Viewed products
USB power cable for the SDR Ham It Up...
USB power cable for the SDR Ham It Up upconverter card, 1.5m long, to reduce or eliminate interference caused by the computer.
Note: This cable only supplies power to the Ham It Up up-converter from Nooelec up-converter and cannot be used with SDR hardware from SDRPlay.
Reference: ADAPT-SMA-M-UHF-F-67
SMA Male to UHF Female Adapter (SO-239).
Reference: PIGTAIL-MCX-M-SMA-M-52
MCX Male to SMA Male pigtail adapter. Perfect for connecting the DTT dongle RTL3832 to the Ham it Up Ham it Up converter.
Reference: PIGTAIL-SMA-M-UHF-F-80
Adapter cable pigtail SMA Male to plug UHF Female. RG 316 50 ohm coaxial cable. Available in 3 lengths: 15, 50 and 100 cm.
Reference: PIGTAIL-SMA-M-SMA-M-81
SMA Male to SMA Male pigtail adapter, for connecting a card, for example converter Ham it upconverter card to the SDR transceiver HackRF One SDR transceiver, or the SDRPlay broadband receiverwideband
Reference: CABLE-MICRO-USB-BLANC-0451
This USB to micro USB cable measures 1 metre and can be used as a power cable for BlueDV, Raspberry Pi board, Samsung S3, S4, S5 mobile phone or any device with a micro-USB power port. Available in
Reference: CABLE-USB-AB1-NOIR-66
Power and data cable, USB 2.0 Male A - Male B, 1m long. No ferrite.This cable is used to power the SDR HF Ham it up upconverter, for example, and is also compatible for powering and communicating with
Reference: NOO-100768-BOITIER-NOIR-3155
Provides an effective protection against impact and parasites for your converter HF SDR Ham It Up and also gives it a nice looking. The enclosure is made of aluminum and laser engraved, with 2 cutouts
24,90 €
Reference: CABLE-RIPCORD-5V-8005
With the Ripcord USB power cable, you have the freedom to power anywhere you are any device in 5, 9 or 12V from a USB port of a laptop, from an external battery or from a smartphone/tablet (with OTG
18,50 €
Click here to leave a review
Be the first to ask a question about this product!
Nooelec's Ham It Up v1.3 is an up-converter HF, equipped with the 125Mhz filter soldered on the PCB and allows to listen to all MF / HF bands from 0.5 to 50 Mhz, in all modes of modulation, from a
62,50 €tax excl.
This USB to micro USB cable measures 1 metre and can be used as a power cable for BlueDV, Raspberry Pi board, Samsung S3, S4, S5 mobile phone or any device with a micro-USB power port. Available in
1,63 €tax excl.
Power and data cable, USB 2.0 Male A - Male B, 1m long. No ferrite.This cable is used to power the SDR HF Ham it up upconverter, for example, and is also compatible for powering and communicating with
4,17 €tax excl.
Provides an effective protection against impact and parasites for your converter HF SDR Ham It Up and also gives it a nice looking. The enclosure is made of aluminum and laser engraved, with 2 cutouts
10,38 €tax excl.
24,90 € -50%With the Ripcord USB power cable, you have the freedom to power anywhere you are any device in 5, 9 or 12V from a USB port of a laptop, from an external battery or from a smartphone/tablet (with OTG
13,88 €tax excl.
18,50 € -10%USB 2.0 printer cable Male A - Male B, with 2 ferrites to protect against interference and parasites. This cable is used to power and communicate with a printer or scanner, as well as SDR receiver
8,25 €tax excl.
High-quality USB 2.0 to micro-USB flat cable, Male A - Male B, high-speed.Power cord for Hotspot BlueDV, Raspberry Pi card, phone and smartphone Samsung S3, S4, S5 and any device with micro-USB power
1,67 €tax excl.
MLA-30 Plus magnetic loop active antenna for receiving HF bands from 500 kHz to 30 MHz.The MLA-30+ antenna can be used with the RTL-SDR V3 stick in direct conversion mode, with the Ham it up
41,58 €tax excl.
13mm Black Ferrite Choke Balun for EMC Demagnetization Filter Anti-interference Device Clip-on VersionDescription:- It can filter high frequency noise, pulse interference from connection circuits.-
2,40 €tax excl.
7mm Black Ferrite Choke Balun for EMC Demagnetization Filter Anti-interference Device Clip-on VersionDescription:- It can filter high frequency noise, pulse interference from connection circuits.-
1,98 €tax excl.
RF converter (ULF/VLF/LF/MF/HF) for HF frequencies from 0.3 to 65 MHz and SDR (Software Defined Radio) devices such as NESDR keys, RTL-SDR, HackRF, or any VHF or SDR receiver covering the 125MHz to
82,50 €tax excl.
Easy-to-install battery box for Ham It Up upconverter, allowing the converter to operate for extended periods without connection to a power source. DC power from the battery greatly improves the
3,23 €tax excl.
7,75 € -50%The Ham It Up Nano is an HF upconverter that lets you extend the range of your favourite SDR or radio to at least 100kHz. It is compatible with any radio capable of operating on 125MHz-190MHz (to use
66,56 €tax excl.
The Ham It Down is a downconverter capable of converting radio signals from 1.55 GHz to 3.1 GHz in the 50 MHz - 1.6 GHz frequency range and supported by SDR keys such as NESDR and RTL-SDR V3. It
88,44 €tax excl.
124,86 € -15%Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal
Copyright 2014-2025 - Passion Radio / 4 MY PEOPLE.
Les photos et coloris ne sont pas contractuels.