PCB Log periodic antenna, for frequency from 850MHz to 6.5GHz with a gain of 6 dBi.
Supplied without SMA connector (soldering) or via a coaxial cable soldered directly to the PCB.
Frequencies: 850-6500 MHz
Type: Periodic Log
Impedance: 50 ohms
Amateur radio design: WA5VJB
Weight: 33 grams
Right angle RF connector SMA female, to solder on PCB.Frequency of use: From 0 to 3 GhzBrass plated GOLDImpedance: 50 OhmsDimensions : 15,46 x 6 x 6 mmThis RF connector is manufactured in accordance
Pigtail RF adapter SMA Male to SMA Male to connect for example a converter Ham it up to a HackRF One, or SDRPlay, and any device with a SMA female connector. Coaxial cable RG 316 50 ohms. Available in
The LNA4ALL is a pre-amplifier and a low-pass filter (LNA) with SMA female RF connectors and for RF frequencies covering all bands from 28MHZ to 2500 MHz. It improves greatly reception performance, on
This RF adapter allows is equipped with an SMA Male connector on both sides.It allows to connect for example 2 cables or connectors in SMA female.
Cable SMA Male to SMA Male with 50-ohm coaxial cable low loss KSR195 for use from 0 to 6GHz.Length: 0,5m (50cm), 1, 3 or 5 metersConnector 1: SMA MaleConnector 2: SMA Male
Omnidirectional antenna with ground plane (GP) to receive ADS-B between 1030 and 1090 MHz. The antenna is supplied without cable and no assembly. This antenna has a diode protection against
PCB Log periodic antenna, for frequency from 400 to 1000MHz with a gain of 6 dBi.Supplied without SMA connector (soldering) or via a coaxial cable soldered directly to the PCB.Frequencies: 400-1000
Discone Antenna SIRIO SD 3000 N, broadband covering all frequencies in RX from 300 to 3000 MHz and in TX fro amateur bands 70cm, 23cm, with N female connector. Compact size of 72,5cm of height and
MMIC prototype circuit on PCB for connection with SMA connectors (available as an option below).Supplied without SMA connector (solder).Fits standard SMA PCB connectors, including with SMA
Straight RF connector SMA female to solder on PCB.Frequency of use: From 0 to 3 GhzBrass plated GOLDImpedance: 50 OhmsDimensions : 13,41 x 6.5 x 6.5 mmThis RF connector is manufactured in accordance
Nooelec PCB Patch antenna for Inmarsat L-band application (Inmarsat AERO / STD-C) and satellites on 1550 Mhz. The antenna is delivered with female SMA connector soldered on the PCB.The antenna works
Be the first to ask a question about this product!
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal