Be the first to ask a question about this product!
Nooelec's Ham It Up v1.3 is an up-converter HF, equipped with the 125Mhz filter soldered on the PCB and allows to listen to all MF / HF bands from 0.5 to 50 Mhz, in all modes of modulation, from a
This USB cable to micro-USB can be used as power cable for Raspberry Pi, cell phone Samsung S3, S4, S5 or any device with micro USB power port.
USB 3.0 cable blue and 1.5 meters in length, Male A to Male B. Speeds more than 10X that of it's predecessor in 2.0 and up to 5.0 Gbs. Warning: This USB cable is a 3.0 version and is not compatible
USB OTG host cable adapter ompatible with Motorola Xoom, Samsung Galaxy S2/S3/S4/S5, Nokia N900/N810, and any other Micro USB devices with USB Host mode support features supported. - Connector Micro
The new SDRPlay RSPduo is a 14-bit SDR dual receiver that covers from 1kHz to 2GHz (without hole), with dual-tuner (simultaneous reception on 2 different antennas). The SDRDuo is equipped with a
With the Ripcord USB power cable, you have the freedom to power anywhere you are any device in 5, 9 or 12V from a USB port of a laptop, from an external battery or from a smartphone/tablet (with OTG
Hi-Quality USB 2.0 Vention print cable Male A - Male B, high-speed and ferrite cable for protection against interference and interference.This cable is used to power a printer or scanner, as well as
High-quality USB 2.0 to micro-USB flat cable, Male A - Male B, high-speed.Power cord for Hotspot BlueDV, Raspberry Pi card, phone and smartphone Samsung S3, S4, S5 and any device with micro-USB power
The new SDRPlay RSPdx receiver is the replacement of the RSP2PRO, it covers from 1kHz to 2GHz (without hole) with 10MHz of the spectrum on the screen, 14-bit sampling, with TCXO 0.5PPM, notch filter
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal