868 Mhz Helical Antenna for LoRa SigFox Zigbee

Antenna 868 MHz with a gain of 2dBi for short-distance use on the ISM 868Mhz frequency band for LoRa, LoRaWan, Sigfox or Zigbee IoT networks. The antenna is soldering on a PCB.

Frequencies: 868-869 MHz
Antenna type: Helical - Polarization: vertical
Gain: 2dBi
SWR: ≤1.5
Impedance: 50 ohms
Network Compatible: Sigfox, LoRa, LoRaWan, Zigbee
Weight: 10 grams

Accessories

PCB Right Angle Connector SMA Female Solder
Right angle RF connector SMA female, to solder on PCB.Frequency of use: From 0 to 3 GhzBrass plated GOLDImpedance: 50 OhmsDimensions : 15,46 x 6 x 6 mmThis RF connector is manufactured in accordance
1,90 €
In stock
Coaxial cable low loss 2X SMA Male
Cable SMA Male to SMA Male with 50-ohm coaxial cable low loss KSR195 for use from 0 to 6GHz.Length: 0,5m (50cm), 1, 3 or 5 metersConnector 1: SMA MaleConnector 2: SMA Male
8,90 €
In stock, send from Europe
Log Periodic Antenna 400-1000MHz 6dBi WA5JVB
PCB Log periodic antenna, for frequency from 400 to 1000MHz with a gain of 6 dBi.Supplied without SMA connector (soldering) or via a coaxial cable soldered directly to the PCB.Frequencies: 400-1000
59,00 €
In stock
PCB antenna 900-930MHz Yagi 3 elements
PCB antenna WA5VJB Yagi 3 elements for 900-930MHz with a gain of 7dBi. The antenna is delivered without connector (solder wire).Frequency: 900-930MHzType: YagiNumber of elements: 3Gain: 7dBiImpedance:
18,50 €
In stock
PCB antenna 868 MHz Yagi for LoRa SigFox
PCB antenna Yagi 3 elements for 868MHz with a gain of 8dBi, for long-range use on the ISM 868Mhz frequency band and LPWAN / LoRaWan networks (Sigfox, LoRa), RFID UHF and Zigbee. The antenna is
18,90 €
Out of stock, pre-order available, delivery June 5, 2015
Bandpass SAW Filter 868 Mhz LoRa SigFox
This filter for the 868 Mhz bandpass improves selectivity and suppresses spurious signals outside the 868Mhz band.Utilization type unlicensed ISM bande 868 Mhz: Sigfox, LoRa, LoRaWAN.Supplied with: 1
27,90 €
In Stock
PCB Straight Connector SMA Female Solder
Straight RF connector SMA female to solder on PCB.Frequency of use: From 0 to 3 GhzBrass plated GOLDImpedance: 50 OhmsDimensions : 13,41 x 6.5 x 6.5 mmThis RF connector is manufactured in accordance
2,00 €
In stock
868 Mhz antenna Stubby SMA Male 2dBi LoRa
Antenna stubby for ISM LoRa 868 Mhz band, 4cm long with 2dbi gain, SMA male connector.Frequencies RX and TX: 868 MhzConnector: SMA maleGain: 2dBiSWR: ≤1.5Polarization Type: VerticalMaximum power:
5,00 €
In stock
LoStik - Open source USB LoRa LoRaWAN TTN
The LoStik dongle is LoRa, LoRaWAN and The Things Network (TTN) compatible, easy to use directly from a PC or Raspberry PI.It enables IoT (Internet of Things) integrators, 868Mhz wireless network
59,00 €
In Stock
Fixed antenna 868 Mhz SMA 2dB LoRa SIGFOX
Fixed vertical fiberglass antenna with mast mounting bracket included, for outdoor use on the ISM 868 Mhz band (LoRa and Sigfox), with a gain of 2db and female SMA connector.This antenna consists of a
39,90 €
In Stock
8-channel LoRa 868 Mhz gateway for Raspberry Pi and IoT TTN LoRaWAN network
The IoT LoRa Raspberry Pi HAT allows to create an economical LoRa gateway compatible with The Things Network (TTN) on the ISM Europe 868Mhz band.This HAT for Raspberry Pi allows you to configure your
175,00 €
Out of stock