PCB antenna Yagi 3 elements for 868MHz with a gain of 8dBi, for long-range use on the ISM 868Mhz frequency band and LPWAN / LoRaWan networks (Sigfox, LoRa), RFID UHF and Zigbee.
The antenna is delivered without connector (solder wire).
Number of elements: 3
Impedance: 50 ohms
Compatible: Sigfox, LoRa, RFID UHF and Zigbee
Amateur radio design: G8EMY & G4DDK
Weight: 39 grams
Right angle RF connector SMA female, to solder on PCB.Frequency of use: From 0 to 3 GhzBrass plated GOLDImpedance: 50 OhmsDimensions : 15,46 x 6 x 6 mmThis RF connector is manufactured in accordance
Cable SMA Male to SMA Male with 50-ohm coaxial cable low loss KSR195 for use from 0 to 6GHz.Length: 0,5m (50cm), 1, 3 or 5 metersConnector 1: SMA MaleConnector 2: SMA Male
PCB Log periodic antenna, for frequency from 400 to 1000MHz with a gain of 6 dBi.Supplied without SMA connector (soldering) or via a coaxial cable soldered directly to the PCB.Frequencies: 400-1000
PCB antenna WA5VJB Yagi 3 elements for 900-930MHz with a gain of 7dBi. The antenna is delivered without connector (solder wire).Frequency: 900-930MHzType: YagiNumber of elements: 3Gain: 7dBiImpedance:
This filter for the 868 Mhz bandpass improves selectivity and suppresses spurious signals outside the 868Mhz band.Utilization type unlicensed ISM bande 868 Mhz: Sigfox, LoRa, LoRaWAN.Supplied with: 1
Straight RF connector SMA female to solder on PCB.Frequency of use: From 0 to 3 GhzBrass plated GOLDImpedance: 50 OhmsDimensions : 13,41 x 6.5 x 6.5 mmThis RF connector is manufactured in accordance
Helical antenna 868 MHz with a gain of 2dBi for short-distance use on the ISM 868Mhz frequency band for LoRa, LoRaWan, Sigfox, Zigbee or Helium IoT devices. The antenna is soldering on a
868 Mhz antenna with 2dbi gain, SMA male right angle connector for hardware device on 868Mhz ISM band, for example LoRa / LoRaWan application or Helium network and in a test environment, over short
Antenna stubby for ISM LoRa 868 Mhz band, 4cm long with 2dbi gain, SMA male connector.Frequencies RX and TX: 868 MhzConnector: SMA maleGain: 2dBiSWR: ≤1.5Polarization Type: VerticalMaximum power:
The LoStik dongle is LoRa, LoRaWAN and The Things Network (TTN) compatible, easy to use directly from a PC or Raspberry PI.It enables IoT (Internet of Things) integrators, 868Mhz wireless network
The IoT LoRa Raspberry Pi HAT allows to create an economical LoRa gateway compatible with The Things Network (TTN) on the ISM Europe 868Mhz band.This HAT for Raspberry Pi allows you to configure your
Sirio UHF WY400 antenna for fixed base station for the UHF 400-470 MHz band (to be adjusted), Yagi directive antenna 6 or 10 elements , maximum power of 150 Watts, with N-Female connector. For use on
Be the first to ask a question about this product!
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal