Transparent plexiglass case for DMR D-Star C4FM digital hotspot BlueDV and suitable for the Bluestack Micro+ (Plus) card with DVmega card (cards not included).
This box allows to see completely the operation of the card Bluestack and the DVMega. This case is especially reserved for use at home on a desktop. If you need a reinforced protective case for mobile or portable operation, we recommand this other model of case for BlueDV.
Mounting is simple and does not require tools. The case is delivered as a panel to be assembled, covered with a green plastic protective film which must be removed before assembly otherwise the fixing clips will break!
Delivered with: High gloss plexiglass panel case, push button cover and 4 clips to close the case.
The new Raspberry Pi 3 model B & B+ features a 1.4Ghz Quad Core processor, WiFi 2.4Ghz / 5Ghz and Bluetooth Low Energy (BLE), making it even easier to develop RF and IoT radio applications. CPU
Mini-Antenna for 433Mhz activity (such as DMR, D-Star, P25 or C4FM) with SMA male connector for UHF device from 418Mhz to 438Mhz. Frequencies: 433Mhz +/-5MhzConnector: SMA male Length: 9,3 cm
Mini-Antenna for 433Mhz activity (such as DMR, D-Star, P25 or C4FM) with a gain of 2dbi and SMA male connector for UHF device from 418Mhz to 438Mhz. Frequencies: 433Mhz +/-5MhzConnector: SMA male
The radio module DVMEGA VHF & UHF, designed to work with a Raspberry Pi card (not included) or Bluestack Micro+ (not included), to make it a digital hotspot in GMSK mode for 144 to 148 Mhz and 430
The board is equiped with a AMBE 3000 Vocoder and PCM3500 Codec. DVMEGA AMBE 3000 shield fits on top of an Arduino MEGA. The PCM3500 converts the analog microphone signal into a digital stream
This Bluestack Micro+ (Plus) allows you to manage a DVMEGA hotspot (not included) in bluetooth from a smartphone. The card simply comes to the DVmega card and it is no longer necessary to have a
Plastic housing for Bluestack Micro / Micro + (Plus) and DVmega dual-band hat only (not included).Case made in 3D printing. Simple installation without tools.The diameter of the antenna hole is 10mm,
The BlueDV hotspot includes all the elements to simply create a digital multi-mode hotspot (access point) in UHF (430-440Mhz) for D-Star, DMR or C4FM modes and can be controlled directly from an
Antenna Nagoya NA-810 7.5cm long, dual-band 144Mhz & 430MHz with a gain of 0dBi, SMA male connector, and 150/300/450/800/900 MHz receive onlyFrequency RX & TX: 144Mhz and 430MHzReceive only
Mini antenna 4cm long for 433MHz with a gain of 0dBi, SMA male connector, suitable for DV Mega UHF, pack BlueDV UHF and DV4mini UHF.Frequency: 435MHz +/- 5MHzConnector: SMA maleGain: 0dBiVSWR:
BI7JTA's Raspberry Pi duplex MMDVM hotspot is a multimode digital access point: D-Star, DMR, C4FM, P25, POCSAG and NXDN, for the amateur radio bands VHF 144-148Mhz and UHF 430-450Mhz, with 10mW
Be the first to ask a question about this product!
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal