



Reference: WIND-IC-705-ANDERSON-CABLE-2392
1.0m in length, for ICOM IC-705 and Power Anderson compatible cable.
9,90 €
Reference: ANT-GPS-81T402-886
Active GPS antenna (ceramic) with LNA, magnetic support, RG174 coaxial cable with male SMA connector. This active antenna can be used with any equipment fitted with an SMA connector and a 3.3V Bias-T
9,90 €
Reference: TYT-CIGARE2-MD390-412
Plug power cable 12v/24v car power, genuine TYT and compatible with the walkie-talkie radio digital DMR TYT MD-390. This is a battery eliminator for powering the portable TYT MD-390, in car and
9,90 €
Reference: TYT-OREILLETTE-MD380-348
Genuine TYT earpiece with remote microphone (micro-headset) for TH-UV88 FM analog walkie-talkie, Retevis RT85 and digital radio handheld DMR TYT MD-380 and MD-390. The point to point spacing between
9,90 €
Reference: RFKONNECT-PEDALE-PTT-3071
Universal foot switch for activating PTT transmission by foot, without having to touch the microphone. Its non-slip metal casing ensures reliability and long life.PTT foot switch: keeps your hands
9,90 €
Reference: CABLE-COAXIAL-SMA-COUDE-1M-932
KSR195 low-loss 50-ohm coaxial extension cable for use from 0 to 6Ghz, with angled SMA connector and straight male SMA connector.Available lengths: 50cm, 80cm, 1, 2, 5 and 10 meters Connector 1: SMA
In stock
Reference: RF-KONNECT-DONUTAM-87T295-3006
TheAM loop-donut antenna covers a frequency range of 500 to 2000 kHz, and is compatible with an SDR receiver, Malachite, Malahit or other receiver for indoor reception. High-impedance (Hi-Z)
9,90 €
Reference: RF-KONNECT-87T298-SPF5189Z-833
This SPF5189Z LNA preamp improves reception performance from 50 Mhz to 4000 Mhz, based on SPF5189Z, with a noise factor of 0.6 dB and a maximum gain of approximately 20dB.This low noise amplifier is
9,90 €
Reference: SIRIO-SUPPORT-M1-657
Stainless steel mounting bracket SIRIO M-1. Allows the installation of mobile or portable antenna. Size: 3,8 x 6,4 x 9,9 cm. Delivered with: 1 bracket only SIRIO M-1, without base or coaxial cable
9,90 €
Reference: UNIDEN-WZ1628-1571
Genuine cigarette lighter socket for Uniden BCT15X and SDS200E mobile scanners.12 Volt DC power cord With cigarette lighter plug 5.5 mm connector. For use with : Uniden BCT15X, SDS200E and others.
9,90 €
Reference: UNIDEN-CABLE-USB2-630
USB programming cable for UNIDEN scanner UBC75XLT and UBC125XLT. This USB cable is used to charge the battery of the Uniden scanner and program it from a PC. Supplied with: UNIDEN USB-2 cable,
9,90 €
Reference: ANYTONE-CABLE-USB-PC04-756
Programming USB cable genuine Anytone for walkie-talkie DMR Anytone AT-D868UV and AT-D878UV. Comes with : 1 genuine Anytone PC-04 USB cable without CD (software and drivers to download below).
9,90 €
Reference: WIND-IC-705-VEHICLE-CABLE-2393
1.5m in length, for vehicle power cigar-lighter socket to supply of ICOM IC-705.
9,90 €
Reference: SIRIO-BASENPL-CCNS-1254
Sirio N-Mount cable with NC579. RG58, 400cm, PL / No Connector. Coaxial cable RG58 Black, 50 Ohm. Length: 400 cm. Connectors: N-Mount connector (NC579) / No connector. Supplied with: 1 Sirio N-Mount
9,80 €
Reference: NAGOYA-AT805-MALE-409
Rigid mini-antenna for 144/430/1200MHz, 5cm long with 0dbi gain, SMA male or female connector, suitable for DV Mega, BlueDV pack, DV4mini and all VHF-UHF walkie-talkies with SMA.Frequencies: VHF
9,77 €
Reference: MOON-09-163-DIPOLE-2260
Moonraker DPC-S straight dipole centre with SO239 for building wire antennas in the HF and VHF bands.Connector: SO239 (UHF female) Power : 500W
9,74 €
Reference: CABLE-RG58-BNC-UHF-50CM-1117
Coaxial patch cable with BNC Male - UHF Male connector (PL-259) with RG58 MIL-C-17 50 ohm coaxial cable for use in frequencies from 0 to 1000Mhz. Available in different lengths: 50cm, 1m or 2 metres.
In stock
Reference: CORDON-RG58-BNC-30CM-1115
Coaxial patch cable with BNC Male connector - BNC Male with RG58 MIL-C-17 50 ohm coaxial cable for use in frequencies from 0 to 1000Mhz. Available in different lengths: 30cm, 50cm, 1m or 2 metres
In stock
Reference: SIRIO-BASESO239-2808
Female PL socket (SO239) usable up to 500 MHz. No coaxial cable required.
9,00 €
Reference: CABLE-RG58-BNC-SMA-50CM-1116
Male coaxial cable with BNC connector - Male SMA with 50 ohm RG58 MIL-C-17 coaxial cable for use in frequencies from 0 to 1000Mhz. Available in different lengths: 50cm, 1m or 2 metres. Connector 1:
In stock
Reference: RFKONNECT-PCB-DEMO-KIT2-1077
This NanoVNA RF demo kit is composed of a PCB to assemble, to perform tests or demonstration of RF integrated circuit (DIP) and SMT (SMT) components.Adapted to work with vector network analyzer
8,90 €
Reference: SIRIO-ADAPT-PLDV-UHF-M-1892
Adapter for DV to PL259 mounting (UHF male)
8,90 €
Reference: UNIDEN-AD1239-629
Genuine Uniden AD-1239 cigarette lighter socket for Uniden UBC75XLT UBC125XLTportable scanner and SDS100E, UBCD3600XLT and many others USB device with mini-USB.
8,90 €
Reference: TYT-CABLE-USB-TYT-345
Programming cable genuine TYT only compatible with walkie-talkie radio digital DMR TYT MD-280, MD-380, MD-390 and MD-446. BE AWARE: This cable is not compatible with the TYT TH-UV88 FM analog walkie
8,90 €
Reference: RFKONNECT-TROUSSE-81T658-2244
25 pieces screwdriver sets Omnipotent Repair Tool for Electronics Maintenance with Aluminum Handle and Carbon Steel HeadApplication:- Hamradio, homebrew, mobile phone. camera. fans. laptop. toys.
8,88 €
Reference: RFKONNECT-GAINE-81T405-2195
Packaged box DIY Heat Shrink Tube Insulation Sleeve for Electric Wire and Cable Flame Retardant Shrink TubeMethod of use:- Prepare the tools- Insert the wires to be connected into the heat-shrink
8,88 €
Reference: KOM-UG-UHF-NEOSPECIAL-1199
PL male (UHF-male) for coaxial cable RG-213 / H2000 / AIRCOM / LMR400 / HYPERFLEX-10For 10 to 11 mm cable.
8,76 €
Reference: MOON-09-165-G5RVES-2118
Ideal for making a G5RV or long-wire antenna.SO239 End of line plug For use with a 300 or 450 Ohm twin lead 25mm diameter 112mm long with socket Maximum power 100W continuous and 200W PEP
8,62 €
Reference: MASTRANT-CAT-CL828-63 -1923
Black aero cleat tensioner with blocker for 3 to 4 mm diameter rope UV stabilised nylon. The Clamcleat® CL828-70 cleat is made of Micros Aero alloy and has a rigging spout with a 4:1 ratio. The
8,51 €
Reference: MOON-50-066-ADAPT-2135
PL259 to 3/8 adaptor for use with SO239 brackets or fittings to convert 3/8th thread antennas
8,50 €
Reference: RFKONNECT-QO100-BIAS-T2-1267
This BIAS-TEE module can be used to power an RF accessory such as an LNA preamp preamplifier or a LNB PLL 10Ghz to receive QO100. Power is supplied via an external DC power supply (30V max.) by
8,50 €
Reference: DIAMOND-CR1000-CARTOUCHE-1541
Replacement cartridge for Diamond surge arrester. Compatible with SP-1000 and SP-1000PW.
8,50 €
Reference: NAGOYA-NW-2458-02-1065
11cm WIFI antenna with a gain of 2dbi for the 2.4 Ghz and 5 Ghz wifi bands, with RP-SMA male reverse connector for dual-band wifi device and router (2G and 5G).Comes with: 1 original Nagoya NW-2458 2G
8,30 €
Reference: UNIDEN-WA952-627
Genuine Uniden cigarette lighter socket for Uniden UBC355CLT mobile scanner.
8,90 €
Reference: RFKONNECT-OREILLE1-81T629-2233
Acoustic tube walkie-talkie earphones with K-port, 3D stereo and intelligent noise reduction function- The white porcelain horn does not generate electric current or other noisy sounds, making the
8,88 €
Reference: PNI-HF34-2321
The PNI HF34 headset is equipped with a Midland-type 2-pin connection socket, making it compatible not only with PNI brand products, but also with Midland and other brand products, whether CB or PMR.
8,64 €
Reference: RFKONNECT-PCB-ATTENUATEUR-1011
This PCB-based RF attenuator module reduces the power of a radio signal by -10 to -30dB, with a maximum input power of 23dBm (200Mw), with female SMA connector, for use from 0 to 4000Mhz (4Ghz).
8,90 €
Reference: CABLE-COAX-F-M-SMA-2M-8752
F Male to SMA Male coaxial cable, with RG58 coaxial cable, 50 Ohms, available in 1, 2, 5 or 10m. The F connector is mainly used for TV and satellite equipment.
11,40 €
Reference: BOITIER-RASPBERRY4-ROUGE-9102
Professional grade ABS housing designed specifically for the Raspberry Pi 4 Model B. It protects the Raspberry Pi 4 while allowing full access to all pins and ports, with ventilated base for passive
8,90 €
Reference: BOITIER-RASPBERRY-BLANC-70
Official case for Raspberry Pi 3, with removable lid and removable GPIO for easy access to the 40-pin GPIO port. Compatible with Raspberry Pi 3 Model B and B+ (Plus). Dimensions: 96x70x25mm
8,90 €
Reference: PIGTAIL-MCX-15MM-557
MCX Male to MCX Male adapter. The MCX connector is compatible with the DVB-T USB dongle USB Dongle and the QRP X5105 for use as a panadapter. RG 316 50 ohm coaxial cable. Available in 15cm, 50cm or 1
8,16 €
Shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal
Copyright 2014-2026 - Passion Radio / 4 MY PEOPLE
Les photos et coloris ne sont pas contractuels.