Designed to succeed the GoodFET project the GreatFET One is a universal USB device. By adding expansion cards called "neighbors", you can turn GreatFET One into a USB device that does almost anything.
GreatFET One is the maker's or hacker's best friend, with an expandable open-source design, 2 USB ports and 100-pin expansion, GreatFET One is an essential tool for hacking, designing and reverse engineering.
Comes with: 1 GreatFET One PCB Original Great Scoot Gadgets, with a high-speed USB cable.
- Microcontroller LPC4330 (U1)
- 1 high speed USB0 port (USB 2.0)
- 80-pin expansion interface (J1 and J2)
- Additional row of 20 male pins
- 4 LEDs
- 2 buttons for development (DFU and RESET)
- 1 USB1 port for connecting to a target (eg Facedancer)
- Power switch for use of USB1 as host or device
- Real time clock with quartz
- 3.3V regulator able to supply power to neighbors
- 2 MB of flash memory
- Unpopulated Cortex Debug Header (J5) for JTAG or SWD
- 1 year warranty material
GreatFET One documentation is available on Github wiki.
Be the first to ask a question about this product!
Wi-Fi USB 2.0 Dongle Octagon WL008, supports wifi standards: IEEE 802.11b, IEEE 802.11n, IEEE 802.11g up to 150 Mbps.Automatically detects network status and transmission speed and supports roaming to
This USB cable to micro-USB can be used as power cable for Raspberry Pi, cell phone Samsung S3, S4, S5 or any device with micro USB power port.
The HackRF One is a SDR receiver-transmitter covering from 1MHz to 6GHz in all available modes, analog and digital.Tip: For use in the lab, or with strong signals nearby, the sensitivity of the device
The Throwing Star LAN Tap is a small and simple passive device for monitoring or sniffing, 10BASE-T, 100BASE-TX and 1000BASE-T Ethernet communications and networks. You just insert it in-line on a
USB OTG host cable adapter ompatible with Motorola Xoom, Samsung Galaxy S2/S3/S4/S5, Nokia N900/N810, and any other Micro USB devices with USB Host mode support features supported. - Connector Micro
The EspoTek Labrador is a USB-connected mini electronic lab portable that includes an oscilloscope, signal generator, power supply, logic analyzer and multimeter. Oscilloscope (2 channels,
Neosegment Digit is a modular, OPEN-SOURCE seven-segment RGB display. It can display all numbers and symbols in any color, without additional circuit, which differentiates it from other displays in
PERF2+ is an electronic prototyping board designed for electronics enthusiasts and to make prototyping easier and faster. Perf2+ is a double-sided circuit board with perpendicular marks on each side.
With the Ripcord USB power cable, you have the freedom to power anywhere you are any device in 5, 9 or 12V from a USB port of a laptop, from an external battery or from a smartphone/tablet (with OTG
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal