LoRa Gateway 1 channel 868 Mhz for Raspberry Pi

This single-channel LoRa gateway for Raspberry Pi is an inexpensive device to start experimenting with a 868 Mhz LoRa network. It allows to receive LoRa packets on a specific channel and to share them on the network.

Note that LoRa single channel gateways are not fully compatible with LoRaWAN and The Things Network (TTN). They allow to become familiar and learn on LoRaWAN and TTN.

Comes with: 1 single channel LoRa gateway for Raspberry Pi (not inlcu), 1 868 Mhz 9cm antenna. Documentation in English to download below.

Accessories

Raspberry Pi 3 B+ PLUS Quad Core 1.4Ghz WiFi dualband Bluetooth 1GB
The new Raspberry Pi 3 model B & B+ features a 1.4Ghz Quad Core processor, WiFi 2.4Ghz / 5Ghz and Bluetooth Low Energy (BLE), making it even easier to develop RF and IoT radio applications. CPU
48,00 €
Out of stock, available in April 2020!
Raspberry PI 1 model A+ 512Mo 700Mhz
Mini-computer board Raspberry Pi 1 model A+ 512Mo CPU 700Mhz (3rd edition November 2014).CPU: Broadcom processor BCM2835, CPU 700MHz single core ARM1176JZF-SRAM: 512MB SDRAM (400MHz)GPIO extended 40
25,00 €
In stock
PCB antenna 868 MHz Yagi for LoRa SigFox
PCB antenna Yagi 3 elements for 868MHz with a gain of 8dBi, for long-range use on the ISM 868Mhz frequency band and LPWAN / LoRaWan networks (Sigfox, LoRa), RFID UHF and Zigbee. The antenna is
13,23 € 18,90 € -30%
In stock
868 Mhz SMA-M Right Angle Antenna Lorawan Helium
868 Mhz antenna with 2dbi gain, SMA male right angle connector for hardware device on 868Mhz ISM band, for example LoRa / LoRaWan application or Helium network and in a test environment, over short
4,50 €
In stock
Development board ESP32 BLE WIFI OLED Heltec
This development board Heltec WiFi Kit 32 for IoT connected devices is based on the ESP32 microprocessor (32-bit dual-core) and integrates a WIFI 802.11 b/g/n/e/i connection, Bluetooth and a 2.4cm
19,90 €
Out of stock
Long distance range LoRa 100mW Module 433 868 Mhz EBYTE E32
This EBYTE E32 module is a 100mW long range transceiver with UART interface, available in 433Mhz or 868Mhz version and based on SEMTECH chip SX1276 (868Mhz) and SX1278 (433Mhz) for LoRa network and
9,52 € 11,90 € -20%
In stock
TTGO ESP32 DEV Board for Arduino BLE WIFI LCD
TTGO ESP32 T-Display development board for Arduino, based on the ESP32 microprocessor (32-bit dual-core) and integrates a WIFI connection 802.11 b/g/n, Bluetooth and with a 2.4cm LCD screen.Compatible
13,90 €
Out of stock
Arduino ESP32 module GPRS Bluetooth WIFI TTGO
TTGO ESP32 T-Call Arduino module with GPRS and SIM card support, based on the ESP32 microprocessor and with 802.11 b / g / n WIFI connection, Bluetooth and SIM800L SIM GPRS module.Compatible with the
24,90 €
In stock
TTGO T-BEAM LoRa GPS node 433 & 868 Mhz Bluetooth WIFI
This LoRa tracker TTGO T BEAM is an IoT development board for LoRa 433 Mhz or 868 Mhz frequencies (depending on the model), with WIFI 802.11 b / g / n connection, Bluetooth / BLE, 2.4cm OLED display
47,90 €
Out of stock
Outdoor antenna 868 Mhz SMA 4dBi LoRa Helium SIGFOX LoraWan
Omnidirectional vertical fiberglass antenna for outdoor use, transmitting and receiving on the 868Mhz ISM band (e.g. LoRa, LoRawan, Helium HNT hotspot, Sigfox), with 4dBi gain, female SMA connector
46,90 €
In stock
8-channel LoRa 868 Mhz gateway for Raspberry Pi and IoT TTN LoRaWAN network
The IoT LoRa Raspberry Pi HAT allows to create an economical LoRa gateway compatible with The Things Network (TTN) on the ISM Europe 868Mhz band.This HAT for Raspberry Pi allows you to configure your
175,00 €
Out of stock, available within 1 to 2 months