No products
New products
-
Komunica PWR-SG-7900 High Gain VHF/UHF Mobile Antenna 144/430 MHz 150W
62,96 € tax excl. -
-
Komunica PMR-220 External Speaker 10W 8 Ohm for CB Amateur Radio VHF/UHF
19,96 € tax excl. -
Komunica PWR-SB1-M External Speaker 5W MARINE IP67
46,33 € tax excl.
Viewed products
-
ICOM DIN8 Digirig...
Digirig Mobile 1.6+ cables for ICOM...
-
ICOM HM-159LA speaker microphone IP54 waterproof for ICOM IC-V80E walkie talkie
63,50 € -10% 70,56 €
Online only
ICOM DIN8 Digirig Cable Set
No review at the momentDigirig Mobile 1.6+ cables for ICOM transceivers using DIN8 and 3.5mm TRS connectors
- coiled cables keep things tidy by avoiding knots and kinks
- one DIN8 audio/PTT cable and one 3.5mm TRS CI-V serial cable
- approximately 24″ extended, 72″ fully extended
- shielded and RF muffled with ferrite beads at both ends to avoid radio frequency interference (RFI)
- premium materials and craftsmanship
This cable requires Digirig Mobile Revision 1.6 or later configured for CI-V.
Compatible with : ICOM IC-275, IC-707, IC-721, IC-725, IC-726, IC-728, IC-729, IC-732, IC-735, IC-736, IC-737, IC-738, IC-7400, IC-746, IC-746PRO, IC-756, IC-7600, IC-761, IC-765, IC-7700, IC-775, IC-7800, IC-781, IC-820, IC-820H, IC-821, IC-821H, IC-910H, IC-970, IC-M710.
Customers also bought
69,00 €Reference: DIGIRIG-DRMOB-2946
Digirig Mobile USB interface for digital modes with CAT PTT & audio control
Digirig is an integrated USB interface for digital amateur radio modes (FT8, SSTV, RTTY, CW, VARA, etc.) combining an audio codec, a CAT serial interface and PTT control. All you need is a simple USB
69,00 €Online only
9,90 €Reference: CABLE-COAXIAL-UHF-M-1M-876
Low-loss coaxial cable extension UHF Male (PL-259) KSR195
UHF Male - UHF Male coaxial cable extension with KSR195 low-loss 50 ohm coaxial cable for use from 0 to 6 GHz. Available lengths: 50cm, 1, 2, 3, 5 or 10, 15 and 20 metresConnector 1: UHF Male
9,90 €
37,90 €Reference: DIGIRIG-ICOMMOBILE-2953
Digirig cable for Icom IC-706 IC-7000 IC-706MKIIG IC-7100 with mini DIN13
Digirig Mobile 1.6+ cables for ICOM transceivers: IC-7000, IC-703, ICOM IC-706, ICOM IC-706MKII, IC-706MKIIG, IC-7100, IC-718, IC-7200, IC-7300, IC-7410, IC-78, IC-9100, IC-970A, IC-970E, IC-970H.
37,90 €Online only
37,90 €Reference: DIGIRIG-BFENGMOBILE-2962
Cable Digirig DATA & programming for walkie-talkie Baofeng Kenwood Anytone TYT Wouxun with 2 pins K1
Digirig Mobile 1.6+ cables for walkie-talkies with a standard Kenwood (K1) connector, such as the brands: Baofeng, Anytone, Wouxun, TYT, Kenwood.Compatible with popular walkie-talkies fitted with a
37,90 €Online only
We also recommend
34,90 €Reference: SIGNALINK-CABLE-SLCAB8PD-1485
Signalink SLCAB-8PD Mini-DIN 8-pin DATA radio cable for Icom Ten-Tec
The Signalink SLCAB8PD radio interface cable can be used with the Signalink USB sound card and with practically all ICOM, Ten-Tec radios which have an 8-pin mini-DIN data port (DATA socket). This
34,90 €
275,00 €Reference: ICOM-SM50-1796
ICOM SM-50 8-pin table microphone for IC-7300 IC-746 IC-7610 IC-7100 IC-7760
ICOM SM-50 8-pin unidirectional table microphone for IC-7300 for example, see list of compatible devices below*. * Requires OPC-589 adapter for RJ45 > 8-pin microphone socket for transceivers with
275,00 €
189,00 €Reference: SIGNALINK-PACK-SLUSB8PD-1516
Signalink-SLUSB-8PD pack for ICOM with 8-pin mini-din DATA socket
The Signalink-SLUSB-8PD interface pack is compatible with practically all ICOM and Ten-Tec radios equipped with an 8-pin mini-DIN data port (DATA socket) such as: ICOM IC-756, IC-7600 , IC-7610,
189,00 €
189,00 €Reference: SIGNALINK-PACK-SLUSB8RI-1708
Signalink-SLUSB-8R + SLMOD-8RI pack for ICOM with 8-pin mic jack
The Signalink SLUSB-8R + SLMOD-8RI interface pack is compatible with ICOM radios equipped with an 8-pin micro such as ICOM : IC-707/718/720/725/726, IC-728/729/730/735, IC-736/737/738/740/745,
189,00 €
Reviews
Additional or similar equipment
-
Signalink SLCAB-8PD Mini-DIN 8-pin DATA radio cable for Icom Ten-Tec
The Signalink SLCAB8PD radio interface cable can be used with the Signalink USB sound card and with practically all ICOM, Ten-Tec radios which have an 8-pin mini-DIN data port (DATA socket). This
34,90 € tax incl.In stock29,08 €tax excl.
-
Signalink-SLUSB-8PD pack for ICOM with 8-pin mini-din DATA socket
The Signalink-SLUSB-8PD interface pack is compatible with practically all ICOM and Ten-Tec radios equipped with an 8-pin mini-DIN data port (DATA socket) such as: ICOM IC-756, IC-7600 , IC-7610,
189,00 € tax incl.Out of stock, available within 1-2 months157,50 €tax excl.
-
Signalink-SLUSB-8R + SLMOD-8RI pack for ICOM with 8-pin mic jack
The Signalink SLUSB-8R + SLMOD-8RI interface pack is compatible with ICOM radios equipped with an 8-pin micro such as ICOM : IC-707/718/720/725/726, IC-728/729/730/735, IC-736/737/738/740/745,
189,00 € tax incl.Out of stock, available within 1-2 months157,50 €tax excl.
-
ICOM SM-50 8-pin table microphone for IC-7300 IC-746 IC-7610 IC-7100 IC-7760
ICOM SM-50 8-pin unidirectional table microphone for IC-7300 for example, see list of compatible devices below*. * Requires OPC-589 adapter for RJ45 > 8-pin microphone socket for transceivers with
275,00 € tax incl.Out of stock, available within 1 month229,17 €tax excl.
ICOM SM-30 8-pin table microphone for IC-7300 IC-746 IC-7610 IC-7100 IC-7760
ICOM SM-30 8-pin unidirectional table microphone for IC-7300 for example, see list of compatible devices below*. * Requires OPC-589 adapter for RJ45 > 8-pin microphone socket for transceivers with
209,00 € tax incl.In stock174,17 €tax excl.
8-pin DIN male connector for Yaesu Kenwood Icom
High quality 8Pin DIN Plug Socket Connector Keyboard and Mouse Connector for PS2 and MIDI ConnectionSpecification :- Model : Male MIDI Connector- Length : 58mm- Head outer diameter : 13.5mm- End
1,92 € tax incl.Out of stock. Available within 1 to 2 months1,60 €tax excl.
ICOM OPC-589 RJ45 8-pin micro socket adapter for IC-2730E IC-7800 IC-746 IC-7000
8-pin microphone socket to Rj45 socket adapter ICOM OPC-589. Compatible with the following devices: IC-2730E, IC-7800, IC-746, IC-7000, IC-7100, ID-5100E. Compatible accessories: SM-50, SM-30, HM-219,
25,00 € tax incl.In stock20,83 €tax excl.
HT ICOM cable for Digirig Mobile
Digirig Mobile Rev 1.6+ Audio/PTT cable for ICOM HTs using dual 3.5mm/2.5mm connectors with 10mm spacing.The data cable supports digital modes and packet radio protocols such as FT8, FT4, SSTV,
25,90 € tax incl.In stock21,58 €tax excl.
ICOM RJ-45 cable for Digirig Mobile
Digirig Mobile Rev 1.6+ data modes cable for Mobile ICOM transceivers using RJ-45 mic jack and 3.5mm TRS speaker connector.This cable works with ICOM and other mobile transceivers using RJ-45 mic
37,90 € tax incl.In stock31,58 €tax excl.
-
Digirig Mobile USB interface for digital modes with CAT PTT & audio control
Digirig is an integrated USB interface for digital amateur radio modes (FT8, SSTV, RTTY, CW, VARA, etc.) combining an audio codec, a CAT serial interface and PTT control. All you need is a simple USB
69,00 € tax incl.In stock57,50 €tax excl.
-
Digirig cable for Icom IC-706 IC-7000 IC-706MKIIG IC-7100 with mini DIN13
Digirig Mobile 1.6+ cables for ICOM transceivers: IC-7000, IC-703, ICOM IC-706, ICOM IC-706MKII, IC-706MKIIG, IC-7100, IC-718, IC-7200, IC-7300, IC-7410, IC-78, IC-9100, IC-970A, IC-970E, IC-970H.
37,90 € tax incl.Out of stock31,58 €tax excl.
USB 2.0 isolator USB galvanic protection and 400mA ground loops
RF-KONNECT's USB isolator isolates a USB device from the host computer (PC), ideal for amateur radio stations connected by USB to a computer to reduce noise and interference from a computer.
44,10 € tax incl.In stock36,75 €tax excl.
49,00 € -10%
Europe & Overseas
Shipped from France
Product return
14 days to return, 2 warranty
Email support
Response within 24h to 72h
Secure payment
SSL, VISA, Mastercard, Paypal
Copyright 2014-2026 - Passion Radio / 4 MY PEOPLE
Les photos et coloris ne sont pas contractuels.