



Reference: SIRIO-ABN2-2800
Luggage compartment bracket. Allows the antenna to be fixed to the front bonnet or tailgate. Compatible with all types of vehicles and antennas. Made of steel with anti-corrosion treatment and black
8,08 €
Reference: MOON-56-456-LEAD6-2146
Luxury rubberised microphone cable with 6 conductors (5 + 1 screen), matt black, which tends to be flexible when stretched, making it less likely to break internally. The cable is 3 metres long.
7,90 €
Reference: WIND-FT-818-ANDERSON-CABLE-2395
Windcamp 0.6m in length cable, for YAESU FT-817, FT-818. With Power Anderson connectors.
7,90 €
Reference: ANYTONE-CHARGEUR-757
AC Power charger adapter for Anytone AT-D868UV and AT-D878UV DMR digital radio walkie-talkie. Comes with: 1 Anytone QBC-45L desktop base and 1 charger 220V Anytone QPS-17 with European plug.
7,90 €
Reference: DIAMOND-CR3000-CARTOUCHE-1658
Replacement cartridge for Diamond surge protectors. Compatible with SP-3000P and SP-3000W.
7,90 €
Reference: SIRIO-N-PL-MOUNT-1250
Sirio N-PL Mount with SO-239 base plate for antenna installation in PL-259.N-PL Mount with protective capUp to 100 MHz, mounting hole Ø 12.5 mmUHF-Female antenna mount (SO-239)Total size: Ø 42
7,90 €
Reference: TYT-CABLE-PROG11-UV88-1057
USB programming cable for the TYT TH-UV88 walkie-talkie and all analog TYT and Baofeng walkie talkie with 2-pin connectors.This USB cable allows you to easily and quickly program from a PC the
7,90 €
Reference: TYT-BATTERIE5-UV88-1059
Genuine TYT battery with a capacity of 1400mAh, for the TYT TH-UV88 FM analog walkie-talkie and also Retevis RT85. Autonomy : 8 to 10 hours Battery available in High-Capacity 3200 mAh, and compatible
7,90 €
Reference: KOM-PL-23-TG-1200
PL-female for RG-213/H-1000 / H-2000-Flex /AIRCOM-PLUS/ECOFLEX-10 / ULTRAFLEX-10 / H-2010 / CALORIX-10 / HYPERFLEX-10/ LMR400 (GOLD CONTACT PIN)
7,73 €
Reference: MOON-09-162-DIPOLE-2100
DPC-W Centre for dipole and antenna construction G5RV twin lead 300 or 450 OHMS. Connection: Direct open feed for a 300 or 450 ohm twin lead.
7,58 €
Reference: TYT-CIGARE3-UV88-1060
Power cable cigarette lighter socket, genuine TYT for the TH-UV88 walkie talkie also compatible with Retevis RT85.This is not a battery charger, it is a battery eliminator that replaces the existing
7,50 €
Reference: ANYTONE-CIGARE-BAT-CPS02-718
Anytone official battery-eliminator for car and Anytone AT-D868UV or AT-D878UV DMR digital mobile radio.It is a cable that powers the Anytone AT-D868 or D878 UV walkie talkie directly from a 12V
7,90 €
Reference: SIRIO-BASE-NC-DV-CHROME-1249
Sirio N-Mount DV Chrome mounting bracket. Frequency range: from DC to 300 MHz Overall size: Ø 41 mm Mounting hole: Ø 12.5 mm Materials: Chromed brass, Nylon, Rubber Comes with: 1 N-mount Chrome Sirio
7,00 €
Reference: RFKONNECT-G20MM81T616-2226
High quality 4:1 black adhesive heat shrink tube 1M x 20MM Insulation tube for wire protectionDescription:- High temperature 4:1 heat shrink, fully bonded to the wire with effective insulation
6,96 €
Reference: ELECROW-ACC03000B3-3178
This high-performance directional antenna is specifically designed for long-range LoRa communications in the 868 MHz and 915 MHz bands. Its unique foldable 'paddle' design allows for precise alignment
6,90 €
Reference: PNI-SPA135-2684
The PNI SPA135 bracket is a 5mm-thick stainless steel bracket for mounting the radio antenna on a metal or roof bar, or on the bar of a rear-view mirror (4x4, truck, machine). Ideal for fixed DV or PL
6,90 €
Reference: PNI-R150-2318
The PNI R150 coaxial cable with PL / PL adapters has a multitude of applications in the CB band, far beyond its simple use to connect a radio station to a measuring device (such as a SWR power sensor)
6,90 €
Reference: ELECROW-ACC03000B1-3177
This high-performance directional antenna is specially designed to optimize long-range LoRa connections. Its paddle-shaped design and 90° folding joint allow for precise signal alignment, ensuring
6,90 €
Reference: WIND-IC-705-DC-CABLE-2391
Windcamp Cable specially designed for ICOM IC-705 radios, with a length of 1 meter, this cable ensures a reliable, solid connection between your radio and other compatible devices.
6,90 €
Reference: MASTRANT-BRACKET-ACM2-1932
Mastrant MA2 stainless steel universal mast fixing kit bracket.Very strong and durable (AISI 316 stainless steel screws, nuts and washers, AISI 304 brackets). Holds the mast at 6 or 8 points.The
6,72 €
Reference: MASTRANT-BRACKET-ACM1-1930
Bracket for universal mast fixing kit in stainless steel. Made in the Czech Republic according to Mastrant's original design.Very strong (thickness 4 mm ... 5/32", screws M8 ... 5/16" length 60 or 100
6,55 €
Reference: CABLE-TYT-MD9600-602
TYT original 12V power cable for MD-9600.
6,50 €
Reference: SIRIO-ASP-1-CHROME-1253
Antenna mounting bracket, on mirror rod, Sirio ASP-1 Chrome. Maximum mounting diameter Ø 16 mm, in galvanized steel. Supplied with: 1 Sirio ASP-1 Chrome.
6,50 €
Reference: PNI-CA-3P-2316
The CA-3P PNI cable enables the CB Station to be powered directly from the car battery or via the cigarette-lighter socket (cigarette-lighter socket not included).length: 2 metres 3-pin plug safety:
6,48 €
Reference: MASTRANT-PULL-APUS03A-1924
Plastic and stainless steel pulley Ø 16 mm, for rope diameters up to 3 mm, suitable for wire antennas.Highly stressed sliding bearing with cheek pieces made of high-quality, UV-resistant materials.
5,96 €
Reference: MOON-50-059-ADAPT-2124
PMR aerial socket adapter for BNC female Suitable for : HT600,HT750,HT1250,HT1550, Saber, MT1000, MX1000, GP1280, GP140, GP2000, GP300, GP320, GP340, GP380, GP640, GP68, GP680,etc Kenwood : TK-230,
5,90 €
Reference: TYT-ANT-UV88-1896
Original dual band VHF/UHF antenna for TYT TH-UV88, 14 cm, SMA male connector.
5,90 €
Reference: PNI-PL-DV-2672
The PNI PL-DV adapter enables DV-mounted antennas to be mounted on PL brackets. The adapter is compatible with PNI T941 for mounting the antenna on the trunk or with PNI T601 cable for feeding
5,90 €
Reference: PNI-R50-2319
The PNI R50 coaxial cable with PL / PL adapters has a multitude of applications in the CB band, far beyond its simple use to connect a radio station to a measuring device (such as an SWR power sensor)
5,90 €
Reference: PNI-CA-6500-2317
The PNI CA-6500 cable is primarily designed to supply power to the CB radio stations PNI HP 6500, PNI HP 9500 from the car battery (12V or 24V).length: 2 metres safety: 3A compatible with : PNI HP
5,90 €
Reference: RFKONNECT-RG58SO239-81T603-2212
0.3M UHF Male Connector to UHF Male Connector Adapter Cable RG58 Feeder Line RF Coaxial SL16 Extender CableIncluded in the package:- 1 x Adapter Cable
5,88 €
Reference: SIRIO-CABLE-NE-MOUNT-1256
Sirio coaxial cable for NE-Mount. RG58, 400cm for Sirio NE-Mount with bare end without connector. Coaxial cable RG58, 50 Ohm, Cable for Sirio NE-Mount and Sirtel XVS-Mount. Supplied with: 1 Sirio
7,50 €
Reference: KOMUNICA-G-BK1500-18
Rubber protection for Komunica BK-1500 magnetic base with 150cm diameter.
5,15 €
Reference: ANYTONE-CIGARE-CPL01-717
Anytone official cigarette lighter 12V power cable compatible with the Anytone AT-D868UV and AT-D878UV DMR digital radio walkie-talkie.It is a cable that powers the charging base of Anytone AT-D868 UV
5,90 €
Reference: YAESU-SHB-11-1371
Yaesu SHB-11 belt clip compatible with Yaesu FTA-750L, FTA-550L, FTA-550AA and FTA-450L walkie talkies.
7,00 €
Reference: RFKONNECT-PINCE-81T638-2238
170 Diagonal pliers with shiny blue handle High-quality, portable industrial levelling pliers for PLATOIncluded in the package:- 1 x Diagonal pliers
4,92 €
Reference: RFKONNECT-PINCE-81T633-2235
Multifunctional coaxial cable stripper Portable twin-blade stripper- Twin-blade design. allows blade depth adjustment.- Integrated hexagonal key- Mini size. easy to carry- Wear-resistant blade. allows
4,92 €
Reference: MASTRANT-TEE-ASHE06-1918
Tensioner for guy ropes with double eyelet (diameter 10 to 16 mm) in stainless steel for easy installation. For the calculation of the maximum static load, we recommend 30% of the breaking load (BS).
4,71 €
Reference: MASTRANT-TEH-ASHH06-1919
Tensioner for guy wires with hook and eye (diameter from 10 to 16 mm) in stainless steel for easy assembly.Strength: 1100 daN, ~kg Working load 80 daN, ~kg
4,71 €
Reference: NOO-100763-BATT-2435
Easy-to-install battery box for Ham It Up upconverter, allowing the converter to operate for extended periods without connection to a power source. DC power from the battery greatly improves the
7,75 €
Reference: PIGTAIL-BNC-M-MCX-M-295
Pigtail MCX Male to BNC Male adapter. RG 316 50 ohm coaxial cable, approx. 15 cm long.
7,68 €
Reference: CABLE-COAXIAL-UHF-M-NU-950
Low-loss 50 ohm coaxial cable KSR195 5mm, for use from 0 to 6Ghz and with a UHF Male connector (PL-259) on one end and without connector on the other (bare end to be soldered or crimped). Length:
6,90 €
In stockReference: QO100-BAGUE4-207245-23MM-1111
This ring makes it possible to reduce and offset a diameter of 40mm to a diameter of 23mm.thanks to its off-center center, this ring allows the antenna to be offset in order to better illuminate the
6,90 €
Reference: PIGTAIL-UHF-M-MCX-M-296
UHF Male to MCX Male adapter. The MCX connector is compatible with the DVB-T USB dongle. RG 316 50 ohm coaxial cable, approx. 15cm long.
6,20 €
Reference: PIGTAIL-F-15CM-737
Pigtail F Male to F Male adapter cable with RG316 coaxial cable, 50 Ohms, available in 15cm and 50cm. The F connector is particularly used for satellite equipment.
6,10 €
Reference: TTGO-ECRAN-L206-2417
OLED LILYGO screen compatible with TTGO T-BEAM and T-SIM development boards.Screen type: OLED Size: 0.96 inches Resolution: 128*64 Colour: White Viewing angle: > 160 Driver IC: SSD1306 Power
5,71 €
In stockReference: ADAPT-F-M-BNC-F-733
RF adapter for F male to BNC female connector. The F connector is particularly used for satellite equipment.
5,10 €
Shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal
Copyright 2014-2026 - Passion Radio / 4 MY PEOPLE
Les photos et coloris ne sont pas contractuels.