No products




Selection of RF connectors, adapters, cables and accessories.
China
Reference: CABLE-USB1-90CM-FERRITE-850
USB 2.0 printer cable Male A - Male B, with 2 ferrites to protect against interference and parasites. This cable is used to power and communicate with a printer or scanner, as well as SDR receiver
Reference: RF-KONNECT-DONUTAM-87T295-3006
TheAM loop-donut antenna covers a frequency range of 500 to 2000 kHz, and is compatible with an SDR receiver, Malachite, Malahit or other receiver for indoor reception. High-impedance (Hi-Z)
Reference: ANT-GPS-81T402-886
Active GPS antenna (ceramic) with LNA, magnetic support, RG174 coaxial cable with male SMA connector. This active antenna can be used with any equipment fitted with an SMA connector and a 3.3V Bias-T
Reference: RFKONNECT-PEDALE-PTT-3071
Universal foot switch for activating PTT transmission by foot, without having to touch the microphone. Its non-slip metal casing ensures reliability and long life.PTT foot switch: keeps your hands
Reference: RF-KONNECT-87T298-SPF5189Z-833
This SPF5189Z LNA preamp improves reception performance from 50 Mhz to 4000 Mhz, based on SPF5189Z, with a noise factor of 0.6 dB and a maximum gain of approximately 20dB.This low noise amplifier is
Reference: PIGTAIL-BNC-M-BNC-M-2274
BNC Male to BNC Male pigtail cable with 120cm 50 ohm RG 316 coaxial cable.
Reference: ADAPT-N-M-UHF-F-252
RF adapter for N male to UHF female connector (SO239). Impedance 50 ohms.
Reference: PIGTAIL-BNC-F-UHF-M-2017
UHF Male to BNC Female pigtail adapter. 15 cm RG 316 50 ohm coaxial cable.
Reference: ADAPT-N-M-UHF-M-437
RF N male to UHF male adapter. Impedance 50 ohms. Sold individually.
Reference: ADAPT-N-F-N-F-433
RF adapter, N female to N female connector. Impedance 50 ohms.
Reference: CABLE-COAXIAL-SMA-COUDE-1M-932
KSR195 low-loss 50-ohm coaxial extension cable for use from 0 to 6Ghz, with angled SMA connector and straight male SMA connector.Available lengths: 50cm, 80cm, 1, 2, 5 and 10 meters Connector 1: SMA
Reference: ADAPT-MUHF-M-UHF-F-841
RF adapter with mini-UHF Male to UHF Female connector (SO-239). Impedance 50 ohms.
Reference: ADAPT-UHF-M-COUDE-UHF-F-450
Angled RF adapter with UHF Male (PL-259) to UHF Female (SO-239) connector. Impedance 50 ohms.
Reference: ADAPT-BNC-M-UHF-F-COUDE-1456
BNC Male to UHF Female (SO-239) angled adaptor. Connector 1: BNC MaleConnector 2: UHF Female (SO239)
Reference: CABLE-RG58-BNC-UHF-50CM-1117
Coaxial patch cable with BNC Male - UHF Male connector (PL-259) with RG58 MIL-C-17 50 ohm coaxial cable for use in frequencies from 0 to 1000Mhz. Available in different lengths: 50cm, 1m or 2 metres.
Reference: ADAPT-N-M-SMA-F-601
RF adapter for N male connector to SMA female connector.
9,20 €
Reference: CORDON-RG58-BNC-30CM-1115
Coaxial patch cable with BNC Male connector - BNC Male with RG58 MIL-C-17 50 ohm coaxial cable for use in frequencies from 0 to 1000Mhz. Available in different lengths: 30cm, 50cm, 1m or 2 metres
Reference: ADAPT-N-F-UHF-M-251
RF adapter for N female to UHF male connector (PL-259). Impedance 50 ohms, gold-plated.
Reference: PIGTAIL-SMA-M-BNC-F-83
SMA Male to BNC Female pigtail adapter. RG 316 50 ohm coaxial cable, approx. 15 cm or 50cm long.
Reference: ADAPT-N-M-BNC-F-3093
Adapter with male N connector to female BNC connector. Impedance 50 ohms.
Reference: ADAPT-F-M-N-F-732
RF adapter for F male to N female connector. The F connector is particularly used for satellite equipment.
Reference: RFKONNECT-PCB-DEMO-KIT2-1077
This NanoVNA RF demo kit is composed of a PCB to assemble, to perform tests or demonstration of RF integrated circuit (DIP) and SMT (SMT) components.Adapted to work with vector network analyzer
Reference: RFKONNECT-ANTENNA-ADSB-308
Passive omnidirectional PCB antenna for ADS-B reception on 1090 MHz, operates on RX from 1060 to 1120 MHz. The antenna is supplied with a female SMA connector soldered to the PCB. Optional: SMA
Reference: ADAPT-TNC-M-UHF-M-1457
RF adapter for TNC Male to UHF Male connector (PL-259). Connector 1: TNC MaleConnector 2: UHF Male (PL259)Impedance 50 ohms
8,90 €
Reference: PIGTAIL-FZ-M-DIN-M-2838
Adapter cable Fakra Z Male to DIN Male RG174 coaxial, 20cm long Impedance 50 ΩFor RF applications, for example, in the automotive sector, car radio aerials, FM, DAB or DAB+, GPS, etc.
Reference: PIGTAIL-FZ-M-RCA-M-2841
Adapter cable Fakra Z Male straight to RCA Male RG174 coaxial, 20cm long Impedance 50 Ω
Reference: RFKONNECT-GAINE-81T405-2195
Packaged box DIY Heat Shrink Tube Insulation Sleeve for Electric Wire and Cable Flame Retardant Shrink TubeMethod of use:- Prepare the tools- Insert the wires to be connected into the heat-shrink
Reference: RFKONNECT-TROUSSE-81T658-2244
25 pieces screwdriver sets Omnipotent Repair Tool for Electronics Maintenance with Aluminum Handle and Carbon Steel HeadApplication:- Hamradio, homebrew, mobile phone. camera. fans. laptop. toys.
Reference: PIGTAIL-FZ-F-DIN-F-2839
Adapter cable Fakra Z Female straight to DIN Female RG174 coaxial, 20cm long Impedance 50 ΩFor RF applications, for example, in the automotive sector, car radio aerials, FM, DAB or DAB+, GPS, etc.
Reference: CABLE-RG58-BNC-SMA-50CM-1116
Male coaxial cable with BNC connector - Male SMA with 50 ohm RG58 MIL-C-17 coaxial cable for use in frequencies from 0 to 1000Mhz. Available in different lengths: 50cm, 1m or 2 metres. Connector 1:
Reference: ADAPT-UHF-M-UHF-F-2407
RF adapter with UHF Male (PL-259) to UHF Female (SO-239) connector. Impedance 50 ohms.
Reference: PIGTAIL-SMA-F-UHF-F-599
Adapter cable pigtail SMA Female to plug UHF Female. RG316 50 ohm coaxial cable, 15 cm long.
Reference: PIGTAIL-F-MALE-UHF-F-738
Adapter pigtail cable F Male to UHF Female. RG316 coaxial cable 50 ohms and 15cm. The F connector is particularly used for satellite equipment.
Reference: RFKONNECT-QO100-BIAS-T2-1267
This BIAS-TEE module can be used to power an RF accessory such as an LNA preamp preamplifier or a LNB PLL 10Ghz to receive QO100. Power is supplied via an external DC power supply (30V max.) by
Reference: CABLE-COAX-F-M-SMA-1M-875
F Male to SMA Male coaxial cable, with RG58 coaxial cable, 50 Ohms, available in 1, 2, 5 or 10m. The F connector is mainly used for TV and satellite equipment.
Reference: ADAPT-TNC-M-UHF-F-1458
RF adapter for TNC Male to UHF Female connector (SO-239). Connector 1 : TNC MaleConnector 2 : UHF Female (SO239)Impedance 50 ohms
Reference: PIGTAIL-FZ-M-FZ-M-2842
Adapter cable Fakra Z Male straight to Fakra Z Male RG174 coaxial, 20cm long Impedance 50 ΩFor automotive applications, car radio aerials, FM, DAB or DAB+, GPS, etc.
Reference: PIGTAIL-FZ-F-FZ-F-2843
Adapter cable Fakra Z Female straight to Fakra Z Female RG174 coaxial, 20cm long Impedance 50 ΩFor RF applications, for example, in the automotive sector, car radio antenna, FM, DAB or DAB+, GPS,
Reference: PIGTAIL-FZ-M-FZ-F-2844
Adapter cable Fakra Z Male to Fakra Z Female RG174 coaxial, 20cm long Impedance 50 ΩFor RF applications, e.g. automotive, car radio antenna, FM, DAB or DAB+, GPS, ...
Reference: PIGTAIL-FZ-M-SMB-F-ANGLE-2847
Adapter cable Fakra Z Male straight to SMB right angle Female RG174 coaxial, 20cm long Impedance 50 Ω
Reference: CABLE-RG402-SMA-COUDE2-991
RG-402 ultra-low-loss coaxial cable with male SMA connector angled on 2 sides, 50 ohm ultra-low-loss cable, 10 cm long. Note: This rigid cable can be bent, but once installed in its position of use,
Reference: PIGTAIL-MCX-F-UHF-F-453
MCX UHF Female to UHF Female adapter. RG 316 50 ohms coaxial cable, 15 cm long.
Reference: PIGTAIL-BNC-F-MCX-M-51
MCX Male to BNC Female pigtail adapter. The MCX connector is the one used by the DVB-T DTT Dongle dongle we offer. RG 316 50 ohm coaxial cable. Available in 15cm, 50cm or 1 metre lengths (choose
Reference: ADAPT-UHF-M-UHF-M-293
RF adapter for UHF Male to UHF Male connector (PL-259). Impedance 50 ohms.
Reference: ANT-MINI-GSM-97
High-gain antenna (1.5dbi) with male SMA connector for GSM and multiband. Frequencies: 824 to 960MHz (EDGE, GPRS, GSM 850, GSM 900) and 1800 to 2170MHz (GSM 1900, UMTS/3G 1900/2100)Gain: 1.5dBi VSWR:
Reference: RFKONNECT-OREILLE1-81T629-2233
Acoustic tube walkie-talkie earphones with K-port, 3D stereo and intelligent noise reduction function- The white porcelain horn does not generate electric current or other noisy sounds, making the
8,88 €
Reference: RFKONNECT-PCB-ATTENUATEUR-1011
This PCB-based RF attenuator module reduces the power of a radio signal by -10 to -30dB, with a maximum input power of 23dBm (200Mw), with female SMA connector, for use from 0 to 4000Mhz (4Ghz).
8,90 €
Reference: PIGTAIL-MCX-15MM-557
MCX Male to MCX Male adapter. The MCX connector is compatible with the DVB-T USB dongle USB Dongle and the QRP X5105 for use as a panadapter. RG 316 50 ohm coaxial cable. Available in 15cm, 50cm or 1
8,16 €
Reference: CABLE-COAXIAL-MCX-M-2M-4972
KSR195 5mm low-loss 50 ohm coaxial cable, for use from 0 to 6Ghz, with an MCX Male connector at one end and no connector at the other (bare end to be soldered or crimped). Length: 2, 5 or 10
1,73 €
Shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal
Copyright 2014-2026 - Passion Radio / 4 MY PEOPLE
Les photos et coloris ne sont pas contractuels.