Nooelec PCB Patch antenna for Inmarsat L-band application (Inmarsat AERO / STD-C) and satellites on 1550 Mhz. The antenna is delivered with female SMA connector soldered on the PCB.
The antenna works equally well for right circular polarization (RHCP) and linear signals, over the entire frequency range of Inmarsat.
Center frequency: 1550 MHz
Impedance: 50 ohms
Dimensions: 95mm x 79mm
Weight: 20 grams
Be the first to ask a question about this product!
Pigtail RF adapter SMA Male to SMA Male to connect for example a converter Ham it up to a HackRF One, or SDRPlay, and any device with a SMA female connector. Coaxial cable RG 316 50 ohms. Available
This RF adapter converts a SMA male connector to a SMA Male connector. Suits for WIFI devices and application.
Cable SMA Male to SMA Male with 50-ohm coaxial cable low loss KSR195 for use from 0 to 6GHz.Length: 0,5m (50cm), 1, 3 or 5 metersConnector 1: SMA MaleConnector 2: SMA Male
This LNA and SAW filter from Nooelec is specially designed to operate on 1.5Ghz Outernet frequency band and for Inmarsat radio applications, covering from 1.50GHz to 1.58GHz. It significantly
Coaxial cable 50 ohms low loss KSR195 5mm, for use from 0 to 6Ghz and with an SMA Male connector at one end and without connector at the other end (bare end to be welded or crimped).Length: Available
This wide-band LNA preamp improves reception performance from 50 Mhz to 4 Ghz, it is based on SPF5189Z, with a noise factor of less than 1 dB.This LNA is designed to be powered by BIAS-T with a power
Wide-band LNA preamp, based on PGA-103+, to improve reception performance from 50 Mhz to 1500 Mhz, with a maximum gain of 20-24dB and a noise factor of 0.4dB.This VHF-UHF LNA offers a very good
This SPF5189Z LNA preamp improves reception performance from 50 Mhz to 4000 Mhz, based on SPF5189Z, with a noise factor of 0.6 dB and a maximum gain of approximately 20dB.This low noise amplifier is
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal