No products
New products
-
Diamond HF12FX HF 24 MHz Mobile Antenna (12m)
55,00 € tax excl. -
Chelegance 4.8m telescopic mast for MC-599 and JPC-7 antennas
82,50 € tax excl. -
Chelegance XPG VHF and UHF 80W discrete magnetic antenna + 3.5m cable
20,75 € tax excl. -
Hytera HR655 handheld FM & DMR VHF or UHF relay 25W IP54 or 10W IP67
1 165,83 € tax excl.
Viewed products
-
Raspberry Pi 3 B and...
The Raspberry Pi 3 model B+ has a Quad Core...
-
Yaesu CT-168 cloning cable compatible FT3DE / R FT-2DE FT-1DE
19,80 € -10% 22,00 €
Raspberry Pi 3 B and B+ PLUS Quad Core WiFi Bluetooth 1GO HDMI FullHD Rpitx
No review at the momentThe Raspberry Pi 3 model B+ has a Quad Core processor, WiFi and Bluetooth Low Energy (BLE), making it even easier to develop RF radio and IoT applications.
- 1 GB RAM memory
- 802.11 Wi-Fi
- Bluetooth Low Energy
- 40-pin GPIO
- 4 USB 2.0 ports
- Stereo output (3.5mm jack) and composite video port
- HDMI FullHD socket - VideoCore IV 3D GPU
- RJ45 socket
- Camera port, DSI display port for connecting a touch screen
- Player Micro SD for operating system and data storage (max 64GB)
- Power supply via micro-USB cable (not included, available as an option)
Officially supported operating systems for download at Raspberrypi.org : Raspbian, Windows 10 Core IoT, OpenELEC, OSMC, Arch Linux, RISC OS, Pidora.
Delivered with : Raspberry Pi 3 Model B or B+ board, choose below.
Data sheet
The differences between the Raspberry Pi 3 B and B+
Raspberry Pi 3 B version
- Quad-Core 1.2 GHz ARM Cortex-A53 CPU
- WiFi 802.11 b/g/n (2.4GHz)
- LAN RJ45 10/100 Mbit/s
- Bluetooth Low Energy 4.1
Raspberry Pi 3 B+ (plus) version
- CPU Quad Core Broadcom BCM2837B0, Cortex-A53 64-bit 1.4GHz
- WiFi 802.11 b/g/n/ac (2.4GHz and 5GHz)
- RJ45 10/100/1000 Mbps LAN (Gigabit LAN USB 2.0 up to 300 Mbps) Power over Ethernet (PoE) compatible with PoE expansion card (optional)
- Bluetooth Low Energy 4.2
Use a Raspberry PI as a radio transmitter with Rpitx
Thanks to the Rpitx software from F5OEO software, it is possible to use a Raspberry PI to transmit radio signals from 5khz to 500MHz (AM/FM/SSB/FSQ/SSTV), using the GPIO 18 extension (pin 12) to connect a wire that will act as an antenna. The length of the wire will depend on the frequency used for transmission.
Note, however, that the signal generated is not clean and generates numerous harmonics which could be harmful if amplified without filtering.
With the addition of an RTL-SDR stick for reception, it is now possible, for experimental purposes, to create a transceiver using the qtcsdr software from HA7ILM.
As with all radio transmission equipment, use is subject to compliance by the user with the laws in force in the country of use.
Customers also bought
4,45 € 8,90 € tax excl. -50%tax excl. Out of stock, available within 6-12 months-50%
Reference: BOITIER-RASPBERRY-NOIR-524
Case for Raspberry Pi 1, 2 & 3 Model B/B+
Case for Raspberry Pi, with removable and transparent cover, designed to house the Raspberry Pi 3 model B/B+, Raspberry Pi 2 model B & Raspberry Pi 1 model B+.The case has space for most HATs and
4,45 €8,90 €
Reduced price!
4,45 € 8,90 € tax excl. -50%tax excl. Out of stock, available within 6-12 months-50%
Reference: BOITIER-RASPBERRY-BLANC-70
Officiel case for Raspberry Pi 3 Model B & B+
Official case for Raspberry Pi 3, with removable lid and removable GPIO for easy access to the 40-pin GPIO port. Compatible with Raspberry Pi 3 Model B and B+ (Plus). Dimensions: 96x70x25mm
4,45 €8,90 €
Reduced price!
9,90 €Reference: PIGTAIL-RP-SMA-F-N-F-452
Pigtail RP-SMA Female to N Female RG316
RP-SMA (Reverse SMA) Female to N Female pigtail adapter. 50 ohms.
9,90 €
79,00 €Reference: DIAMOND-X50-SO239-819
DIAMOND X50 & X-50N Antenna 144/430Mhz
Dual-band Diamond antenna X50 144/430MHz (2m/70cm). Type:6/8 wave (144MHz), 3x 5/8 wave C-Load radialless (430MHz)Length: 1.7mWeight: 0.9kg Gain: 4.5dB (144MHz), 7.2dBi (430MHz) Max.power:
79,00 €
We also recommend
1,95 €Reference: CABLE-MICRO-USB-BLANC-0451
USB to micro-USB power cable (Samsung)
This USB to micro USB cable measures 1 metre and can be used as a power cable for BlueDV, Raspberry Pi board, Samsung S3, S4, S5 mobile phone or any device with a micro-USB power port. Available in
1,95 €- 4,45 € 8,90 € tax excl. -50%tax excl. Out of stock, available within 6-12 months
-50%
Reference: BOITIER-RASPBERRY-BLANC-70
Officiel case for Raspberry Pi 3 Model B & B+
Official case for Raspberry Pi 3, with removable lid and removable GPIO for easy access to the 40-pin GPIO port. Compatible with Raspberry Pi 3 Model B and B+ (Plus). Dimensions: 96x70x25mm
4,45 €8,90 €
Reduced price! 
95,00 €Reference: DVMEGA-SINGLEBAND-331
DV MEGA board singleband UHF D-Star DMR C4FM
DVMEGA RPI UHF is a radio module, digital transceiver, in GMSK mode, singleband for 430 to 450Mhz and designed to work with a Raspberry Pi card (not included), for digital mobile radio D-Star, DMR and
95,00 €
149,00 €Reference: DVMEGA-DUALBAND-332
DV MEGA dual-band VHF-UHF D-Star DMR C4FM
The radio module DVMEGA VHF & UHF, designed to work with a Raspberry Pi card (not included) or Bluestack Micro+ (not included), to make it a digital hotspot in GMSK mode for 144 to 148 Mhz and 430
149,00 €
Reviews
Additional or similar equipment
-
USB to micro-USB power cable (Samsung)
This USB to micro USB cable measures 1 metre and can be used as a power cable for BlueDV, Raspberry Pi board, Samsung S3, S4, S5 mobile phone or any device with a micro-USB power port. Available in
1,95 € tax incl.Out of stock, available within 1 month1,63 €tax excl.
-
Officiel case for Raspberry Pi 3 Model B & B+
Official case for Raspberry Pi 3, with removable lid and removable GPIO for easy access to the 40-pin GPIO port. Compatible with Raspberry Pi 3 Model B and B+ (Plus). Dimensions: 96x70x25mm
4,45 € tax incl.Out of stock, available within 6-12 months3,71 €tax excl.
8,90 € -50% -
DV MEGA board singleband UHF D-Star DMR C4FM
DVMEGA RPI UHF is a radio module, digital transceiver, in GMSK mode, singleband for 430 to 450Mhz and designed to work with a Raspberry Pi card (not included), for digital mobile radio D-Star, DMR and
95,00 € tax incl.Material no longer available79,17 €tax excl.
-
DV MEGA dual-band VHF-UHF D-Star DMR C4FM
The radio module DVMEGA VHF & UHF, designed to work with a Raspberry Pi card (not included) or Bluestack Micro+ (not included), to make it a digital hotspot in GMSK mode for 144 to 148 Mhz and 430
149,00 € tax incl.Material no longer available124,17 €tax excl.
-
Case for Raspberry Pi 1, 2 & 3 Model B/B+
Case for Raspberry Pi, with removable and transparent cover, designed to house the Raspberry Pi 3 model B/B+, Raspberry Pi 2 model B & Raspberry Pi 1 model B+.The case has space for most HATs and
4,45 € tax incl.Out of stock, available within 6-12 months3,71 €tax excl.
8,90 € -50% USB 2.0 Micro-USB Male A Cable - Male B Vention
High-quality USB 2.0 to micro-USB flat cable, Male A - Male B, high-speed.Power cord for Hotspot BlueDV, Raspberry Pi card, phone and smartphone Samsung S3, S4, S5 and any device with micro-USB power
2,00 € tax incl.In stock1,67 €tax excl.
Raspberry Pi 4 B WiFi 2.4 / 5.0 GHz BLE DDR memory 2Go 4Go or 8 Go
The new Raspberry Pi 4 B has a Quad Core 1.5Ghz 64bits processor, 2.4Ghz / 5Ghz WiFi functions, Bluetooth Low Energy (BLE 5.0), 1Go, 2Go, 4Go or 8Go DDR memory, dual video display with resolution up
63,57 € tax incl.Out of stock, available within 2-3 weeks52,98 €tax excl.
Raspberry Pi 5 WiFi 2.4 / 5.0 GHz HDMI 4K BLE 5.0 DDR 4GO or 8GO
The new Raspberry Pi 5 is the latest development in the RPi series. Compared with its predecessor, it features a faster Broadcom BCM2712 processor running at 2.4 GHz, with 4GB or 8GB of SDRAM memory,
84,75 € tax incl.Out of stock, available within 2-3 weeks70,63 €tax excl.
Delivery Europe & Overseas
Stock and shipped from France
Product return
14 days to return, 2 warranty
Email support
Response within 24h to 72h
Secure payment
SSL, VISA, Mastercard, Paypal
Copyright 2014-2024 - Passion Radio / 4 MY PEOPLE.
Les photos et coloris ne sont pas contractuels.