USB 2.0 Quality Printer cable / Ham it Up / SDRPlay

Accessories

• 

  Ham it Up 1.3 & 1.3+ Converter HF 0.5-50Mhz Nooelec

  Nooelec's Ham It Up v1.3 is an up-converter HF, equipped with the 125Mhz filter soldered on the PCB and allows to listen to all MF / HF bands from 0.5 to 50 Mhz, in all modes of modulation, from a

  48,00 €

  Out of stock, available soon 5-7 days
• 

  Micro-USB power cable black or white

  This USB cable to micro-USB can be used as power cable for Raspberry Pi, cell phone Samsung S3, S4, S5 or any device with micro USB power port.

  1,95 €

  In stock
• 

  USB 2.0 cable Male A-B 3 meters for printer & SDRPlay RSP

  USB 2.0 Male A - Male B cable, transparent blue with ferrite and 3 meters long. It allows the use of a printer or SDR Ham It Up converter card or the SDRPlay RSP receiver. Thanks to its length of 3

  6,00 €

  Out of stock, available in 7-10 days
• 

  USB 3.0 cable Male A-B 1.5m

  USB 3.0 cable blue and 1.5 meters in length, Male A to Male B.  Speeds more than 10X that of it's predecessor in 2.0 and up to 5.0 Gbs. Warning: This USB cable is a 3.0 version and is not compatible

  2,50 €

  In stock
• 

  Angled micro-USB OTG Host Cable Adapter Samsung Galaxy S3 S4 S5 with RTL-SDR

  USB OTG host cable adapter ompatible with Motorola Xoom, Samsung Galaxy S2/S3/S4/S5, Nokia N900/N810, and any other Micro USB devices with USB Host mode support features supported. - Connector Micro

  2,30 €

  Out of stock
• 

  5V 9V or 12V by USB cable with power supply Ripcord

  With the Ripcord USB power cable, you have the freedom to power anywhere you are any device in 5, 9 or 12V from a USB port of a laptop, from an external battery or from a smartphone/tablet (with OTG

  18,50 €

  In stock
• 

  USB 2.0 Micro-USB Male A Cable - Male B Vention

  High-quality USB 2.0 to micro-USB flat cable, Male A - Male B, high-speed.Power cord for Hotspot BlueDV, Raspberry Pi card, phone and smartphone Samsung S3, S4, S5 and any device with micro-USB power

  3,85 € 5,50 € -30%

  In stock