Ettus official protective metal case for the...
Ettus official protective metal case for the USRP B200 MINI SDR transceiver. This enclosure kit allows users to assemble a steel case to protect the B200MINI board-only device, and increases operating temperature range from 0–40 °C to -20 – 60 °C. (C-Grade)
Comes with: Case for Ettus USRP B200mini only (top enclosure, bottom enclosure, adhesive feet, screws, nuts and washers, torx key and assembly guide.
Telescopic antenna ANT500, VHF-UHF 50 ohms designed to operate in RX from 75 MHz to 1 GHz. Configurable length of 20 cm to 88 cm. Stainless steel SMA male connector and elbow swivel 360 °. This is an
SMA Male to UHF Male Adapter. RG 316 coaxial cable 50 ohms, about 15cm long.
Pigtail RF adapter SMA Male to SMA Male to connect for example a converter Ham it up to a HackRF One, or SDRPlay, and any device with a SMA female connector. Coaxial cable RG 316 50 ohms. Available in
Dual band directional antenna Original Diamond SRH-789 with SMA Male connector, for receiving and transmitting on VHF-UHF bands (144/430 MHz) and reception on aviation bands 120/150/300/450/800 MHz
This RF adapter allows is equipped with an SMA Male connector on both sides.It allows to connect for example 2 cables or connectors in SMA female.
SDR Transceiver wide-band from 70 MHz to 6 GHz without gap and with 56 MHz of instantaneous bandwidth on the screen. The Ettus USRP B200 MINI operates in full duplex mode and is powered by USB 3.0
This directional Log Periodic antenna is designed in PCB and operates from 850MHz to 6,5GHz with 5-6 dBi gain. Works with Ettus USRP B200mini and all equipment operating in this frequency range. The
Case for transverter Nuand XB200.
PCB Log periodic antenna, for frequency from 400 to 1000MHz with a gain of 6 dBi.Supplied without SMA connector (soldering) or via a coaxial cable soldered directly to the PCB.Frequencies: 400-1000
This antenna Nagoya NA-707 is tilting and telescopic (61cm unfolded, 15,8cm folded), for effective reception from 80Mhz to 1000Mhz (announced RX from 1.8Mhz to 1800Mhz by the manufacturer), and can be
The SDRPlay RSP2 PRO receiver covers from 1kHz to 2 GHz (without gap). With metal case, TCXO 0.5PPM, MW/FM notch filter and 88-108Mhz FM radio rejection, 24MHz clock function and 4.7V Bias-T power
Be the first to ask a question about this product!
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal