2.4 GHz WIFI PCB Antenna with U.FL IPEX connector

Additional or similar equipment

• 

  3G/4G/GSM/WIFI SMA antenna 5dBi

  Antenna high performance with a gain of 5dbi and SMA male connector for GSM device and multiband 3G, 4G, WiFi, UMTS, EDGE and GPRS. Frequencies: 690-960Mhz et 1710-2620MHzGSM / GPRS / EDGE

  13,90 € tax incl.

  11,58 €tax excl.

  In stock
• 

  Coaxial cable extension low loss 2X SMA Male

  Cable SMA Male to SMA Male with 50-ohm coaxial cable low loss KSR195 for use from 0 to 6GHz.Length: 0,5m (50cm), 1, 3 or 5 metersConnector 1: SMA MaleConnector 2: SMA Male

  8,01 € tax incl.

  6,68 €tax excl.

  8,90 € -10%

  In stock, send from Europe
• 

  Coaxial cable extension 1, 2, 5 or 10m SMA Male and Bare end (KSR195)

  Coaxial cable 50 ohms low loss KSR195 5mm, for use from 0 to 6Ghz and with an SMA Male connector at one end and without connector at the other end (bare end to be welded or crimped).Length: Available

  8,01 € tax incl.

  6,68 €tax excl.

  8,90 € -10%

  In stock
• 

  Quad Patch WIFI antenna 2400-2480Mhz 12dBi

  Printed circuit PCB wifi antenna WA5VJB Quad Patch for 2.4Ghz with a gain of 12dBi.The antenna is delivered without connector (solder wire).Frequencies: 2400-2480 MHz (WIFI 2.4 Ghz)Type: Patch

  20,52 € tax incl.

  17,10 €tax excl.

  21,60 € -5%

  In stock
• 

  RF Amplifier 2400 MHz 20dB Analog Devices CN0417

  The Analog Devices CN0417 is a small RF power amplifier, powered by micro-USB, optimized to operate on 2400 MHz with 100mW max, gain of 20-21dB max., with a integrated bandpass filter 2400 to

  55,00 € tax incl.

  45,83 €tax excl.

  Out of stock, available in 1 month
• 

  Quad Patch antenna WIFI 5G 5800Mhz 12dBi WA5JVB

  Printed circuit antenna WA5VJB Quad Patch for 5.8Ghz with a gain of 12dBi. The antenna is delivered without connector (solder wire on the PCB).Frequencies: 5800 MHzType: PatchNumber of elements:

  9,25 € tax incl.

  7,71 €tax excl.

  18,50 € -50%

  In stock
• 

  Dual Patch antenna WIFI 5G 5800Mhz 9dBi WA5JVB

  Printed circuit antenna WA5VJB Dual Patch for 5.8Ghz with a gain of 9dBi max. The antenna is delivered without connector (solder wire on the PCB).Frequencies: 5800 MHzType: PatchNumber of elements:

  12,26 € tax incl.

  10,21 €tax excl.

  12,90 € -5%

  In stock
• 

  LHCP & RHCP Patch Antenna 2400Mhz and QO-100 2.4Ghz Satellite

  WA5VJB single patch antenna for 2.4Ghz with left circular LHCP or right circular RHCP polarization and 6dBi gain.This antenna is compatible for use in 2400Mhz transmission on the narrow transponder

  11,88 € tax incl.

  9,90 €tax excl.

  12,50 € -5%

  In stock
• 

  2.4 Ghz SAW Bandpass filter for QO100

  This bandpass filter for the 2.4 Ghz (13cm) allows to reject the local oscillator and harmonics frequencies of the Up-Converter for QO-100 to get a clean signal on the satellite, with a max. input

  25,90 € tax incl.

  21,58 €tax excl.

  In stock
• 

  Pigtail U.FL IPEX to SMA Female RG178 15cm

  RF pigtail U.FL / UFL to SMA female with RG178 coaxial cable, impedance 50 ohms, 15cm length.The U.FL connector is also called UFL, IPEX, IPAX, IPX, MHF, AMC and UMCC.This U.FL / UFL cable is

  4,41 € tax incl.

  3,68 €tax excl.

  4,90 € -10%

  In stock
• 

  Pigtail U.FL IPEX to RP-SMA Female RG178 15cm

  Pigtail RF cable U.FL / UFL to RP-SMA Female adapter (Reverse SMA - SMA inverted) with RG178 coaxial cable, impedance 50 ohms, 15cm length.The U.FL connector is also called UFL, IPEX, IPAX, IPX, MHF,

  4,41 € tax incl.

  3,68 €tax excl.

  4,90 € -10%

  In stock
• 

  Pigtail U.FL IPEX to SMA Male RG178 15cm

  RF cable pigtail adapter UFL / U.FL (IPEX ) to SMA Male with RG178 coaxial cable of 15cm length and impedance of 50 ohmsThe UFL connector is also called U.FL, IPX, MHF, IPEX, IPAX, UMCC. and AMC.

  4,05 € tax incl.

  3,38 €tax excl.

  4,50 € -10%

  In stock