Nebra IP67 waterproof and weatherproof...
Nebra IP67 waterproof and weatherproof enclosure for outdoor use, Raspberry Pi based RF mount, compatible with Nebra helium hotspot and LoRa HAT IoT gateway for Raspberry Pi.
Heavy duty double hinges with captive screws. For N-type antenna connectors, up to 5 antennas possible for use on a relay or smart multi-band or MIMO antenna applications.
NEMA-67 rated, this Nebra helium hotspot box offers complete protection against the penetration of dust as well as protection, including against submersion under water.
Supplied with: 1 Nebra IP67 box for HNT helium hotspot.
This EBYTE E32 module is a 100mW long range transceiver with UART interface, available in 433Mhz or 868Mhz version and based on SEMTECH chip SX1276 (868Mhz) and SX1278 (433Mhz) for LoRa network and
The IoT LoRa Raspberry Pi HAT allows to create an economical LoRa gateway compatible with The Things Network (TTN) on the ISM Europe 868Mhz band.This HAT for Raspberry Pi allows you to configure your
Coaxial cable type extension, low loss KSR-400, with RP-SMA Male to N Female connector for use from 0 to 6Ghz. The KSR400 coaxial is equivalent to the LMR-400 in terms of performance and losses.
The Diamond SP3000P surge arrester operates for frequencies from 0 to 3000 MHz and for a maximum transmission power of 400W, it is equipped with an N plug connector and offers a low insertion loss of
Omnidirectional vertical antenna for outdoor use, for transmission and reception on the ISM 868 MHz band (eg LoRa, LoRawan, Helium hotspot, Sigfox), with a gain of 5.8dBi, and N Male connector. A mast
Omnidirectional vertical antenna for outdoor use, for transmission and reception on the 868 MHz ISM band (eg LoRa, LoRawan, Helium hotspot, Sigfox), with a gain of 8dBi, and N Male connector. A mast
Be the first to ask a question about this product!
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal