No products
Viewed products
IoT development board for the LoRa 433 MHz ISM...
-5%
IoT development board for the LoRa 433 MHz ISM band and the LoRa amateur radio band, with 802.11 b/g/n WIFI connection , Bluetooth/BLE 4.2, soldered 2.4cm OLED display, GPS module and battery holder (battery not included).
With Meshtastic.org firmware loaded.
Supplied with: 1 TTGO T-BEAM 1.2 Meshtastic module, 1 433 MHz antenna, 2 headers (soldered), 1 OLED screen (soldered). Battery and USB cable not included.
Documentation on the Meshtastic firmware is available on Github: https: //github.com/meshtastic
Reference: NAGOYA-UT-433-2-MAG-18CM-280
Antenna high performance with a gain of 2dbi and SMA male connector for 433Mhz device and application Frequencies: 433Mhz +/-15MhzConnector: SMA male Length: 18 cmCable length: 3 meters Package
16,70 €
Reference: PIGTAIL-SMA-M-UHF-F-80
Adapter cable pigtail SMA Male to plug UHF Female. RG 316 50 ohm coaxial cable. Available in 3 lengths: 15, 50 and 100 cm.
Reference: TTGO-LORA868-PAX1-Q168-897_8
This LoRa tracker is an IoT development board for LoRa 433 Mhz or 868 Mhz frequencies (depending on the model), with LoRaWAN enabled and WIFI 802.11 b/g/n connection , Bluetooth/BLE, 2.4cm OLED
36,48 €
Reference: SIRIO-FIXE-SO437-N-1131
Sirio SO 437 N antenna for fixed base station for the UHF band 430-450 MHz, omnidirectional antenna with a gain of 2.15 dBi and a maximum power of 20 Watts, with N-Female connector.For use on the 70cm
36,90 €
Reference: NAGOYA-UT-433-2-MAG-18CM-280
Antenna high performance with a gain of 2dbi and SMA male connector for 433Mhz device and application Frequencies: 433Mhz +/-15MhzConnector: SMA male Length: 18 cmCable length: 3 meters Package
16,70 €
Reference: MINI-ANT-433-ANGLE-323
433Mhz mini antenna (for e.g. DMR, D-Star, P25 or C4FM) with 2dbi gain, right-angle male SMA connector for UHF devices operating from 428Mhz to 438Mhz. Frequencies: 433Mhz +/-5MhzConnector:
Reference: NAGOYA-NA-433-532
Nagoya antenna for 433Mhz activity with a gain of 2dbi and SMA male connector for UHF device from 418Mhz to 438Mhz. Frequencies: 433Mhz +/-5MhzConnector: SMA male Length: 17cm Package include: 1
10,65 €
Reference: CABLE-VENTION-VASA08-USB25-8511
High-quality USB 2.0 to micro-USB flat cable, Male A - Male B, high-speed.Power cord for Hotspot BlueDV, Raspberry Pi card, phone and smartphone Samsung S3, S4, S5 and any device with micro-USB power
Antenna high performance with a gain of 2dbi and SMA male connector for 433Mhz device and application Frequencies: 433Mhz +/-15MhzConnector: SMA male Length: 18 cmCable length: 3 meters Package
13,22 €tax excl.
16,70 € -5%433Mhz mini antenna (for e.g. DMR, D-Star, P25 or C4FM) with 2dbi gain, right-angle male SMA connector for UHF devices operating from 428Mhz to 438Mhz. Frequencies: 433Mhz +/-5MhzConnector:
3,75 €tax excl.
Nagoya antenna for 433Mhz activity with a gain of 2dbi and SMA male connector for UHF device from 418Mhz to 438Mhz. Frequencies: 433Mhz +/-5MhzConnector: SMA male Length: 17cm Package include: 1
8,43 €tax excl.
10,65 € -5%High-quality USB 2.0 to micro-USB flat cable, Male A - Male B, high-speed.Power cord for Hotspot BlueDV, Raspberry Pi card, phone and smartphone Samsung S3, S4, S5 and any device with micro-USB power
1,67 €tax excl.
Arduino TTGO ESP32 T-Call V1.4 module with GPRS and SIM card support, based on the ESP32 microprocessor and with WIFI 802.11 b/g/n connection , Bluetooth 4.2 and GPRS SIM800H module. Compatible with
27,63 €tax excl.
34,90 € -5%This LoRa tracker is an IoT development board for LoRa 433 Mhz or 868 Mhz frequencies (depending on the model), with LoRaWAN enabled and WIFI 802.11 b/g/n connection , Bluetooth/BLE, 2.4cm OLED
28,88 €tax excl.
36,48 € -5%This TTGO T BEAM V1.0 LoRa tracker is an IoT development board for LoRa 433 Mhz or 868 Mhz frequencies (depending on the model), with 802.11 b/g/n WIFI connection , Bluetooth/BLE, 2.4cm OLED screen
37,92 €tax excl.
47,90 € -5%Sirio SO 437 N antenna for fixed base station for the UHF band 430-450 MHz, omnidirectional antenna with a gain of 2.15 dBi and a maximum power of 20 Watts, with N-Female connector.For use on the 70cm
29,21 €tax excl.
36,90 € -5%OLED LILYGO screen compatible with TTGO T-BEAM and T-SIM development boards.Screen type: OLED Size: 0.96 inches Resolution: 128*64 Colour: White Viewing angle: > 160 Driver IC: SSD1306 Power
4,52 €tax excl.
5,71 € -5%IoT development board for the LoRa 868 MHz ISM band, with 802.11 b/g/n WIFI connection , Bluetooth/BLE 4.2, soldered 2.4cm OLED display, GPS module and battery holder (battery not included). With
47,12 €tax excl.
59,52 € -5%LILYGO TTGO T-Echo is the advanced version of the T-BEAM development board, and has been optimised for Bluetooth and power consumption, thanks to Meshtastic firmware optimisation and the use of the
78,91 €tax excl.
99,68 € -5%The LILYGO TTGO T-TWR PLUS 2.0 is an ESP32-S3 development board with an integrated VHF or UHF walkie-talkie module and support for Wi-Fi 4, Bluetooth 5.0, GPS, OpenEdition* (compatible with OpenRTX,
37,37 €tax excl.
89,68 € -50%20W 433 & 868 MHz antenna with 5m low-loss RF100 cable and male SMA connector for Lora, Meshtastic, etc.
58,46 €tax excl.
73,85 € -5%Evolution of the LILYGO TTGO T-BEAM SUPREME Meshtastic, IoT development board for the LoRa 433 MHz ISM band, with 802.11 b/g/n WIFI connection , Bluetooth/BLE 5, soldered 2.4cm OLED screen, L76K GPS
54,09 €tax excl.
68,33 € -5%Shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal
Copyright 2014-2025 - Passion Radio / 4 MY PEOPLE.
Les photos et coloris ne sont pas contractuels.