP Solar Node P1 and the P1-Pro version?
The standard P1 model is a budget version: it does not feature an internal GPS chip and is sold without 18650 batteries, making it a perfect and more affordable choice for fixed repeaters whose geographical location is known and fixed.
What batteries should be used to power it?
The unit requires rechargeable 18650 Li-ion batteries to store solar energy and ensure operation at night or in cloudy conditions.
How do you carry out the initial setup?
Set-up is carried out simply via Bluetooth using the official Meshtastic mobile app on your Android smartphone or iPhone.
Can the device operate in continuous rain?
Yes, the unit and the antenna connectors are specifically designed to withstand outdoor weather conditions (rain, wind, direct sunlight).
Can the original antenna be replaced with a higher-gain antenna?
You can connect a high-gain 868 MHz directional or omnidirectional external antenna using the female RP-SMA connector.
Customers also bought
No products availableWe also recommend
4,70 €Reference: ADAPT-RP-SMA-M-SMA-F-290
RP-SMA Male to SMA Female adapter (WIFI and Helium hotspot compatible)
This RF adapter converts an RP-SMA Male connector to an SMA Female connector. Please note that this adapter is a Reverse SMA, mainly used for WIFI equipment. Also compatible with hotspot equipment for
4,70 €4,70 €
In stock
30,00 €Reference: FILTRE-SAW2-868-F1OPA-830
Bandpass SAW Filter 868 Mhz for Helium LoRa Meshtastic Lorawan SigFox Zigbee
This filter for the 868 MHz bandpass allows to improve the selectivity of the reception and to suppress the parasitic signals outside the 868MHz band and in particular to reject the GSM 900 MHz
30,00 €Online onlyIn stock
114,46 € 118,00 € tax excl. -3%tax excl. In stock-3%
Reference: DIAMOND-X300-V1-UHF-955
Antenna DIAMOND X300 VHF UHF 144/430Mhz
Diamond X300 antenna for fixed use on VHF UHF bands of 144/430 MHz with SO239 connector (female UHF) or N female to choose, and with 3 radians.Antenna type: 2x 5/8 wave (144MHz) and 5x 5/8 wave
114,46 €118,00 €
Reduced price!In stock
7,10 €Reference: COAX-RG402-RP-SMAM-SMAF-10CM-994
RG402 low-loss rigid coaxial connector RP-SMA Male - SMA Female
This very low-loss rigid RG402 coaxial connector, 10cm, 15cm or 20cm long, can be used to convert an RP-SMA Male connector to an SMA Female connector. WarningThis adapter is a Reverse SMA (RP-SMA),
7,10 €7,10 €
In stock
Reviews
Additional or similar equipment
-
RP-SMA Male to SMA Female adapter (WIFI and Helium hotspot compatible)
This RF adapter converts an RP-SMA Male connector to an SMA Female connector. Please note that this adapter is a Reverse SMA, mainly used for WIFI equipment. Also compatible with hotspot equipment for
4,70 € tax incl.In stock3,92 €tax excl.
-
Bandpass SAW Filter 868 Mhz for Helium LoRa Meshtastic Lorawan SigFox Zigbee
This filter for the 868 MHz bandpass allows to improve the selectivity of the reception and to suppress the parasitic signals outside the 868MHz band and in particular to reject the GSM 900 MHz
30,00 € tax incl.In stock25,00 €tax excl.
-
Antenna DIAMOND X300 VHF UHF 144/430Mhz
Diamond X300 antenna for fixed use on VHF UHF bands of 144/430 MHz with SO239 connector (female UHF) or N female to choose, and with 3 radians.Antenna type: 2x 5/8 wave (144MHz) and 5x 5/8 wave
114,46 € tax incl.In stock95,38 €tax excl.
118,00 € -3% -
RG402 low-loss rigid coaxial connector RP-SMA Male - SMA Female
This very low-loss rigid RG402 coaxial connector, 10cm, 15cm or 20cm long, can be used to convert an RP-SMA Male connector to an SMA Female connector. WarningThis adapter is a Reverse SMA (RP-SMA),
7,10 € tax incl.In stock5,92 €tax excl.
RP-SMA Male - N Female Adapter
This RF adapter converts an RP-SMA Male connector to an N Female connector.Terminal 1 connector: RP-SMA male Connector end 2: N female Impedance: 50 Ohms Nickel plated Frequency: 0 to 6 GHzPlease
6,10 € tax incl.In stock5,08 €tax excl.
868 MHz 4.4dBi tuned antenna for ISM 868 LoRa Helium Meshtastic network
This antenna is specially designed to improve the performance of ISB band 868 MHz devices (LoraWAN, Meshtastic, Meshcore).It is tuned for 868 MHz frequencies, with a SWR of less than 1.2, which allows
69,00 € tax incl.Out of stock, available in 3 to 4 weeks57,50 €tax excl.
Angled adapter RP-SMA Male to RP-SMA Female (reverse SMA)
Angled RF adaptor, connector RP-SMA male(inverted SMA male) to RP-SMA female(inverted SMA female). Impedance 50 ohms. WarningThis adapter is a reverse SMA (RP-SMA), mainly used for 2.4Ghz WIFI
5,04 € tax incl.In stock4,20 €tax excl.
TTGO T-BEAM SUPREME SX1262 Meshtastic 868 MHz Lora WiFi BT5 GPS
Evolution of the T-BEAM SUPREME board with Meshtastic firmware installed, IoT development board for the LoRa 868 MHz ISM band, with 802.11 b/g/n WIFI connection , Bluetooth/BLE 5, 2.4cm soldered OLED
67,43 € tax incl.Out of stock, available within 1 month56,20 €tax excl.
69,52 € -3%PNI DYN300 Survival Radio FM/AM/SW Dynamo Solar Powerbank 4000mAh SOS IPX3
The PNI DYN300 is a multifunctional portable radio designed for outdoor adventure, camping, and emergency situations. It integrates four power modes to ensure constant reception of FM, AM, and
34,57 € tax incl.In stock28,81 €tax excl.
35,64 € -3%Elecrow ThinkNode M6 Meshtastic Outdoor Solar Node nRF52840 SX1262 GPS IP65
The ThinkNode M6 is a rugged Meshtastic node designed for the most demanding outdoor and industrial environments. With its built-in 6W solar panel and nRF52840 processor, it enables the deployment of
59,46 € tax incl.Out of stock, available within 1 month49,55 €tax excl.
61,30 € -3%
Elecrow 868/915 MHz LoRa Antenna, SMA Male, Directional, Foldable Paddle
This high-performance directional antenna is specifically designed for long-range LoRa communications in the 868 MHz and 915 MHz bands. Its unique foldable 'paddle' design allows for precise alignment
6,69 € tax incl.In stock5,58 €tax excl.
6,90 € -3%
Low-loss coaxial cable extension, RP-SMA male angled – N female KSR195
25 cm low-loss 50 ohm coaxial cable extension made from KSR195, for use from 0 to 6 GHz, with a right-angle RP-SMA connector and a straight female N connector.Connector 1: Angled RP-SMA male
10,80 € tax incl.In stock9,00 €tax excl.
Low-loss coaxial cable extension, RP-SMA male to N female, KSR195
25 cm low-loss 50 ohm coaxial cable extension made from KSR195, for use from 0 to 6 GHz, with an RP-SMA connector and a straight female N connector.Connector 1: RP-SMA male Connector 2: Female N
9,84 € tax incl.In stock8,20 €tax excl.
ThinkNode M9 Standalone LoRa MeshCore Communication Terminal with Physical Keybo
The Elecrow ThinkNode M9 is a standalone, decentralized LoRa MeshCore communication device in a compact smartphone form factor. Equipped with a full physical keyboard and a 2.4-inch color screen, it
86,72 € tax incl.Out of stock, available within 1 month72,27 €tax excl.
89,40 € -3%SenseCAP T1000-E GPS Tracker with LoRa, Meshtastic and Bluetooth, nRF52840, Seee
The SenseCAP T1000-E from Seeed Studio is a credit-card-sized GPS tracker withMeshtastic firmwarepre-installed, which is also compatible with Meshcore. It enables off-grid communication, location
49,00 € tax incl.Out of stock, available in 1 month’s time40,83 €tax excl.
SenseCAP Solar Node P1-Pro LoRa MeshCore Solar Repeater Node nRF52840 SX1262 GPS
The SenseCAP Solar Node P1-Pro from Seeed Studio is a self-contained, solar-powered node pre-flashed with MeshCore firmware. Designed to create or extend decentralised, off-grid LoRa mesh networks, it
106,16 € tax incl.Out of stock, available in 1 month’s time88,47 €tax excl.
Wio Tracker L1 Pro Meshtastic LoRa 868 MHz nRF52840 GPS OLED Seeed Studio Node
The Wio Tracker L1 Pro from Seeed Studio is a fully-fledged standalone device designed for decentralised Meshtastic mesh networks. It combines a Nordic nRF52840 ultra-low-power processor, an 868 MHz
55,52 € tax incl.Out of stock, available in 1 month’s time46,27 €tax excl.
RP-SMA Male to N Female Pigtail Cable, 30cm, RG316, LoRa Wi-Fi Meshcore Pigtail
The 30 cm RG316 coaxial RF pigtail cable from Seeed Studio allows you to easily adapt a male RP-SMA connector to a female N-type bulkhead connector. It is designed to connect your radio equipment,
6,98 € tax incl.Out of stock, available in 1 month’s time5,82 €tax excl.
Seeed XIAO nRF52840 & Wio-SX1262 Meshtastic Meshcore LoRa 868MHz Bluetooth BLE 5
The Seeed Studio XIAO nRF52840 & Wio-SX1262 kit is an ultra-compact, ultra-low-power solution designed specifically for creating decentralised Meshtastic Meshcore communication nodes and
17,96 € tax incl.Out of stock, available in 1 month’s time14,97 €tax excl.
See more equipment
Europe & Overseas
Shipped from France
Product return
14 days to return, 2 warranty
Email support
Response within 24h to 72h
Secure payment
SSL, VISA, Mastercard, Paypal
Copyright 2014-2026 - Passion Radio / 4 MY PEOPLE
Les photos et coloris ne sont pas contractuels.